Commit 53403866 authored by Soeren Grunewald's avatar Soeren Grunewald Committed by Luis Henriques

serial: 8250_pci: Correct uartclk for xr17v35x expansion chips

commit 899f0c1c upstream.

The internal clock of the master chip, which is usually 125MHz, is only half
(62.5MHz) for the slave chips. So we have to adjust the uartclk for all the
slave ports. Therefor we add a new function to determine if a slave chip is
present and update pci_xr17v35x_setup accordingly.
Signed-off-by: default avatarSoeren Grunewald <soeren.grunewald@desy.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
parent d20a171c
......@@ -1634,6 +1634,9 @@ static int pci_eg20t_init(struct pci_dev *dev)
#endif
}
#define PCI_DEVICE_ID_EXAR_XR17V4358 0x4358
#define PCI_DEVICE_ID_EXAR_XR17V8358 0x8358
static int
pci_xr17c154_setup(struct serial_private *priv,
const struct pciserial_board *board,
......@@ -1643,6 +1646,15 @@ pci_xr17c154_setup(struct serial_private *priv,
return pci_default_setup(priv, board, port, idx);
}
static inline int
xr17v35x_has_slave(struct serial_private *priv)
{
const int dev_id = priv->dev->device;
return ((dev_id == PCI_DEVICE_ID_EXAR_XR17V4358) ||
(dev_id == PCI_DEVICE_ID_EXAR_XR17V8358));
}
static int
pci_xr17v35x_setup(struct serial_private *priv,
const struct pciserial_board *board,
......@@ -1656,6 +1668,13 @@ pci_xr17v35x_setup(struct serial_private *priv,
port->port.flags |= UPF_EXAR_EFR;
/*
* Setup the uart clock for the devices on expansion slot to
* half the clock speed of the main chip (which is 125MHz)
*/
if (xr17v35x_has_slave(priv) && idx >= 8)
port->port.uartclk = (7812500 * 16 / 2);
/*
* Setup Multipurpose Input/Output pins.
*/
......@@ -1802,9 +1821,6 @@ pci_wch_ch353_setup(struct serial_private *priv,
#define PCI_DEVICE_ID_PERICOM_PI7C9X7954 0x7954
#define PCI_DEVICE_ID_PERICOM_PI7C9X7958 0x7958
#define PCI_DEVICE_ID_EXAR_XR17V4358 0x4358
#define PCI_DEVICE_ID_EXAR_XR17V8358 0x8358
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment