hexagon: clean up timer-regs.h

When building allmodconfig, there is a warning about TIMER_ENABLE being
redefined:

  drivers/clocksource/timer-oxnas-rps.c:39:9: error: 'TIMER_ENABLE' macro redefined [-Werror,-Wmacro-redefined]
  #define TIMER_ENABLE            BIT(7)
          ^
  arch/hexagon/include/asm/timer-regs.h:13:9: note: previous definition is here
  #define TIMER_ENABLE            0
           ^
  1 error generated.

The values in this header are only used in one file each, if they are
used at all.  Remove the header and sink all of the constants into their
respective files.

TCX0_CLK_RATE is only used in arch/hexagon/include/asm/timex.h

TIMER_ENABLE, RTOS_TIMER_INT, RTOS_TIMER_REGS_ADDR are only used in
arch/hexagon/kernel/time.c.

SLEEP_CLK_RATE and TIMER_CLR_ON_MATCH have both been unused since the
file's introduction in commit 71e4a47f ("Hexagon: Add time and timer
functions").

TIMER_ENABLE is redefined as BIT(0) so the shift is moved into the
definition, rather than its use.

Link: https://lkml.kernel.org/r/20211115174250.1994179-3-nathan@kernel.orgSigned-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Brian Cain <bcain@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/hexagon/include/asm/timer-regs.h

-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Timer support for Hexagon
- *
- * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
- */
-
-#ifndef _ASM_TIMER_REGS_H
-#define _ASM_TIMER_REGS_H
-
-/*  This stuff should go into a platform specific file  */
-#define TCX0_CLK_RATE		19200
-#define TIMER_ENABLE		0
-#define TIMER_CLR_ON_MATCH	1
-
-/*
- * 8x50 HDD Specs 5-8.  Simulator co-sim not fixed until
- * release 1.1, and then it's "adjustable" and probably not defaulted.
- */
-#define RTOS_TIMER_INT		3
-#ifdef CONFIG_HEXAGON_COMET
-#define RTOS_TIMER_REGS_ADDR	0xAB000000UL
-#endif
-#define SLEEP_CLK_RATE		32000
-
-#endif

arch/hexagon/include/asm/timex.h

@@ -7,11 +7,10 @@
 #define _ASM_TIMEX_H
 
 #include <asm-generic/timex.h>
-#include <asm/timer-regs.h>
 #include <asm/hexagon_vm.h>
 
 /* Using TCX0 as our clock.  CLOCK_TICK_RATE scheduled to be removed. */
-#define CLOCK_TICK_RATE              TCX0_CLK_RATE
+#define CLOCK_TICK_RATE              19200
 
 #define ARCH_HAS_READ_CURRENT_TIMER
 

arch/hexagon/kernel/time.c

@@ -17,9 +17,10 @@
 #include <linux/of_irq.h>
 #include <linux/module.h>
 
-#include <asm/timer-regs.h>
 #include <asm/hexagon_vm.h>
 
+#define TIMER_ENABLE		BIT(0)
+
 /*
  * For the clocksource we need:
  *	pcycle frequency (600MHz)
@@ -33,6 +34,13 @@ cycles_t	pcycle_freq_mhz;
 cycles_t	thread_freq_mhz;
 cycles_t	sleep_clk_freq;
 
+/*
+ * 8x50 HDD Specs 5-8.  Simulator co-sim not fixed until
+ * release 1.1, and then it's "adjustable" and probably not defaulted.
+ */
+#define RTOS_TIMER_INT		3
+#define RTOS_TIMER_REGS_ADDR	0xAB000000UL
+
 static struct resource rtos_timer_resources[] = {
 	{
 		.start	= RTOS_TIMER_REGS_ADDR,
@@ -80,7 +88,7 @@ static int set_next_event(unsigned long delta, struct clock_event_device *evt)
 	iowrite32(0, &rtos_timer->clear);
 
 	iowrite32(delta, &rtos_timer->match);
-	iowrite32(1 << TIMER_ENABLE, &rtos_timer->enable);
+	iowrite32(TIMER_ENABLE, &rtos_timer->enable);
 	return 0;
 }