Commit 52ded6f9 authored by Christophe Kerello's avatar Christophe Kerello Committed by Alexandre Torgue

ARM: dts: stm32: add FMC2 NAND controller pins muxing on stm32mp157c-ev1

This patch adds FMC2 NAND controller pins muxing used on stm32mp157c-ev1.
Signed-off-by: default avatarChristophe Kerello <christophe.kerello@st.com>
Signed-off-by: default avatarAlexandre Torgue <alexandre.torgue@st.com>
parent aafa0ae3
......@@ -276,6 +276,50 @@ pins1 {
};
};
fmc_pins_a: fmc-0 {
pins1 {
pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
<STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
<STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
<STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
<STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
<STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
<STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
<STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
<STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
<STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
<STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
<STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
<STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
bias-disable;
drive-push-pull;
slew-rate = <1>;
};
pins2 {
pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
bias-pull-up;
};
};
fmc_sleep_pins_a: fmc-sleep-0 {
pins {
pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
<STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
<STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */
<STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */
<STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
<STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
<STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
<STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
<STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
<STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
<STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
<STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
<STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */
<STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */
};
};
i2c1_pins_a: i2c1-0 {
pins {
pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment