Commit 52d0974e authored by Subhash Jadavani's avatar Subhash Jadavani Committed by Chris Ball

mmc: core: hs200 fixes

This patch fixes following issues when HS200 is enabled:

1. If executing_tuning() host ops is called without mmc_host_clk_hold(),
   card clocks might get turned off (if MMC_CLK_GATING is enabled)
   while execute_tuning() is in progress. So this patch makes sure
   that execute_tuning() is called with mmc_host_clk_hold().

2. If host timing mode is set to HS200 mode, there should not be
   any communication with the card until execute_tuning() is completed.
   But there is a chance that CMD6 might be sent to enable set HPI_EN
   (of HPI_MGMT field in EXT_CSD) before execute_tuning() is called.
   So this patch moves this operation after execute_tuning() is completed.
Signed-off-by: default avatarSubhash Jadavani <subhashj@codeaurora.org>
Reviewed-by: girish.shivananjappa@linaro.org
Signed-off-by: default avatarChris Ball <cjb@laptop.org>
parent 37f6190d
......@@ -1046,22 +1046,6 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
}
}
/*
* Enable HPI feature (if supported)
*/
if (card->ext_csd.hpi) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_HPI_MGMT, 1, 0);
if (err && err != -EBADMSG)
goto free_card;
if (err) {
pr_warning("%s: Enabling HPI failed\n",
mmc_hostname(card->host));
err = 0;
} else
card->ext_csd.hpi_en = 1;
}
/*
* Compute bus speed.
*/
......@@ -1111,9 +1095,12 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
* 4. execute tuning for HS200
*/
if ((host->caps2 & MMC_CAP2_HS200) &&
card->host->ops->execute_tuning)
card->host->ops->execute_tuning) {
mmc_host_clk_hold(card->host);
err = card->host->ops->execute_tuning(card->host,
MMC_SEND_TUNING_BLOCK_HS200);
mmc_host_clk_release(card->host);
}
if (err) {
pr_warning("%s: tuning execution failed\n",
mmc_hostname(card->host));
......@@ -1232,6 +1219,23 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
}
}
/*
* Enable HPI feature (if supported)
*/
if (card->ext_csd.hpi) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_HPI_MGMT, 1,
card->ext_csd.generic_cmd6_time);
if (err && err != -EBADMSG)
goto free_card;
if (err) {
pr_warning("%s: Enabling HPI failed\n",
mmc_hostname(card->host));
err = 0;
} else
card->ext_csd.hpi_en = 1;
}
/*
* If cache size is higher than 0, this indicates
* the existence of cache and it can be turned on.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment