Staging Comedi: fix spacing around parens

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/comedi/drivers.c

@@ -198,7 +198,7 @@ int comedi_driver_unregister(struct comedi_driver *driver)
 		struct comedi_device_file_info *dev_file_info = comedi_get_device_file_info(i);
 		struct comedi_device *dev;
 
-		if(dev_file_info == NULL) continue;
+		if (dev_file_info == NULL) continue;
 		dev = dev_file_info->device;
 
 		mutex_lock(&dev->mutex);
@@ -801,7 +801,7 @@ int comedi_auto_config(struct device *hardware_device, const char *board_name, c
 	}
 
 	minor = comedi_alloc_board_minor(hardware_device);
-	if(minor < 0) return minor;
+	if (minor < 0) return minor;
 
 	private_data = kmalloc(sizeof(unsigned), GFP_KERNEL);
 	if (private_data == NULL) {
@@ -824,7 +824,7 @@ int comedi_auto_config(struct device *hardware_device, const char *board_name, c
 	mutex_unlock(&dev_file_info->device->mutex);
 
 cleanup:
-	if(retval < 0)
+	if (retval < 0)
 	{
 		kfree(private_data);
 		comedi_free_board_minor(minor);
@@ -835,7 +835,7 @@ int comedi_auto_config(struct device *hardware_device, const char *board_name, c
 void comedi_auto_unconfig(struct device *hardware_device)
 {
 	unsigned *minor = (unsigned *)dev_get_drvdata(hardware_device);
-	if(minor == NULL) return;
+	if (minor == NULL) return;
 
 	BUG_ON(*minor >= COMEDI_NUM_BOARD_MINORS);
 

drivers/staging/comedi/drivers/addi-data/addi_common.c

@@ -2638,7 +2638,7 @@ static int i_ADDI_Attach(struct comedi_device *dev, struct comedi_devconfig *it)
 		devpriv->i_IobaseReserved = (int) io_addr[3];
 		printk("\nioremap begin");
 		devpriv->dw_AiBase =
-			(unsigned long ) ioremap(io_addr[3],
+			(unsigned long) ioremap(io_addr[3],
 			this_board->i_IorangeBase3);
 		printk("\nioremap end");
 	}

drivers/staging/comedi/drivers/addi-data/addi_eeprom.c

@@ -45,9 +45,9 @@ You shoud also find the complete GPL in the COPYING file accompanying this sourc
   +----------+-----------+------------------------------------------------+
 */
 
-#define NVCMD_BEGIN_READ 	(0x7 << 5 )	/*  nvRam begin read command */
-#define NVCMD_LOAD_LOW   	(0x4 << 5 )	/*  nvRam load low command */
-#define NVCMD_LOAD_HIGH  	(0x5 << 5 )	/*  nvRam load high command */
+#define NVCMD_BEGIN_READ 	(0x7 << 5)	/*  nvRam begin read command */
+#define NVCMD_LOAD_LOW   	(0x4 << 5)	/*  nvRam load low command */
+#define NVCMD_LOAD_HIGH  	(0x5 << 5)	/*  nvRam load high command */
 #define EE76_CMD_LEN    	13	/*  bits in instructions */
 #define EE_READ         	0x0180	/*  01 1000 0000 read instruction */
 

drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h

@@ -161,7 +161,7 @@ static const struct comedi_lrange range_apci3120_ao = { 2, {
 
 #define APCI3120_TIMER2_SELECT_EOS                0xC0	/*  ADDED on 20-6 */
 #define APCI3120_COUNTER                          3	/*  on 20-6 */
-#define APCI3120_DISABLE_ALL_TIMER                ( APCI3120_DISABLE_TIMER0 & APCI3120_DISABLE_TIMER1 & APCI3120_DISABLE_TIMER2 )	/*  on 20-6 */
+#define APCI3120_DISABLE_ALL_TIMER                (APCI3120_DISABLE_TIMER0 & APCI3120_DISABLE_TIMER1 & APCI3120_DISABLE_TIMER2)	/*  on 20-6 */
 
 #define MAX_ANALOGINPUT_CHANNELS    32
 

drivers/staging/comedi/drivers/adl_pci9111.c

@@ -252,15 +252,15 @@ Configuration options:
 
 #define pci9111_8254_counter_0_set(data) \
   outb(data & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_0); \
-  outb( (data >> 8) & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_0)
+  outb((data >> 8) & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_0)
 
 #define pci9111_8254_counter_1_set(data) \
   outb(data & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_1); \
-  outb( (data >> 8) & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_1)
+  outb((data >> 8) & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_1)
 
 #define pci9111_8254_counter_2_set(data) \
   outb(data & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_2); \
-  outb( (data >> 8) & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_2)
+  outb((data >> 8) & 0xFF, PCI9111_IO_BASE+PCI9111_REGISTER_8254_COUNTER_2)
 
 /*  Function prototypes */
 

drivers/staging/comedi/drivers/adq12b.c

@@ -101,17 +101,17 @@ If you do not specify any options, they will default to
 
 // available ranges through the PGA gains
 static const struct comedi_lrange range_adq12b_ai_bipolar = { 4, {
-        BIP_RANGE( 5 ),
-        BIP_RANGE( 2 ),
-        BIP_RANGE( 1 ),
-        BIP_RANGE( 0.5 )
+        BIP_RANGE(5),
+        BIP_RANGE(2),
+        BIP_RANGE(1),
+        BIP_RANGE(0.5)
 }};
 
 static const struct comedi_lrange range_adq12b_ai_unipolar = { 4, {
-        UNI_RANGE( 5 ),
-        UNI_RANGE( 2 ),
-        UNI_RANGE( 1 ),
-        UNI_RANGE( 0.5 )
+        UNI_RANGE(5),
+        UNI_RANGE(2),
+        UNI_RANGE(1),
+        UNI_RANGE(0.5)
 }};
 
 
@@ -219,7 +219,7 @@ static int adq12b_attach(struct comedi_device *dev, struct comedi_devconfig *it)
  * Allocate the private structure area.  alloc_private() is a
  * convenient macro defined in comedidev.h.
  */
-        if(alloc_private(dev, sizeof(struct adq12b_private)) < 0)
+        if (alloc_private (dev, sizeof (struct adq12b_private)) < 0)
           return -ENOMEM;
 
 /* fill in devpriv structure */
@@ -236,7 +236,7 @@ static int adq12b_attach(struct comedi_device *dev, struct comedi_devconfig *it)
  * Allocate the subdevice structures.  alloc_subdevice() is a
  * convenient macro defined in comedidev.h.
  */
-        if(alloc_subdevices(dev, 3)<0)
+        if (alloc_subdevices (dev, 3)<0)
            return -ENOMEM;
 
         s = dev->subdevices+0;
@@ -332,7 +332,7 @@ static int adq12b_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s
         status = inb(dev->iobase + ADQ12B_ADLOW);
 
         /* convert n samples */
-        for(n=0; n < insn->n; n++){
+        for (n=0; n < insn->n; n++){
 
           /* wait for end of convertion */
 	  i = 0;

drivers/staging/comedi/drivers/adv_pci1710.c

@@ -1347,20 +1347,20 @@ static int pci1710_attach(struct comedi_device *dev, struct comedi_devconfig *it
 	board_index = this_board - boardtypes;
 	while (NULL != (pcidev = pci_get_device(PCI_VENDOR_ID_ADVANTECH,
 		PCI_ANY_ID, pcidev))) {
-		if(strcmp(this_board->name, DRV_NAME) == 0)
+		if (strcmp (this_board->name, DRV_NAME) == 0)
 		{
-			for(i = 0; i < n_boardtypes; ++i)
+			for (i = 0; i < n_boardtypes; ++i)
 			{
-				if(pcidev->device == boardtypes[i].device_id)
+				if (pcidev->device == boardtypes[i].device_id)
 				{
 					board_index = i;
 					break;
 				}
 			}
-			if(i == n_boardtypes) continue;
+			if (i == n_boardtypes) continue;
 		}else
 		{
-			if(pcidev->device != boardtypes[board_index].device_id) continue;
+			if (pcidev->device != boardtypes[board_index].device_id) continue;
 		}
 
 		/* Found matching vendor/device. */

drivers/staging/comedi/drivers/am9513.h

@@ -51,14 +51,14 @@
 		Am9513_output_control(reg);			\
 		Am9513_output_data(val>>8);			\
 		Am9513_output_data(val&0xff);			\
-	}while(0)
+	}while (0)
 
 #define Am9513_read_register(reg, val)				\
 	do{							\
 		Am9513_output_control(reg);			\
 		val=Am9513_input_data()<<8;			\
 		val|=Am9513_input_data();			\
-	}while(0)
+	}while (0)
 
 #else /* Am9513_16BITBUS */
 
@@ -66,13 +66,13 @@
 	do{							\
 		Am9513_output_control(reg);			\
 		Am9513_output_data(val);			\
-	}while(0)
+	}while (0)
 
 #define Am9513_read_register(reg, val)				\
 	do{							\
 		Am9513_output_control(reg);			\
 		val=Am9513_input_data();			\
-	}while(0)
+	}while (0)
 
 #endif
 

drivers/staging/comedi/drivers/amplc_pc236.c

@@ -77,19 +77,19 @@ unused.
  * INTCSR values for PCI236.
  */
 /* Disable interrupt, also clear any interrupt there */
-#define PCI236_INTR_DISABLE ( PLX9052_INTCSR_LI1ENAB_DISABLED \
+#define PCI236_INTR_DISABLE (PLX9052_INTCSR_LI1ENAB_DISABLED \
         | PLX9052_INTCSR_LI1POL_HIGH \
         | PLX9052_INTCSR_LI2POL_HIGH \
         | PLX9052_INTCSR_PCIENAB_DISABLED \
         | PLX9052_INTCSR_LI1SEL_EDGE \
-        | PLX9052_INTCSR_LI1CLRINT_ASSERTED )
+        | PLX9052_INTCSR_LI1CLRINT_ASSERTED)
 /* Enable interrupt, also clear any interrupt there. */
-#define PCI236_INTR_ENABLE ( PLX9052_INTCSR_LI1ENAB_ENABLED \
+#define PCI236_INTR_ENABLE (PLX9052_INTCSR_LI1ENAB_ENABLED \
         | PLX9052_INTCSR_LI1POL_HIGH \
         | PLX9052_INTCSR_LI2POL_HIGH \
         | PLX9052_INTCSR_PCIENAB_ENABLED \
         | PLX9052_INTCSR_LI1SEL_EDGE \
-        | PLX9052_INTCSR_LI1CLRINT_ASSERTED )
+        | PLX9052_INTCSR_LI1CLRINT_ASSERTED)
 
 /*
  * Board descriptions for Amplicon PC36AT and PCI236.

drivers/staging/comedi/drivers/cb_pcidas64.c

@@ -98,7 +98,7 @@ known. If you have such a board, please file a bug report at
 /* #define PCIDAS64_DEBUG         enable debugging code */
 
 #ifdef PCIDAS64_DEBUG
-#define DEBUG_PRINT(format, args...)  rt_printk(format , ## args )
+#define DEBUG_PRINT(format, args...)  rt_printk(format , ## args)
 #else
 #define DEBUG_PRINT(format, args...)
 #endif

drivers/staging/comedi/drivers/dt282x.c

@@ -387,12 +387,12 @@ struct dt282x_private {
 #define wait_for(a, b)	 				\
 	do{						\
 		int _i;					\
-		for(_i=0;_i<DT2821_TIMEOUT;_i++){	\
-			if(a){_i=0;break;}		\
+		for (_i=0;_i<DT2821_TIMEOUT;_i++){	\
+			if (a){_i=0;break;}		\
 			comedi_udelay(5);			\
 		}					\
-		if(_i){b}				\
-	}while(0)
+		if (_i){b}				\
+	}while (0)
 
 static int dt282x_attach(struct comedi_device *dev, struct comedi_devconfig *it);
 static int dt282x_detach(struct comedi_device *dev);
@@ -1029,7 +1029,7 @@ static int dt282x_ao_cmdtest(struct comedi_device *dev, struct comedi_subdevice
 		cmd->start_arg = 0;
 		err++;
 	}
-	if (cmd->scan_begin_arg < 5000 /* XXX unknown */ ) {
+	if (cmd->scan_begin_arg < 5000 /* XXX unknown */) {
 		cmd->scan_begin_arg = 5000;
 		err++;
 	}
@@ -1302,7 +1302,7 @@ static int dt282x_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 
 		irq = probe_irq_off(irqs);
 		restore_flags(flags);
-		if (0 /* error */ ) {
+		if (0 /* error */) {
 			printk(" error probing irq (bad)");
 		}
 	}

drivers/staging/comedi/drivers/gsc_hpdi.c

@@ -66,7 +66,7 @@ static int dio_config_block_size(struct comedi_device * dev, unsigned int * data
 /* #define HPDI_DEBUG      enable debugging code */
 
 #ifdef HPDI_DEBUG
-#define DEBUG_PRINT(format, args...)  rt_printk(format , ## args )
+#define DEBUG_PRINT(format, args...)  rt_printk(format , ## args)
 #else
 #define DEBUG_PRINT(format, args...)
 #endif

drivers/staging/comedi/drivers/mpc624.c

@@ -110,13 +110,13 @@ Configuration Options:
  */
 
 #define MPC624_SPEED_3_52_kHz   (MPC624_OSR4                                           | MPC624_OSR0)
-#define MPC624_SPEED_1_76_kHz   (MPC624_OSR4                             | MPC624_OSR1              )
+#define MPC624_SPEED_1_76_kHz   (MPC624_OSR4                             | MPC624_OSR1)
 #define MPC624_SPEED_880_Hz     (MPC624_OSR4                             | MPC624_OSR1 | MPC624_OSR0)
-#define MPC624_SPEED_440_Hz     (MPC624_OSR4               | MPC624_OSR2                            )
+#define MPC624_SPEED_440_Hz     (MPC624_OSR4               | MPC624_OSR2)
 #define MPC624_SPEED_220_Hz     (MPC624_OSR4               | MPC624_OSR2               | MPC624_OSR0)
-#define MPC624_SPEED_110_Hz     (MPC624_OSR4               | MPC624_OSR2 | MPC624_OSR1              )
+#define MPC624_SPEED_110_Hz     (MPC624_OSR4               | MPC624_OSR2 | MPC624_OSR1)
 #define MPC624_SPEED_55_Hz      (MPC624_OSR4               | MPC624_OSR2 | MPC624_OSR1 | MPC624_OSR0)
-#define MPC624_SPEED_27_5_Hz    (MPC624_OSR4 | MPC624_OSR3                                          )
+#define MPC624_SPEED_27_5_Hz    (MPC624_OSR4 | MPC624_OSR3)
 #define MPC624_SPEED_13_75_Hz   (MPC624_OSR4 | MPC624_OSR3                             | MPC624_OSR0)
 #define MPC624_SPEED_6_875_Hz   (MPC624_OSR4 | MPC624_OSR3 | MPC624_OSR2 | MPC624_OSR1 | MPC624_OSR0)
 /* ---------------------------------------------------------------------------- */

drivers/staging/comedi/drivers/ni_660x.c

@@ -1161,7 +1161,7 @@ static void init_tio_chip(struct comedi_device *dev, int chipset)
 	ni_660x_write_register(dev, chipset,
 		private(dev)->dma_configuration_soft_copies[chipset],
 		DMAConfigRegister);
-	for(i = 0; i < NUM_PFI_CHANNELS; ++i)
+	for (i = 0; i < NUM_PFI_CHANNELS; ++i)
 	{
 		ni_660x_write_register(dev, chipset, 0, IOConfigReg(i));
 	}
@@ -1237,8 +1237,8 @@ static void ni_660x_select_pfi_output(struct comedi_device *dev, unsigned pfi_ch
 	unsigned active_bits;
 	unsigned idle_bits;
 
-	if(board(dev)->n_chips > 1) {
-		if(output_select == pfi_output_select_counter &&
+	if (board (dev)->n_chips > 1) {
+		if (output_select == pfi_output_select_counter &&
 			pfi_channel >= counter_4_7_first_pfi &&
 			pfi_channel <= counter_4_7_last_pfi) {
 			active_chipset = 1;
@@ -1249,7 +1249,7 @@ static void ni_660x_select_pfi_output(struct comedi_device *dev, unsigned pfi_ch
 		}
 	}
 
-	if(idle_chipset != active_chipset) {
+	if (idle_chipset != active_chipset) {
 		idle_bits = ni_660x_read_register(dev, idle_chipset, IOConfigReg(pfi_channel));
 		idle_bits &= ~pfi_output_select_mask(pfi_channel);
 		idle_bits |= pfi_output_select_bits(pfi_channel, pfi_output_select_high_Z);

drivers/staging/comedi/drivers/ni_atmio16d.c

@@ -417,10 +417,10 @@ static int atmio16d_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s
 	} else if (cmd->convert_arg < 655360000) {
 		base_clock = CLOCK_100_KHZ;
 		timer = cmd->convert_arg / 10000;
-	} else if (cmd->convert_arg <= 0xffffffff /* 6553600000 */ ) {
+	} else if (cmd->convert_arg <= 0xffffffff /* 6553600000 */) {
 		base_clock = CLOCK_10_KHZ;
 		timer = cmd->convert_arg / 100000;
-	} else if (cmd->convert_arg <= 0xffffffff /* 65536000000 */ ) {
+	} else if (cmd->convert_arg <= 0xffffffff /* 65536000000 */) {
 		base_clock = CLOCK_1_KHZ;
 		timer = cmd->convert_arg / 1000000;
 	}
@@ -483,10 +483,10 @@ static int atmio16d_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s
 		} else if (cmd->scan_begin_arg < 655360000) {
 			base_clock = CLOCK_100_KHZ;
 			timer = cmd->scan_begin_arg / 10000;
-		} else if (cmd->scan_begin_arg < 0xffffffff /* 6553600000 */ ) {
+		} else if (cmd->scan_begin_arg < 0xffffffff /* 6553600000 */) {
 			base_clock = CLOCK_10_KHZ;
 			timer = cmd->scan_begin_arg / 100000;
-		} else if (cmd->scan_begin_arg < 0xffffffff /* 65536000000 */ ) {
+		} else if (cmd->scan_begin_arg < 0xffffffff /* 65536000000 */) {
 			base_clock = CLOCK_1_KHZ;
 			timer = cmd->scan_begin_arg / 1000000;
 		}

drivers/staging/comedi/drivers/ni_mio_common.c

@@ -1554,7 +1554,7 @@ static int ni_ai_setup_MITE_dma(struct comedi_device *dev)
 	comedi_buf_write_alloc(s->async, s->async->prealloc_bufsz);
 
 	comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, flags);
-	if(devpriv->ai_mite_chan == NULL)
+	if (devpriv->ai_mite_chan == NULL)
 	{
 		comedi_spin_unlock_irqrestore(&devpriv->mite_channel_lock, flags);
 		return -EIO;
@@ -2810,7 +2810,7 @@ static int ni_m_series_ao_config_chanlist(struct comedi_device *dev,
 	int i;
 	int invert = 0;
 
-	if(timed) {
+	if (timed) {
 		for (i = 0; i < boardtype.n_aochan; ++i) {
 			devpriv->ao_conf[i] &= ~MSeries_AO_Update_Timed_Bit;
 			ni_writeb(devpriv->ao_conf[i], M_Offset_AO_Config_Bank(i));
@@ -2970,11 +2970,11 @@ static int ni_ao_insn_config(struct comedi_device *dev, struct comedi_subdevice
 {
 	switch (data[0]) {
 	case INSN_CONFIG_GET_HARDWARE_BUFFER_SIZE:
-		switch(data[1])
+		switch (data[1])
 		{
 		case COMEDI_OUTPUT:
 			data[2] = 1 + boardtype.ao_fifo_depth * sizeof(short);
-			if(devpriv->mite) data[2] += devpriv->mite->fifo_size;
+			if (devpriv->mite) data[2] += devpriv->mite->fifo_size;
 			break;
 		case COMEDI_INPUT:
 			data[2] = 0;
@@ -3139,7 +3139,7 @@ static int ni_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 	devpriv->stc_writew(dev, devpriv->ao_mode2, AO_Mode_2_Register);
 	switch (cmd->stop_src) {
 	case TRIG_COUNT:
-		if(boardtype.reg_type & ni_reg_m_series_mask)
+		if (boardtype.reg_type & ni_reg_m_series_mask)
 		{
 			/*  this is how the NI example code does it for m-series boards, verified correct with 6259 */
 			devpriv->stc_writel(dev, cmd->stop_arg - 1, AO_UC_Load_A_Register);
@@ -3422,7 +3422,7 @@ static int ni_ao_reset(struct comedi_device *dev, struct comedi_subdevice *s)
 	if (boardtype.reg_type & ni_reg_6xxx_mask) {
 		unsigned immediate_bits = 0;
 		unsigned i;
-		for(i = 0; i < s->n_chan; ++i)
+		for (i = 0; i < s->n_chan; ++i)
 		{
 			immediate_bits |= 1 << i;
 		}

drivers/staging/comedi/drivers/ni_stc.h

@@ -262,7 +262,7 @@ enum Joint_Status_2_Bits {
 #define AO_Trigger_Once				_bit0
 
 #define AO_Mode_2_Register		39
-#define AO_FIFO_Mode_Mask ( 0x3 << 14 )
+#define AO_FIFO_Mode_Mask (0x3 << 14)
 enum AO_FIFO_Mode_Bits {
 	AO_FIFO_Mode_HF_to_F = (3 << 14),
 	AO_FIFO_Mode_F = (2 << 14),

drivers/staging/comedi/drivers/pcmda12.c

@@ -55,7 +55,7 @@ Configuration Options:
 
 #include <linux/pci.h>		/* for PCI devices */
 
-#define MIN(a, b) ( ((a) < (b)) ? (a) : (b) )
+#define MIN(a, b) (((a) < (b)) ? (a) : (b))
 #define SDEV_NO ((int)(s - dev->subdevices))
 #define CHANS 8
 #define IOSIZE 16

drivers/staging/comedi/drivers/pcmmio.c

@@ -76,7 +76,7 @@ Configuration Options:
 #include "../comedidev.h"
 #include <linux/pci.h>		/* for PCI devices */
 
-#define MIN(a, b) ( ((a) < (b)) ? (a) : (b) )
+#define MIN(a, b) (((a) < (b)) ? (a) : (b))
 
 /* This stuff is all from pcmuio.c -- it refers to the DIO subdevices only */
 #define CHANS_PER_PORT   8

drivers/staging/comedi/drivers/pcmuio.c

@@ -79,7 +79,7 @@ Configuration Options:
 
 #include <linux/pci.h>		/* for PCI devices */
 
-#define MIN(a, b) ( ((a) < (b)) ? (a) : (b) )
+#define MIN(a, b) (((a) < (b)) ? (a) : (b))
 #define CHANS_PER_PORT   8
 #define PORTS_PER_ASIC   6
 #define INTR_PORTS_PER_ASIC   3

drivers/staging/comedi/drivers/rtd520.c

@@ -757,15 +757,15 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 				continue;
 			}
 		}
-		for(i = 0; i < sizeof(rtd520Boards) / sizeof(rtd520Boards[0]); ++i)
+		for (i = 0; i < sizeof (rtd520Boards) / sizeof (rtd520Boards[0]); ++i)
 		{
-			if(pcidev->device == rtd520Boards[i].device_id)
+			if (pcidev->device == rtd520Boards[i].device_id)
 			{
 				dev->board_ptr = &rtd520Boards[i];
 				break;
 			}
 		}
-		if(dev->board_ptr) break;	/* found one */
+		if (dev->board_ptr) break;	/* found one */
 	}
 	if (!pcidev) {
 		if (it->options[0] && it->options[1]) {
@@ -931,7 +931,7 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	printk("( irq=%u )", dev->irq);
 
 	ret = rtd520_probe_fifo_depth(dev);
-	if(ret < 0) {
+	if (ret < 0) {
 		return ret;
 	}
 	devpriv->fifoLen = ret;
@@ -1226,18 +1226,18 @@ static int rtd520_probe_fifo_depth(struct comedi_device *dev)
 		RtdAdcStart(dev);
 		comedi_udelay(1);
 		fifo_status = RtdFifoStatus(dev);
-		if((fifo_status & FS_ADC_HEMPTY) == 0) {
+		if ((fifo_status & FS_ADC_HEMPTY) == 0) {
 			fifo_size = 2 * i;
 			break;
 		}
 	}
-	if(i == limit)
+	if (i == limit)
 	{
 		rt_printk("\ncomedi: %s: failed to probe fifo size.\n", DRV_NAME);
 		return -EIO;
 	}
 	RtdAdcClearFifo(dev);
-	if(fifo_size != 0x400 && fifo_size != 0x2000)
+	if (fifo_size != 0x400 && fifo_size != 0x2000)
 	{
 		rt_printk("\ncomedi: %s: unexpected fifo size of %i, expected 1024 or 8192.\n",
 			DRV_NAME, fifo_size);

drivers/staging/comedi/rt_pend_tq.c

@@ -28,8 +28,8 @@ int rt_pend_tq_irq = 0;
 DEFINE_SPINLOCK(rt_pend_tq_lock);
 
 /* WARNING: following code not checked against race conditions yet. */
-#define INC_CIRCULAR_PTR(ptr, begin, size) do {if(++(ptr)>=(begin)+(size)) (ptr)=(begin); } while(0)
-#define DEC_CIRCULAR_PTR(ptr, begin, size) do {if(--(ptr)<(begin)) (ptr)=(begin)+(size)-1; } while(0)
+#define INC_CIRCULAR_PTR (ptr, begin, size) do {if (++ (ptr)>= (begin)+ (size)) (ptr)= (begin); } while (0)
+#define DEC_CIRCULAR_PTR (ptr, begin, size) do {if (-- (ptr)< (begin)) (ptr)= (begin)+ (size)-1; } while (0)
 
 int rt_pend_call(void (*func) (int arg1, void *arg2), int arg1, void *arg2)
 {