soc: add aspeed folder and misc drivers

Create a SoC folder for the ASPEED parts and place the misc drivers
currently present into this folder.  These drivers are not generic part
drivers, but rather only apply to the ASPEED SoCs.
Signed-off-by: Patrick Venture <venture@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

drivers/misc/Kconfig

@@ -496,22 +496,6 @@ config VEXPRESS_SYSCFG
 	  bus. System Configuration interface is one of the possible means
 	  of generating transactions on this bus.
 
-config ASPEED_LPC_CTRL
-	depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON
-	tristate "Aspeed ast2400/2500 HOST LPC to BMC bridge control"
-	---help---
-	  Control Aspeed ast2400/2500 HOST LPC to BMC mappings through
-	  ioctl()s, the driver also provides a read/write interface to a BMC ram
-	  region where the host LPC read/write region can be buffered.
-
-config ASPEED_LPC_SNOOP
-	tristate "Aspeed ast2500 HOST LPC snoop support"
-	depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON
-	help
-	  Provides a driver to control the LPC snoop interface which
-	  allows the BMC to listen on and save the data written by
-	  the host to an arbitrary LPC I/O port.
-
 config PCI_ENDPOINT_TEST
 	depends on PCI
 	select CRC32

drivers/misc/Makefile

@@ -54,8 +54,6 @@ obj-$(CONFIG_GENWQE)		+= genwqe/
 obj-$(CONFIG_ECHO)		+= echo/
 obj-$(CONFIG_VEXPRESS_SYSCFG)	+= vexpress-syscfg.o
 obj-$(CONFIG_CXL_BASE)		+= cxl/
-obj-$(CONFIG_ASPEED_LPC_CTRL)	+= aspeed-lpc-ctrl.o
-obj-$(CONFIG_ASPEED_LPC_SNOOP)	+= aspeed-lpc-snoop.o
 obj-$(CONFIG_PCI_ENDPOINT_TEST)	+= pci_endpoint_test.o
 obj-$(CONFIG_OCXL)		+= ocxl/
 obj-y				+= cardreader/

drivers/soc/Kconfig

@@ -2,6 +2,7 @@ menu "SOC (System On Chip) specific Drivers"
 
 source "drivers/soc/actions/Kconfig"
 source "drivers/soc/amlogic/Kconfig"
+source "drivers/soc/aspeed/Kconfig"
 source "drivers/soc/atmel/Kconfig"
 source "drivers/soc/bcm/Kconfig"
 source "drivers/soc/fsl/Kconfig"

drivers/soc/Makefile

@@ -4,6 +4,7 @@
 #
 
 obj-$(CONFIG_ARCH_ACTIONS)	+= actions/
+obj-$(CONFIG_ARCH_ASPEED)	+= aspeed/
 obj-$(CONFIG_ARCH_AT91)		+= atmel/
 obj-y				+= bcm/
 obj-$(CONFIG_ARCH_DOVE)		+= dove/

drivers/soc/aspeed/Kconfig

+menu "Aspeed SoC drivers"
+
+config ASPEED_LPC_CTRL
+	depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON
+	tristate "Aspeed ast2400/2500 HOST LPC to BMC bridge control"
+	---help---
+	  Control Aspeed ast2400/2500 HOST LPC to BMC mappings through
+	  ioctl()s, the driver also provides a read/write interface to a BMC ram
+	  region where the host LPC read/write region can be buffered.
+
+config ASPEED_LPC_SNOOP
+	tristate "Aspeed ast2500 HOST LPC snoop support"
+	depends on (ARCH_ASPEED || COMPILE_TEST) && REGMAP && MFD_SYSCON
+	help
+	  Provides a driver to control the LPC snoop interface which
+	  allows the BMC to listen on and save the data written by
+	  the host to an arbitrary LPC I/O port.
+
+

drivers/soc/aspeed/Makefile

+obj-$(CONFIG_ASPEED_LPC_CTRL)	+= aspeed-lpc-ctrl.o
+obj-$(CONFIG_ASPEED_LPC_SNOOP)	+= aspeed-lpc-snoop.o