Commit 53f37d1d authored by Paul Burton's avatar Paul Burton Committed by Ralf Baechle

MIPS: SEAD3: Use generic ns16550a earlycon support

Stop selecting SYS_HAS_EARLY_PRINTK & remove the custom support for
early output to the ns16550a UARTs, instead relying upon generic
ns16550a earlycon support. This reduces the amount of platform code
required for SEAD3 without losing any functionality.
Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
Cc: Jacek Anaszewski <j.anaszewski@samsung.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14049/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent c11e3b48
......@@ -514,7 +514,6 @@ config MIPS_SEAD3
select SYS_HAS_CPU_MIPS32_R2
select SYS_HAS_CPU_MIPS32_R6
select SYS_HAS_CPU_MIPS64_R1
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
......
......@@ -15,6 +15,8 @@ CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_MODULES=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="earlycon"
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_NET=y
CONFIG_PACKET=y
......
......@@ -17,5 +17,3 @@ obj-y += sead3-platform.o
obj-y += sead3-reset.o
obj-y += sead3-setup.o
obj-y += sead3-time.o
obj-$(CONFIG_EARLY_PRINTK) += sead3-console.o
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
*/
#include <linux/init.h>
#include <linux/console.h>
#include <linux/serial_reg.h>
#include <linux/io.h>
#define SEAD_UART1_REGS_BASE 0xbf000800 /* ttyS1 = DB9 port */
#define SEAD_UART0_REGS_BASE 0xbf000900 /* ttyS0 = USB port */
#define PORT(base_addr, offset) ((unsigned int __iomem *)(base_addr+(offset)*4))
static char console_port = 1;
static inline unsigned int serial_in(int offset, unsigned int base_addr)
{
return __raw_readl(PORT(base_addr, offset)) & 0xff;
}
static inline void serial_out(int offset, int value, unsigned int base_addr)
{
__raw_writel(value, PORT(base_addr, offset));
}
void __init fw_init_early_console(char port)
{
console_port = port;
}
int prom_putchar(char c)
{
unsigned int base_addr;
base_addr = console_port ? SEAD_UART1_REGS_BASE : SEAD_UART0_REGS_BASE;
while ((serial_in(UART_LSR, base_addr) & UART_LSR_THRE) == 0)
;
serial_out(UART_TX, c, base_addr);
return 1;
}
......@@ -93,12 +93,6 @@ void __init prom_init(void)
board_ejtag_handler_setup = mips_ejtag_setup;
fw_init_cmdline();
#ifdef CONFIG_EARLY_PRINTK
if ((strstr(fw_getcmdline(), "console=ttyS0")) != NULL)
fw_init_early_console(0);
else if ((strstr(fw_getcmdline(), "console=ttyS1")) != NULL)
fw_init_early_console(1);
#endif
}
void __init prom_free_prom_memory(void)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment