Merge tag 'stm32-dt-for-v5.14-1' of...

Merge tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT updates for v5.14, round 1

Highlights:
-----------

MCU part:
 - Fixes for Yaml verifications

MPU part:
 - Configure qspi's mdma transfer to block for stm32mp151

 - ST boards:
  - Fixes for yaml verifications

 - DH boards:
  - Fixes for yaml verifications
  - Rework of LAN8710i on DHCOM SoM to fit with requested reset sequence.

 - Odyssey boards:
  - fix Sd card detectection (gpio line updated)
  - fix eMMC VQMMC suuply (use vdd instead of v3v3)

* tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32: fix stpmic node for stm32mp1 boards
  ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoM
  ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoM
  ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM
  ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply
  ARM: dts: stm32: add a new DCMI pins group on stm32mp15
  ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7
  dt-bindings: net: document ptp_ref clk in dwmac
  ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15
  ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings
  ARM: dts: stm32: update pinctrl node name on STM32 MCU to prevent warnings
  ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings
  ARM: dts: stm32: fix RCC node name on stm32f429 MCU
  ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards
  ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin
  ARM: dts: stm32: Configure qspi's mdma transfer to block for stm32mp151
  ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2
  ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2
  ARM: dts: stm32: Rework LAN8710Ai PHY reset on DHCOM SoM

Link: https://lore.kernel.org/r/e4bfb255-63fb-74a8-d591-eb09821c93ee@foss.st.comSigned-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/net/stm32-dwmac.yaml

@@ -46,17 +46,18 @@ properties:
 
   clocks:
     minItems: 3
-    maxItems: 5
+    maxItems: 6
     items:
       - description: GMAC main clock
       - description: MAC TX clock
       - description: MAC RX clock
       - description: For MPU family, used for power mode
       - description: For MPU family, used for PHY without quartz
+      - description: PTP clock
 
   clock-names:
     minItems: 3
-    maxItems: 5
+    maxItems: 6
     contains:
       enum:
         - stmmaceth
@@ -64,6 +65,7 @@ properties:
         - mac-clk-rx
         - ethstp
         - eth-ck
+        - ptp_ref
 
   st,syscon:
     $ref: "/schemas/types.yaml#/definitions/phandle-array"

arch/arm/boot/dts/stm32429i-eval.dts

@@ -119,17 +119,15 @@ led-blue {
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "Wake up";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioa 0 0>;
 		};
-		button@1 {
+		button-1 {
 			label = "Tamper";
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpioc 13 0>;

arch/arm/boot/dts/stm32746g-eval.dts

@@ -81,12 +81,10 @@ led-blue {
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "Wake up";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioc 13 0>;

arch/arm/boot/dts/stm32f4-pinctrl.dtsi

@@ -45,7 +45,7 @@
 
 / {
 	soc {
-		pinctrl: pin-controller {
+		pinctrl: pin-controller@40020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x40020000 0x3000>;

arch/arm/boot/dts/stm32f429-disco.dts

@@ -81,12 +81,10 @@ led-green {
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpioa 0 0>;

arch/arm/boot/dts/stm32f429-pinctrl.dtsi

@@ -42,54 +42,50 @@
 
 #include "stm32f4-pinctrl.dtsi"
 
-/ {
-	soc {
-		pinctrl: pin-controller {
-			compatible = "st,stm32f429-pinctrl";
+&pinctrl {
+	compatible = "st,stm32f429-pinctrl";
 
-			gpioa: gpio@40020000 {
-				gpio-ranges = <&pinctrl 0 0 16>;
-			};
+	gpioa: gpio@40020000 {
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
 
-			gpiob: gpio@40020400 {
-				gpio-ranges = <&pinctrl 0 16 16>;
-			};
+	gpiob: gpio@40020400 {
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
 
-			gpioc: gpio@40020800 {
-				gpio-ranges = <&pinctrl 0 32 16>;
-			};
+	gpioc: gpio@40020800 {
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
 
-			gpiod: gpio@40020c00 {
-				gpio-ranges = <&pinctrl 0 48 16>;
-			};
+	gpiod: gpio@40020c00 {
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
 
-			gpioe: gpio@40021000 {
-				gpio-ranges = <&pinctrl 0 64 16>;
-			};
+	gpioe: gpio@40021000 {
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
 
-			gpiof: gpio@40021400 {
-				gpio-ranges = <&pinctrl 0 80 16>;
-			};
+	gpiof: gpio@40021400 {
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
 
-			gpiog: gpio@40021800 {
-				gpio-ranges = <&pinctrl 0 96 16>;
-			};
+	gpiog: gpio@40021800 {
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
 
-			gpioh: gpio@40021c00 {
-				gpio-ranges = <&pinctrl 0 112 16>;
-			};
+	gpioh: gpio@40021c00 {
+		gpio-ranges = <&pinctrl 0 112 16>;
+	};
 
-			gpioi: gpio@40022000 {
-				gpio-ranges = <&pinctrl 0 128 16>;
-			};
+	gpioi: gpio@40022000 {
+		gpio-ranges = <&pinctrl 0 128 16>;
+	};
 
-			gpioj: gpio@40022400 {
-				gpio-ranges = <&pinctrl 0 144 16>;
-			};
+	gpioj: gpio@40022400 {
+		gpio-ranges = <&pinctrl 0 144 16>;
+	};
 
-			gpiok: gpio@40022800 {
-				gpio-ranges = <&pinctrl 0 160 8>;
-			};
-		};
+	gpiok: gpio@40022800 {
+		gpio-ranges = <&pinctrl 0 160 8>;
 	};
 };

arch/arm/boot/dts/stm32f429.dtsi

@@ -283,8 +283,6 @@ timer@11 {
 		};
 
 		timers13: timers@40001c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40001C00 0x400>;
 			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM13)>;
@@ -299,8 +297,6 @@ pwm {
 		};
 
 		timers14: timers@40002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40002000 0x400>;
 			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM14)>;
@@ -633,8 +629,6 @@ timer@8 {
 		};
 
 		timers10: timers@40014400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014400 0x400>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM10)>;
@@ -649,8 +643,6 @@ pwm {
 		};
 
 		timers11: timers@40014800 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014800 0x400>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM11)>;
@@ -709,7 +701,7 @@ crc: crc@40023000 {
 			status = "disabled";
 		};
 
-		rcc: rcc@40023810 {
+		rcc: rcc@40023800 {
 			#reset-cells = <1>;
 			#clock-cells = <2>;
 			compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";

arch/arm/boot/dts/stm32f469-disco.dts

@@ -104,12 +104,10 @@ led-blue {
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;

arch/arm/boot/dts/stm32f469-pinctrl.dtsi

@@ -42,55 +42,51 @@
 
 #include "stm32f4-pinctrl.dtsi"
 
-/ {
-	soc {
-		pinctrl: pin-controller {
-			compatible = "st,stm32f469-pinctrl";
+&pinctrl {
+	compatible = "st,stm32f469-pinctrl";
 
-			gpioa: gpio@40020000 {
-				gpio-ranges = <&pinctrl 0 0 16>;
-			};
+	gpioa: gpio@40020000 {
+		gpio-ranges = <&pinctrl 0 0 16>;
+	};
 
-			gpiob: gpio@40020400 {
-				gpio-ranges = <&pinctrl 0 16 16>;
-			};
+	gpiob: gpio@40020400 {
+		gpio-ranges = <&pinctrl 0 16 16>;
+	};
 
-			gpioc: gpio@40020800 {
-				gpio-ranges = <&pinctrl 0 32 16>;
-			};
+	gpioc: gpio@40020800 {
+		gpio-ranges = <&pinctrl 0 32 16>;
+	};
 
-			gpiod: gpio@40020c00 {
-				gpio-ranges = <&pinctrl 0 48 16>;
-			};
+	gpiod: gpio@40020c00 {
+		gpio-ranges = <&pinctrl 0 48 16>;
+	};
 
-			gpioe: gpio@40021000 {
-				gpio-ranges = <&pinctrl 0 64 16>;
-			};
+	gpioe: gpio@40021000 {
+		gpio-ranges = <&pinctrl 0 64 16>;
+	};
 
-			gpiof: gpio@40021400 {
-				gpio-ranges = <&pinctrl 0 80 16>;
-			};
+	gpiof: gpio@40021400 {
+		gpio-ranges = <&pinctrl 0 80 16>;
+	};
 
-			gpiog: gpio@40021800 {
-				gpio-ranges = <&pinctrl 0 96 16>;
-			};
+	gpiog: gpio@40021800 {
+		gpio-ranges = <&pinctrl 0 96 16>;
+	};
 
-			gpioh: gpio@40021c00 {
-				gpio-ranges = <&pinctrl 0 112 16>;
-			};
+	gpioh: gpio@40021c00 {
+		gpio-ranges = <&pinctrl 0 112 16>;
+	};
 
-			gpioi: gpio@40022000 {
-				gpio-ranges = <&pinctrl 0 128 16>;
-			};
+	gpioi: gpio@40022000 {
+		gpio-ranges = <&pinctrl 0 128 16>;
+	};
 
-			gpioj: gpio@40022400 {
-				gpio-ranges = <&pinctrl 0 144 6>,
-					      <&pinctrl 12 156 4>;
-			};
+	gpioj: gpio@40022400 {
+		gpio-ranges = <&pinctrl 0 144 6>,
+			      <&pinctrl 12 156 4>;
+	};
 
-			gpiok: gpio@40022800 {
-				gpio-ranges = <&pinctrl 3 163 5>;
-			};
-		};
+	gpiok: gpio@40022800 {
+		gpio-ranges = <&pinctrl 3 163 5>;
 	};
 };

arch/arm/boot/dts/stm32f7-pinctrl.dtsi

@@ -9,7 +9,7 @@
 
 / {
 	soc {
-		pinctrl: pin-controller {
+		pinctrl: pin-controller@40020000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x40020000 0x3000>;

arch/arm/boot/dts/stm32f746.dtsi

@@ -265,8 +265,6 @@ timer@11 {
 		};
 
 		timers13: timers@40001c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40001C00 0x400>;
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>;
@@ -281,8 +279,6 @@ pwm {
 		};
 
 		timers14: timers@40002000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40002000 0x400>;
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>;
@@ -364,9 +360,9 @@ i2c2: i2c@40005800 {
 			status = "disabled";
 		};
 
-		i2c3: i2c@40005C00 {
+		i2c3: i2c@40005c00 {
 			compatible = "st,stm32f7-i2c";
-			reg = <0x40005C00 0x400>;
+			reg = <0x40005c00 0x400>;
 			interrupts = <72>,
 				     <73>;
 			resets = <&rcc STM32F7_APB1_RESET(I2C3)>;
@@ -531,8 +527,6 @@ timer@8 {
 		};
 
 		timers10: timers@40014400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014400 0x400>;
 			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>;
@@ -547,8 +541,6 @@ pwm {
 		};
 
 		timers11: timers@40014800 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-timers";
 			reg = <0x40014800 0x400>;
 			clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>;

arch/arm/boot/dts/stm32f769-disco.dts

@@ -75,12 +75,10 @@ led-red {
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
-		button@0 {
+		button-0 {
 			label = "User";
 			linux,code = <KEY_HOME>;
 			gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>;

arch/arm/boot/dts/stm32h743.dtsi

@@ -485,8 +485,6 @@ trigger@2 {
 		};
 
 		lptimer4: timer@58002c00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-lptimer";
 			reg = <0x58002c00 0x400>;
 			clocks = <&rcc LPTIM4_CK>;
@@ -501,8 +499,6 @@ pwm {
 		};
 
 		lptimer5: timer@58003000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			compatible = "st,stm32-lptimer";
 			reg = <0x58003000 0x400>;
 			clocks = <&rcc LPTIM5_CK>;

arch/arm/boot/dts/stm32mp15-pinctrl.dtsi

@@ -118,6 +118,39 @@ pins {
 		};
 	};
 
+	dcmi_pins_b: dcmi-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4,  AF13)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  AF13)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  AF13)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('C', 6,  AF13)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
+				 <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */
+				 <STM32_PINMUX('E', 1,  AF13)>,/* DCMI_D3 */
+				 <STM32_PINMUX('E', 11, AF13)>,/* DCMI_D4 */
+				 <STM32_PINMUX('D', 3,  AF13)>,/* DCMI_D5 */
+				 <STM32_PINMUX('E', 13, AF13)>,/* DCMI_D6 */
+				 <STM32_PINMUX('B', 9,  AF13)>;/* DCMI_D7 */
+			bias-disable;
+		};
+	};
+
+	dcmi_sleep_pins_b: dcmi-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 4,  ANALOG)>,/* DCMI_HSYNC */
+				 <STM32_PINMUX('B', 7,  ANALOG)>,/* DCMI_VSYNC */
+				 <STM32_PINMUX('A', 6,  ANALOG)>,/* DCMI_PIXCLK */
+				 <STM32_PINMUX('C', 6,  ANALOG)>,/* DCMI_D0 */
+				 <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
+				 <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */
+				 <STM32_PINMUX('E', 1,  ANALOG)>,/* DCMI_D3 */
+				 <STM32_PINMUX('E', 11, ANALOG)>,/* DCMI_D4 */
+				 <STM32_PINMUX('D', 3,  ANALOG)>,/* DCMI_D5 */
+				 <STM32_PINMUX('E', 13, ANALOG)>,/* DCMI_D6 */
+				 <STM32_PINMUX('B', 9,  ANALOG)>;/* DCMI_D7 */
+		};
+	};
+
 	ethernet0_rgmii_pins_a: rgmii-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */

arch/arm/boot/dts/stm32mp151.dtsi

@@ -1369,8 +1369,8 @@ qspi: spi@58003000 {
 			reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
 			reg-names = "qspi", "qspi_mm";
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&mdma1 22 0x2 0x100002 0x0 0x0>,
-			       <&mdma1 22 0x2 0x100008 0x0 0x0>;
+			dmas = <&mdma1 22 0x2 0x10100002 0x0 0x0>,
+			       <&mdma1 22 0x2 0x10100008 0x0 0x0>;
 			dma-names = "tx", "rx";
 			clocks = <&rcc QSPI_K>;
 			resets = <&rcc QSPI_R>;
@@ -1416,12 +1416,6 @@ crc1: crc@58009000 {
 			status = "disabled";
 		};
 
-		stmmac_axi_config_0: stmmac-axi-config {
-			snps,wr_osr_lmt = <0x7>;
-			snps,rd_osr_lmt = <0x7>;
-			snps,blen = <0 0 0 0 16 8 4>;
-		};
-
 		ethernet0: ethernet@5800a000 {
 			compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
 			reg = <0x5800a000 0x2000>;
@@ -1447,6 +1441,12 @@ ethernet0: ethernet@5800a000 {
 			snps,axi-config = <&stmmac_axi_config_0>;
 			snps,tso;
 			status = "disabled";
+
+			stmmac_axi_config_0: stmmac-axi-config {
+				snps,wr_osr_lmt = <0x7>;
+				snps,rd_osr_lmt = <0x7>;
+				snps,blen = <0 0 0 0 16 8 4>;
+			};
 		};
 
 		usbh_ohci: usb@5800c000 {

arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts

@@ -89,7 +89,7 @@ ltdc_ep0_out: endpoint@0 {
 };
 
 &pinctrl {
-	ltdc_pins: ltdc {
+	ltdc_pins: ltdc-0 {
 		pins {
 			pinmux = <STM32_PINMUX('G', 10, AF14)>,	/* LTDC_B2 */
 				 <STM32_PINMUX('H', 12, AF14)>,	/* LTDC_R6 */

arch/arm/boot/dts/stm32mp157a-stinger96.dtsi

@@ -184,8 +184,6 @@ vtt_ddr: ldo3 {
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -208,7 +206,6 @@ v1v8: ldo6 {
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			bst_out: boost {
@@ -219,13 +216,13 @@ bst_out: boost {
 			vbus_otg: pwr_sw1 {
 				regulator-name = "vbus_otg";
 				interrupts = <IT_OCP_OTG 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 
 			vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 		};
 

arch/arm/boot/dts/stm32mp157c-odyssey-som.dtsi

@@ -173,8 +173,6 @@ vtt_ddr: ldo3 {
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -197,7 +195,6 @@ v1v2_hdmi: ldo6 {
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			 bst_out: boost {
@@ -213,7 +210,7 @@ vbus_otg: pwr_sw1 {
 			 vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			 };
 		};
 
@@ -269,7 +266,7 @@ &sdmmc2 {
 	st,neg-edge;
 	bus-width = <8>;
 	vmmc-supply = <&v3v3>;
-	vqmmc-supply = <&v3v3>;
+	vqmmc-supply = <&vdd>;
 	mmc-ddr-3_3v;
 	status = "okay";
 };

arch/arm/boot/dts/stm32mp157c-odyssey.dts

@@ -64,7 +64,7 @@ &sdmmc1 {
 	pinctrl-0 = <&sdmmc1_b4_pins_a>;
 	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
 	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	cd-gpios = <&gpioi 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
 	disable-wp;
 	st,neg-edge;
 	bus-width = <4>;

arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi

@@ -34,7 +34,6 @@ display_bl: display-bl {
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#size-cells = <0>;
 		poll-interval = <20>;
 
 		/*
@@ -60,7 +59,6 @@ button-2 {
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#size-cells = <0>;
 
 		button-1 {
 			label = "TA2-GPIO-B";
@@ -184,12 +182,11 @@ sgtl5000_rx_endpoint: endpoint@1 {
 
 	};
 
-	polytouch@38 {
-		compatible = "edt,edt-ft5x06";
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
 		reg = <0x38>;
 		interrupt-parent = <&gpiog>;
 		interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
-		linux,wakeup;
 	};
 };
 

arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi

@@ -123,7 +123,6 @@ &ethernet0 {
 	max-speed = <100>;
 	phy-handle = <&phy0>;
 	st,eth-ref-clk-sel;
-	phy-reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
 
 	mdio0 {
 		#address-cells = <1>;
@@ -132,6 +131,13 @@ mdio0 {
 
 		phy0: ethernet-phy@1 {
 			reg = <1>;
+			/* LAN8710Ai */
+			compatible = "ethernet-phy-id0007.c0f0",
+				     "ethernet-phy-ieee802.3-c22";
+			clocks = <&rcc ETHCK_K>;
+			reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500>;
+			reset-deassert-us = <500>;
 			interrupt-parent = <&gpioi>;
 			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		};
@@ -144,7 +150,7 @@ &fmc {
 	pinctrl-1 = <&fmc_sleep_pins_b>;
 	status = "okay";
 
-	ksz8851: ks8851mll@1,0 {
+	ksz8851: ethernet@1,0 {
 		compatible = "micrel,ks8851-mll";
 		reg = <1 0x0 0x2>, <1 0x2 0x20000>;
 		interrupt-parent = <&gpioc>;
@@ -327,8 +333,6 @@ vtt_ddr: ldo3 {
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -350,7 +354,6 @@ v1v8: ldo6 {
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			bst_out: boost {
@@ -366,7 +369,7 @@ vbus_otg: pwr_sw1 {
 			vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 		};
 
@@ -431,7 +434,7 @@ &qspi {
 	#size-cells = <0>;
 	status = "okay";
 
-	flash0: mx66l51235l@0 {
+	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-rx-bus-width = <4>;

arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi

@@ -198,7 +198,7 @@ &qspi {
 	#size-cells = <0>;
 	status = "okay";
 
-	flash0: spi-flash@0 {
+	flash0: flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-rx-bus-width = <4>;

arch/arm/boot/dts/stm32mp15xx-osd32.dtsi

@@ -146,8 +146,6 @@ vtt_ddr: ldo3 {
 
 			vdd_usb: ldo4 {
 				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
 				interrupts = <IT_CURLIM_LDO4 0>;
 			};
 
@@ -171,7 +169,6 @@ v1v2_hdmi: ldo6 {
 			vref_ddr: vref_ddr {
 				regulator-name = "vref_ddr";
 				regulator-always-on;
-				regulator-over-current-protection;
 			};
 
 			bst_out: boost {
@@ -182,13 +179,13 @@ bst_out: boost {
 			vbus_otg: pwr_sw1 {
 				regulator-name = "vbus_otg";
 				interrupts = <IT_OCP_OTG 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 
 			vbus_sw: pwr_sw2 {
 				regulator-name = "vbus_sw";
 				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 		};