Commit 531ef5eb authored by Amelie Delaunay's avatar Amelie Delaunay Committed by Felipe Balbi

usb: dwc2: add support for host mode external vbus supply

This patch adds a way to enable an external vbus supply in host mode,
when dwc2 drvvbus signal is not used.

This patch is very similar to the one done in U-Boot dwc2 driver [1]. It
also adds dynamic vbus supply management depending on the role and state
of the core.

[1] https://lists.denx.de/pipermail/u-boot/2017-March/283434.htmlSigned-off-by: default avatarAmelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: default avatarFelipe Balbi <felipe.balbi@linux.intel.com>
parent 13b1f8e2
...@@ -819,6 +819,7 @@ struct dwc2_hregs_backup { ...@@ -819,6 +819,7 @@ struct dwc2_hregs_backup {
* @plat: The platform specific configuration data. This can be * @plat: The platform specific configuration data. This can be
* removed once all SoCs support usb transceiver. * removed once all SoCs support usb transceiver.
* @supplies: Definition of USB power supplies * @supplies: Definition of USB power supplies
* @vbus_supply: Regulator supplying vbus.
* @phyif: PHY interface width * @phyif: PHY interface width
* @lock: Spinlock that protects all the driver data structures * @lock: Spinlock that protects all the driver data structures
* @priv: Stores a pointer to the struct usb_hcd * @priv: Stores a pointer to the struct usb_hcd
...@@ -958,6 +959,7 @@ struct dwc2_hsotg { ...@@ -958,6 +959,7 @@ struct dwc2_hsotg {
struct usb_phy *uphy; struct usb_phy *uphy;
struct dwc2_hsotg_plat *plat; struct dwc2_hsotg_plat *plat;
struct regulator_bulk_data supplies[DWC2_NUM_SUPPLIES]; struct regulator_bulk_data supplies[DWC2_NUM_SUPPLIES];
struct regulator *vbus_supply;
u32 phyif; u32 phyif;
spinlock_t lock; spinlock_t lock;
......
...@@ -356,6 +356,23 @@ static void dwc2_gusbcfg_init(struct dwc2_hsotg *hsotg) ...@@ -356,6 +356,23 @@ static void dwc2_gusbcfg_init(struct dwc2_hsotg *hsotg)
dwc2_writel(usbcfg, hsotg->regs + GUSBCFG); dwc2_writel(usbcfg, hsotg->regs + GUSBCFG);
} }
static int dwc2_vbus_supply_init(struct dwc2_hsotg *hsotg)
{
hsotg->vbus_supply = devm_regulator_get_optional(hsotg->dev, "vbus");
if (IS_ERR(hsotg->vbus_supply))
return 0;
return regulator_enable(hsotg->vbus_supply);
}
static int dwc2_vbus_supply_exit(struct dwc2_hsotg *hsotg)
{
if (hsotg->vbus_supply)
return regulator_disable(hsotg->vbus_supply);
return 0;
}
/** /**
* dwc2_enable_host_interrupts() - Enables the Host mode interrupts * dwc2_enable_host_interrupts() - Enables the Host mode interrupts
* *
...@@ -3275,6 +3292,7 @@ static void dwc2_conn_id_status_change(struct work_struct *work) ...@@ -3275,6 +3292,7 @@ static void dwc2_conn_id_status_change(struct work_struct *work)
/* B-Device connector (Device Mode) */ /* B-Device connector (Device Mode) */
if (gotgctl & GOTGCTL_CONID_B) { if (gotgctl & GOTGCTL_CONID_B) {
dwc2_vbus_supply_exit(hsotg);
/* Wait for switch to device mode */ /* Wait for switch to device mode */
dev_dbg(hsotg->dev, "connId B\n"); dev_dbg(hsotg->dev, "connId B\n");
if (hsotg->bus_suspended) { if (hsotg->bus_suspended) {
...@@ -4323,6 +4341,9 @@ static int _dwc2_hcd_start(struct usb_hcd *hcd) ...@@ -4323,6 +4341,9 @@ static int _dwc2_hcd_start(struct usb_hcd *hcd)
} }
spin_unlock_irqrestore(&hsotg->lock, flags); spin_unlock_irqrestore(&hsotg->lock, flags);
dwc2_vbus_supply_init(hsotg);
return 0; return 0;
} }
...@@ -4350,6 +4371,8 @@ static void _dwc2_hcd_stop(struct usb_hcd *hcd) ...@@ -4350,6 +4371,8 @@ static void _dwc2_hcd_stop(struct usb_hcd *hcd)
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
spin_unlock_irqrestore(&hsotg->lock, flags); spin_unlock_irqrestore(&hsotg->lock, flags);
dwc2_vbus_supply_exit(hsotg);
usleep_range(1000, 3000); usleep_range(1000, 3000);
} }
...@@ -4386,6 +4409,7 @@ static int _dwc2_hcd_suspend(struct usb_hcd *hcd) ...@@ -4386,6 +4409,7 @@ static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
hprt0 |= HPRT0_SUSP; hprt0 |= HPRT0_SUSP;
hprt0 &= ~HPRT0_PWR; hprt0 &= ~HPRT0_PWR;
dwc2_writel(hprt0, hsotg->regs + HPRT0); dwc2_writel(hprt0, hsotg->regs + HPRT0);
dwc2_vbus_supply_exit(hsotg);
} }
/* Enter partial_power_down */ /* Enter partial_power_down */
...@@ -4466,6 +4490,8 @@ static int _dwc2_hcd_resume(struct usb_hcd *hcd) ...@@ -4466,6 +4490,8 @@ static int _dwc2_hcd_resume(struct usb_hcd *hcd)
spin_unlock_irqrestore(&hsotg->lock, flags); spin_unlock_irqrestore(&hsotg->lock, flags);
dwc2_port_resume(hsotg); dwc2_port_resume(hsotg);
} else { } else {
dwc2_vbus_supply_init(hsotg);
/* Wait for controller to correctly update D+/D- level */ /* Wait for controller to correctly update D+/D- level */
usleep_range(3000, 5000); usleep_range(3000, 5000);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment