mmc: omap: clarify DDR timing mode between SD-UHS and eMMC

Replaced UHS_DDR50 with MMC_DDR52.
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>

drivers/mmc/host/omap_hsmmc.c

@@ -582,7 +582,7 @@ static void omap_hsmmc_set_clock(struct omap_hsmmc_host *host)
 	 *	- MMC/SD clock coming out of controller > 25MHz
 	 */
 	if ((mmc_slot(host).features & HSMMC_HAS_HSPE_SUPPORT) &&
-	    (ios->timing != MMC_TIMING_UHS_DDR50) &&
+	    (ios->timing != MMC_TIMING_MMC_DDR52) &&
 	    ((OMAP_HSMMC_READ(host->base, CAPA) & HSS) == HSS)) {
 		regval = OMAP_HSMMC_READ(host->base, HCTL);
 		if (clkdiv && (clk_get_rate(host->fclk)/clkdiv) > 25000000)
@@ -602,7 +602,7 @@ static void omap_hsmmc_set_bus_width(struct omap_hsmmc_host *host)
 	u32 con;
 
 	con = OMAP_HSMMC_READ(host->base, CON);
-	if (ios->timing == MMC_TIMING_UHS_DDR50)
+	if (ios->timing == MMC_TIMING_MMC_DDR52)
 		con |= DDR;	/* configure in DDR mode */
 	else
 		con &= ~DDR;