Commit 54e5f854 authored by Greg Ungerer's avatar Greg Ungerer Committed by Christoph Hellwig

[PATCH] move common timer and vector code for m68knommu/ColdFire/5307

This patch moves common ColdFire vector and timer procesing code from
the local per-processor config.c for the 5307 ColdFire sub-architecture.
All ColdFire CPU's have the same timer and basic vector setup, seems
crazy to repeat this code for each of 6 ColdFire CPU varients.
This patch also removes the reset button support, this is now moved to
a proper device driver, where it belongs.
parent f3c7a6c1
...@@ -23,17 +23,19 @@ ...@@ -23,17 +23,19 @@
#include <asm/mcfsim.h> #include <asm/mcfsim.h>
#include <asm/mcfdma.h> #include <asm/mcfdma.h>
#include <asm/delay.h> #include <asm/delay.h>
#if defined(CONFIG_eLIA)
#include <asm/elia.h>
#endif
#include <asm/mcfwdebug.h> #include <asm/mcfwdebug.h>
/***************************************************************************/ /***************************************************************************/
void reset_setupbutton(void); void coldfire_tick(void);
void coldfire_profile_init(void); void coldfire_timer_init(void (*handler)(int, void *, struct pt_regs *));
unsigned long coldfire_timer_offset(void);
void coldfire_trap_init(void);
void coldfire_reset(void);
extern unsigned int mcf_timervector;
extern unsigned int mcf_profilevector;
extern unsigned int mcf_timerlevel;
/***************************************************************************/ /***************************************************************************/
...@@ -47,117 +49,7 @@ unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS] = { ...@@ -47,117 +49,7 @@ unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS] = {
MCF_MBAR + MCFDMA_BASE3, MCF_MBAR + MCFDMA_BASE3,
}; };
unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
/***************************************************************************/
void coldfire_tick(void)
{
volatile unsigned char *timerp;
/* Reset the ColdFire timer */
timerp = (volatile unsigned char *) (MCF_MBAR + MCFTIMER_BASE1);
timerp[MCFTIMER_TER] = MCFTIMER_TER_CAP | MCFTIMER_TER_REF;
}
/***************************************************************************/
void coldfire_timer_init(void (*handler)(int, void *, struct pt_regs *))
{
volatile unsigned short *timerp;
volatile unsigned char *icrp;
/* Set up TIMER 1 as poll clock */
timerp = (volatile unsigned short *) (MCF_MBAR + MCFTIMER_BASE1);
timerp[MCFTIMER_TMR] = MCFTIMER_TMR_DISABLE;
timerp[MCFTIMER_TRR] = (unsigned short) ((MCF_CLK / 16) / HZ);
timerp[MCFTIMER_TMR] = MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE;
icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_TIMER1ICR);
#if defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3) || \
defined(CONFIG_CLEOPATRA)
*icrp = MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3;
request_irq(30, handler, SA_INTERRUPT, "ColdFire Timer", NULL);
#else
*icrp = MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI3;
request_irq(29, handler, SA_INTERRUPT, "ColdFire Timer", NULL);
#endif
#if defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3)
/* This is not really the right place to do this... */
reset_setupbutton();
#endif
#ifdef CONFIG_HIGHPROFILE
coldfire_profile_init();
#endif
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_TIMER1);
}
/***************************************************************************/
#ifdef CONFIG_HIGHPROFILE
/***************************************************************************/
#define PROFILEHZ 1013
/*
* Use the other timer to provide high accuracy profiling info.
*/
void coldfire_profile_tick(int irq, void *dummy, struct pt_regs *regs)
{
volatile unsigned char *timerp;
/* Reset the ColdFire timer2 */
timerp = (volatile unsigned char *) (MCF_MBAR + MCFTIMER_BASE2);
timerp[MCFTIMER_TER] = MCFTIMER_TER_CAP | MCFTIMER_TER_REF;
if (!user_mode(regs)) {
if (prof_buffer && current->pid) {
extern int _stext;
unsigned long ip = instruction_pointer(regs);
ip -= (unsigned long) &_stext;
ip >>= prof_shift;
if (ip < prof_len)
prof_buffer[ip]++;
}
}
}
void coldfire_profile_init(void)
{
volatile unsigned short *timerp;
volatile unsigned char *icrp;
printk("PROFILE: lodging timer2=%d as profile timer\n", PROFILEHZ);
/* Set up TIMER 2 as poll clock */
timerp = (volatile unsigned short *) (MCF_MBAR + MCFTIMER_BASE2);
timerp[MCFTIMER_TMR] = MCFTIMER_TMR_DISABLE;
timerp[MCFTIMER_TRR] = (unsigned short) ((MCF_CLK / 16) / PROFILEHZ);
timerp[MCFTIMER_TMR] = MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE;
icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_TIMER2ICR);
*icrp = MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3;
request_irq(31, coldfire_profile_tick, (SA_INTERRUPT | IRQ_FLG_FAST),
"Profile Timer", NULL);
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_TIMER2);
}
/***************************************************************************/ /***************************************************************************/
#endif /* CONFIG_HIGHPROFILE */
/***************************************************************************/
/*
* Program the vector to be an auto-vectored.
*/
void mcf_autovector(unsigned int vec) void mcf_autovector(unsigned int vec)
{ {
...@@ -173,165 +65,57 @@ void mcf_autovector(unsigned int vec) ...@@ -173,165 +65,57 @@ void mcf_autovector(unsigned int vec)
/***************************************************************************/ /***************************************************************************/
extern e_vector *_ramvec; void mcf_settimericr(unsigned int timer, unsigned int level)
void set_evector(int vecnum, void (*handler)(void))
{
if (vecnum >= 0 && vecnum <= 255)
_ramvec[vecnum] = handler;
}
/***************************************************************************/
/* assembler routines */
asmlinkage void buserr(void);
asmlinkage void trap(void);
asmlinkage void system_call(void);
asmlinkage void inthandler(void);
#ifdef TRAP_DBG_INTERRUPT
asmlinkage void dbginterrupt(void);
#endif
void __init coldfire_trap_init(void)
{
int i;
#ifndef ENABLE_dBUG
mcf_setimr(MCFSIM_IMR_MASKALL);
#endif
/*
* There is a common trap handler and common interrupt
* handler that handle almost every vector. We treat
* the system call and bus error special, they get their
* own first level handlers.
*/
#ifndef ENABLE_dBUG
for (i = 3; (i <= 23); i++)
_ramvec[i] = trap;
for (i = 33; (i <= 63); i++)
_ramvec[i] = trap;
#endif
#ifdef TRAP_DBG_INTERRUPT
_ramvec[12] = dbginterrupt;
#endif
for (i = 24; (i <= 30); i++)
_ramvec[i] = inthandler;
#ifndef ENABLE_dBUG
_ramvec[31] = inthandler; // Disables the IRQ7 button
#endif
for (i = 64; (i < 255); i++)
_ramvec[i] = inthandler;
_ramvec[255] = 0;
_ramvec[2] = buserr;
_ramvec[32] = system_call;
#ifdef MCF_BDM_DISABLE
/* Disable the BDM clocking. This also turns off most of the rest of
* the BDM device. This is good for EMC reasons. This option is not
* incompatible with the memory protection option.
*/
wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
#endif
}
/***************************************************************************/
#if defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3)
/*
* Routines to support the NETtel software reset button.
*/
void reset_button(int irq, void *dev_id, struct pt_regs *regs)
{ {
extern void flash_eraseconfig(void); volatile unsigned char *icrp;
static int inbutton = 0; unsigned int icr, imr;
/* if (timer <= 2) {
* IRQ7 is not maskable by the CPU core. It is possible switch (timer) {
* that switch bounce mey get us back here before we have case 2: icr = MCFSIM_TIMER2ICR; imr = MCFSIM_IMR_TIMER2; break;
* really serviced the interrupt. default: icr = MCFSIM_TIMER1ICR; imr = MCFSIM_IMR_TIMER1; break;
*/ }
if (inbutton)
return; icrp = (volatile unsigned char *) (MCF_MBAR + icr);
inbutton = 1; *icrp = MCFSIM_ICR_AUTOVEC | (level << 2) | MCFSIM_ICR_PRI3;
/* Disable interrupt at SIM - best we can do... */ mcf_setimr(mcf_getimr() & ~imr);
mcf_setimr(mcf_getimr() | MCFSIM_IMR_EINT7);
/* Try and de-bounce the switch a little... */
udelay(10000);
flash_eraseconfig();
/* Don't leave here 'till button is no longer pushed! */
for (;;) {
if ((mcf_getipr() & MCFSIM_IMR_EINT7) == 0)
break;
} }
HARD_RESET_NOW();
/* Should never get here... */
inbutton = 0;
/* Interrupt service done, enable it again */
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT7);
}
/***************************************************************************/
void reset_setupbutton(void)
{
volatile unsigned char *mbar;
mbar = (volatile unsigned char *) MCF_MBAR;
*(mbar + MCFSIM_AVR) |= MCFSIM_IMR_EINT7;
mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT7);
request_irq(31, reset_button, (SA_INTERRUPT | IRQ_FLG_FAST),
"Reset Button", NULL);
}
#endif /* CONFIG_NETtel || CONFIG_eLIA || CONFIG_DISKtel || CONFIG_SECUREEDGEMP3 */
/***************************************************************************/
void coldfire_reset(void)
{
HARD_RESET_NOW();
} }
/***************************************************************************/ /***************************************************************************/
void config_BSP(char *commandp, int size) void config_BSP(char *commandp, int size)
{ {
mcf_setimr(MCFSIM_IMR_MASKALL);
#if defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \ #if defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3) defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3) || \
defined(CONFIG_CLEOPATRA)
/* Copy command line from FLASH to local buffer... */ /* Copy command line from FLASH to local buffer... */
memcpy(commandp, (char *) 0xf0004000, size); memcpy(commandp, (char *) 0xf0004000, size);
commandp[size-1] = 0; commandp[size-1] = 0;
/* Different timer setup - to prevent device clash */
mcf_timervector = 30;
mcf_profilevector = 31;
mcf_timerlevel = 6;
#else #else
memset(commandp, 0, size); memset(commandp, 0, size);
#endif /* CONFIG_NETtel || CONFIG_eLIA || CONFIG_DISKtel || CONFIG_SECUREEDGEMP3 */ #endif
mach_sched_init = coldfire_timer_init; mach_sched_init = coldfire_timer_init;
mach_tick = coldfire_tick; mach_tick = coldfire_tick;
mach_gettimeoffset = coldfire_timer_offset;
mach_trap_init = coldfire_trap_init; mach_trap_init = coldfire_trap_init;
mach_reset = coldfire_reset; mach_reset = coldfire_reset;
}
/***************************************************************************/
#ifdef TRAP_DBG_INTERRUPT
asmlinkage void dbginterrupt_c(struct frame *fp) #ifdef MCF_BDM_DISABLE
{ /*
extern void dump(struct pt_regs *fp); * Disable the BDM clocking. This also turns off most of the rest of
printk("%s(%d): BUS ERROR TRAP\n", __FILE__, __LINE__); * the BDM device. This is good for EMC reasons. This option is not
dump((struct pt_regs *) fp); * incompatible with the memory protection option.
asm("halt"); */
wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
#endif
} }
#endif
/***************************************************************************/ /***************************************************************************/
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment