Commit 5445d626 authored by Mark Brown's avatar Mark Brown

Merge remote-tracking branch 'asoc/topic/rt5645' into asoc-next

parents 208a128f 851b81e8
RT5650/RT5645 audio CODEC
This device supports I2C only.
Required properties:
- compatible : One of "realtek,rt5645" or "realtek,rt5650".
- reg : The I2C address of the device.
- interrupts : The CODEC's interrupt output.
Optional properties:
- hp-detect-gpios:
a GPIO spec for the external headphone detect pin. If jd-mode = 0,
we will get the JD status by getting the value of hp-detect-gpios.
- realtek,in2-differential
Boolean. Indicate MIC2 input are differential, rather than single-ended.
- realtek,dmic1-data-pin
0: dmic1 is not used
1: using IN2P pin as dmic1 data pin
2: using GPIO6 pin as dmic1 data pin
3: using GPIO10 pin as dmic1 data pin
4: using GPIO12 pin as dmic1 data pin
- realtek,dmic2-data-pin
0: dmic2 is not used
1: using IN2N pin as dmic2 data pin
2: using GPIO5 pin as dmic2 data pin
3: using GPIO11 pin as dmic2 data pin
-- realtek,jd-mode : The JD mode of rt5645/rt5650
0 : rt5645/rt5650 JD function is not used
1 : Mode-0 (VDD=3.3V), two port jack detection
2 : Mode-1 (VDD=3.3V), one port jack detection
3 : Mode-2 (VDD=1.8V), one port jack detection
Pins on the device (for linking into audio routes) for RT5645/RT5650:
* DMIC L1
* DMIC R1
* DMIC L2
* DMIC R2
* IN1P
* IN1N
* IN2P
* IN2N
* Haptic Generator
* HPOL
* HPOR
* LOUTL
* LOUTR
* PDM1L
* PDM1R
* SPOL
* SPOR
Example:
codec: rt5650@1a {
compatible = "realtek,rt5650";
reg = <0x1a>;
hp-detect-gpios = <&gpio 19 0>;
interrupt-parent = <&gpio>;
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
realtek,dmic-en = "true";
realtek,en-jd-func = "true";
realtek,jd-mode = <3>;
};
\ No newline at end of file
......@@ -20,9 +20,6 @@ struct rt5645_platform_data {
unsigned int dmic2_data_pin;
/* 0 = IN2P; 1 = GPIO6; 2 = GPIO10; 3 = GPIO12 */
unsigned int hp_det_gpio;
bool gpio_hp_det_active_high;
unsigned int jd_mode;
};
......
......@@ -349,6 +349,7 @@ static bool rt5645_readable_register(struct device *dev, unsigned int reg)
case RT5645_TDM_CTRL_1:
case RT5645_TDM_CTRL_2:
case RT5645_TDM_CTRL_3:
case RT5650_TDM_CTRL_4:
case RT5645_GLB_CLK:
case RT5645_PLL_CTRL1:
case RT5645_PLL_CTRL2:
......@@ -1705,15 +1706,6 @@ static const struct snd_soc_dapm_widget rt5645_dapm_widgets[] = {
SND_SOC_DAPM_MUX("RT5645 IF1 ADC Mux", SND_SOC_NOPM,
0, 0, &rt5645_if1_adc_in_mux),
SND_SOC_DAPM_MUX("RT5650 IF1 ADC1 Swap Mux", SND_SOC_NOPM,
0, 0, &rt5650_if1_adc1_in_mux),
SND_SOC_DAPM_MUX("RT5650 IF1 ADC2 Swap Mux", SND_SOC_NOPM,
0, 0, &rt5650_if1_adc2_in_mux),
SND_SOC_DAPM_MUX("RT5650 IF1 ADC3 Swap Mux", SND_SOC_NOPM,
0, 0, &rt5650_if1_adc3_in_mux),
SND_SOC_DAPM_MUX("RT5650 IF1 ADC Mux", SND_SOC_NOPM,
0, 0, &rt5650_if1_adc_in_mux),
SND_SOC_DAPM_MUX("IF2 ADC Mux", SND_SOC_NOPM,
0, 0, &rt5645_if2_adc_in_mux),
......@@ -1732,14 +1724,6 @@ static const struct snd_soc_dapm_widget rt5645_dapm_widgets[] = {
&rt5645_if1_dac2_tdm_sel_mux),
SND_SOC_DAPM_MUX("RT5645 IF1 DAC2 R Mux", SND_SOC_NOPM, 0, 0,
&rt5645_if1_dac3_tdm_sel_mux),
SND_SOC_DAPM_MUX("RT5650 IF1 DAC1 L Mux", SND_SOC_NOPM, 0, 0,
&rt5650_if1_dac0_tdm_sel_mux),
SND_SOC_DAPM_MUX("RT5650 IF1 DAC1 R Mux", SND_SOC_NOPM, 0, 0,
&rt5650_if1_dac1_tdm_sel_mux),
