net: marvell: prestera: add phylink support

For SFP port prestera driver will use kernel
phylink infrastucture to configure port mode based on
the module that has beed inserted
Co-developed-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu>
Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu>
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/marvell/prestera/Kconfig

@@ -8,6 +8,7 @@ config PRESTERA
 	depends on NET_SWITCHDEV && VLAN_8021Q
 	depends on BRIDGE || BRIDGE=n
 	select NET_DEVLINK
+	select PHYLINK
 	help
 	  This driver supports Marvell Prestera Switch ASICs family.
 

drivers/net/ethernet/marvell/prestera/prestera.h

@@ -7,6 +7,7 @@
 #include <linux/notifier.h>
 #include <linux/skbuff.h>
 #include <linux/workqueue.h>
+#include <linux/phylink.h>
 #include <net/devlink.h>
 #include <uapi/linux/if_ether.h>
 
@@ -92,6 +93,7 @@ struct prestera_lag {
 struct prestera_flow_block;
 
 struct prestera_port_mac_state {
+	bool valid;
 	u32 mode;
 	u32 speed;
 	bool oper;
@@ -151,6 +153,13 @@ struct prestera_port {
 	struct prestera_port_phy_config cfg_phy;
 	struct prestera_port_mac_state state_mac;
 	struct prestera_port_phy_state state_phy;
+
+	struct phylink_config phy_config;
+	struct phylink *phy_link;
+	struct phylink_pcs phylink_pcs;
+
+	/* protects state_mac */
+	spinlock_t state_mac_lock;
 };
 
 struct prestera_device {
@@ -291,6 +300,7 @@ struct prestera_switch {
 	u32 mtu_min;
 	u32 mtu_max;
 	u8 id;
+	struct device_node *np;
 	struct prestera_router *router;
 	struct prestera_lag *lags;
 	struct prestera_counter *counter;

drivers/net/ethernet/marvell/prestera/prestera_ethtool.c

@@ -521,6 +521,9 @@ prestera_ethtool_get_link_ksettings(struct net_device *dev,
 	ecmd->base.speed = SPEED_UNKNOWN;
 	ecmd->base.duplex = DUPLEX_UNKNOWN;
 
+	if (port->phy_link)
+		return phylink_ethtool_ksettings_get(port->phy_link, ecmd);
+
 	ecmd->base.autoneg = port->autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE;
 
 	if (port->caps.type == PRESTERA_PORT_TYPE_TP) {
@@ -648,6 +651,9 @@ prestera_ethtool_set_link_ksettings(struct net_device *dev,
 	u8 adver_fec;
 	int err;
 
+	if (port->phy_link)
+		return phylink_ethtool_ksettings_set(port->phy_link, ecmd);
+
 	err = prestera_port_type_set(ecmd, port);
 	if (err)
 		return err;
@@ -782,28 +788,6 @@ static int prestera_ethtool_nway_reset(struct net_device *dev)
 	return -EINVAL;
 }
 
-void prestera_ethtool_port_state_changed(struct prestera_port *port,
-					 struct prestera_port_event *evt)
-{
-	struct prestera_port_mac_state *smac = &port->state_mac;
-
-	smac->oper = evt->data.mac.oper;
-
-	if (smac->oper) {
-		smac->mode = evt->data.mac.mode;
-		smac->speed = evt->data.mac.speed;
-		smac->duplex = evt->data.mac.duplex;
-		smac->fc = evt->data.mac.fc;
-		smac->fec = evt->data.mac.fec;
-	} else {
-		smac->mode = PRESTERA_MAC_MODE_MAX;
-		smac->speed = SPEED_UNKNOWN;
-		smac->duplex = DUPLEX_UNKNOWN;
-		smac->fc = 0;
-		smac->fec = 0;
-	}
-}
-
 const struct ethtool_ops prestera_ethtool_ops = {
 	.get_drvinfo = prestera_ethtool_get_drvinfo,
 	.get_link_ksettings = prestera_ethtool_get_link_ksettings,

drivers/net/ethernet/marvell/prestera/prestera_ethtool.h

@@ -11,7 +11,4 @@ struct prestera_port;
 
 extern const struct ethtool_ops prestera_ethtool_ops;
 
-void prestera_ethtool_port_state_changed(struct prestera_port *port,
-					 struct prestera_port_event *evt);
-
 #endif /* _PRESTERA_ETHTOOL_H_ */