SND_SOC_DAPM_MUX("RT5650 IF1 DAC2 L Mux", SND_SOC_NOPM, 0, 0,
&rt5650_if1_dac2_tdm_sel_mux),
SND_SOC_DAPM_MUX("RT5650 IF1 DAC2 R Mux", SND_SOC_NOPM, 0, 0,
&rt5650_if1_dac3_tdm_sel_mux),
SND_SOC_DAPM_PGA("IF1 ADC", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("IF1 ADC L", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("IF1 ADC R", SND_SOC_NOPM, 0, 0, NULL, 0),
......@@ -1881,6 +1865,24 @@ static const struct snd_soc_dapm_widget rt5650_specific_dapm_widgets[] = {
0, 0, &rt5650_a_dac2_l_mux),
SND_SOC_DAPM_MUX("A DAC2 R Mux", SND_SOC_NOPM,
0, 0, &rt5650_a_dac2_r_mux),
SND_SOC_DAPM_MUX("RT5650 IF1 ADC1 Swap Mux", SND_SOC_NOPM,
0, 0, &rt5650_if1_adc1_in_mux),
SND_SOC_DAPM_MUX("RT5650 IF1 ADC2 Swap Mux", SND_SOC_NOPM,
0, 0, &rt5650_if1_adc2_in_mux),
SND_SOC_DAPM_MUX("RT5650 IF1 ADC3 Swap Mux", SND_SOC_NOPM,
0, 0, &rt5650_if1_adc3_in_mux),
SND_SOC_DAPM_MUX("RT5650 IF1 ADC Mux", SND_SOC_NOPM,
0, 0, &rt5650_if1_adc_in_mux),
SND_SOC_DAPM_MUX("RT5650 IF1 DAC1 L Mux", SND_SOC_NOPM, 0, 0,
&rt5650_if1_dac0_tdm_sel_mux),
SND_SOC_DAPM_MUX("RT5650 IF1 DAC1 R Mux", SND_SOC_NOPM, 0, 0,
&rt5650_if1_dac1_tdm_sel_mux),
SND_SOC_DAPM_MUX("RT5650 IF1 DAC2 L Mux", SND_SOC_NOPM, 0, 0,
&rt5650_if1_dac2_tdm_sel_mux),
SND_SOC_DAPM_MUX("RT5650 IF1 DAC2 R Mux", SND_SOC_NOPM, 0, 0,
&rt5650_if1_dac3_tdm_sel_mux),
};
static const struct snd_soc_dapm_route rt5645_dapm_routes[] = {
......@@ -2761,6 +2763,7 @@ static void rt5645_enable_push_button_irq(struct snd_soc_codec *codec,
struct rt5645_priv *rt5645 = snd_soc_codec_get_drvdata(codec);
if (enable) {
snd_soc_dapm_mutex_lock(&codec->dapm);
snd_soc_dapm_force_enable_pin_unlocked(&codec->dapm,
"ADC L power");
snd_soc_dapm_force_enable_pin_unlocked(&codec->dapm,
......@@ -2770,6 +2773,8 @@ static void rt5645_enable_push_button_irq(struct snd_soc_codec *codec,
snd_soc_dapm_force_enable_pin_unlocked(&codec->dapm,
"Mic Det Power");
snd_soc_dapm_sync_unlocked(&codec->dapm);
snd_soc_dapm_mutex_unlock(&codec->dapm);
snd_soc_update_bits(codec,
RT5645_INT_IRQ_ST, 0x8, 0x8);
snd_soc_update_bits(codec,
......@@ -2780,6 +2785,8 @@ static void rt5645_enable_push_button_irq(struct snd_soc_codec *codec,
} else {
snd_soc_update_bits(codec, RT5650_4BTN_IL_CMD2, 0x8000, 0x0);
snd_soc_update_bits(codec, RT5645_INT_IRQ_ST, 0x8, 0x0);
snd_soc_dapm_mutex_lock(&codec->dapm);
snd_soc_dapm_disable_pin_unlocked(&codec->dapm,
"ADC L power");
snd_soc_dapm_disable_pin_unlocked(&codec->dapm,
......@@ -2790,6 +2797,7 @@ static void rt5645_enable_push_button_irq(struct snd_soc_codec *codec,
snd_soc_dapm_disable_pin_unlocked(&codec->dapm,
"Mic Det Power");
snd_soc_dapm_sync_unlocked(&codec->dapm);
snd_soc_dapm_mutex_unlock(&codec->dapm);
}
}
......@@ -2937,17 +2945,11 @@ static int rt5645_irq_detection(struct rt5645_priv *rt5645)
switch (rt5645->pdata.jd_mode) {
case 0: /* Not using rt5645 JD */
if (gpio_is_valid(rt5645->pdata.hp_det_gpio)) {
gpio_state = gpio_get_value(rt5645->pdata.hp_det_gpio);
dev_dbg(rt5645->codec->dev, "gpio = %d(%d)\n",
rt5645->pdata.hp_det_gpio, gpio_state);
}
if ((rt5645->pdata.gpio_hp_det_active_high && gpio_state) ||
(!rt5645->pdata.gpio_hp_det_active_high &&
!gpio_state)) {
report = rt5645_jack_detect(rt5645->codec, 1);
} else {
report = rt5645_jack_detect(rt5645->codec, 0);
if (rt5645->gpiod_hp_det) {
gpio_state = gpiod_get_value(rt5645->gpiod_hp_det);
dev_dbg(rt5645->codec->dev, "gpio_state = %d\n",
gpio_state);
report = rt5645_jack_detect(rt5645->codec, gpio_state);
}
snd_soc_jack_report(rt5645->hp_jack,
report, SND_JACK_HEADPHONE);
......@@ -3230,6 +3232,20 @@ static struct dmi_system_id dmi_platform_intel_braswell[] = {
{ }
};
static int rt5645_parse_dt(struct rt5645_priv *rt5645, struct device *dev)
{
rt5645->pdata.in2_diff = device_property_read_bool(dev,
"realtek,in2-differential");
device_property_read_u32(dev,
"realtek,dmic1-data-pin", &rt5645->pdata.dmic1_data_pin);
device_property_read_u32(dev,
"realtek,dmic2-data-pin", &rt5645->pdata.dmic2_data_pin);
device_property_read_u32(dev,
"realtek,jd-mode", &rt5645->pdata.jd_mode);
return 0;
}
static int rt5645_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
......@@ -3237,7 +3253,6 @@ static int rt5645_i2c_probe(struct i2c_client *i2c,
struct rt5645_priv *rt5645;
int ret;
unsigned int val;
struct gpio_desc *gpiod;
rt5645 = devm_kzalloc(&i2c->dev, sizeof(struct rt5645_priv),
GFP_KERNEL);
......@@ -3247,22 +3262,19 @@ static int rt5645_i2c_probe(struct i2c_client *i2c,
rt5645->i2c = i2c;
i2c_set_clientdata(i2c, rt5645);
if (pdata) {
if (pdata)
rt5645->pdata = *pdata;
} else {
if (dmi_check_system(dmi_platform_intel_braswell)) {
rt5645->pdata = *rt5645_pdata;
gpiod = devm_gpiod_get_index(&i2c->dev, "rt5645", 0);
else if (dmi_check_system(dmi_platform_intel_braswell))
rt5645->pdata = *rt5645_pdata;
else
rt5645_parse_dt(rt5645, &i2c->dev);
if (IS_ERR(gpiod) || gpiod_direction_input(gpiod)) {
rt5645->pdata.hp_det_gpio = -1;
dev_err(&i2c->dev, "failed to initialize gpiod\n");
} else {
rt5645->pdata.hp_det_gpio = desc_to_gpio(gpiod);
rt5645->pdata.gpio_hp_det_active_high
= !gpiod_is_active_low(gpiod);
}
}
rt5645->gpiod_hp_det = devm_gpiod_get_optional(&i2c->dev, "hp-detect",
GPIOD_IN);
if (IS_ERR(rt5645->gpiod_hp_det)) {
dev_err(&i2c->dev, "failed to initialize gpiod\n");
return PTR_ERR(rt5645->gpiod_hp_det);
}
rt5645->regmap = devm_regmap_init_i2c(i2c, &rt5645_regmap);
......@@ -3426,16 +3438,6 @@ static int rt5645_i2c_probe(struct i2c_client *i2c,
dev_err(&i2c->dev, "Failed to reguest IRQ: %d\n", ret);
}
if (gpio_is_valid(rt5645->pdata.hp_det_gpio)) {
ret = gpio_request(rt5645->pdata.hp_det_gpio, "rt5645");
if (ret)
dev_err(&i2c->dev, "Fail gpio_request hp_det_gpio\n");
ret = gpio_direction_input(rt5645->pdata.hp_det_gpio);
if (ret)
dev_err(&i2c->dev, "Fail gpio_direction hp_det_gpio\n");
}
return snd_soc_register_codec(&i2c->dev, &soc_codec_dev_rt5645,
rt5645_dai, ARRAY_SIZE(rt5645_dai));
}
......@@ -3449,9 +3451,6 @@ static int rt5645_i2c_remove(struct i2c_client *i2c)
cancel_delayed_work_sync(&rt5645->jack_detect_work);
if (gpio_is_valid(rt5645->pdata.hp_det_gpio))
gpio_free(rt5645->pdata.hp_det_gpio);
snd_soc_unregister_codec(&i2c->dev);
return 0;
......
......@@ -2182,6 +2182,7 @@ struct rt5645_priv {
struct rt5645_platform_data pdata;
struct regmap *regmap;
struct i2c_client *i2c;
struct gpio_desc *gpiod_hp_det;
struct snd_soc_jack *hp_jack;
struct snd_soc_jack *mic_jack;
struct snd_soc_jack *btn_jack;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment