Merge branch 'clk-next' into v3.19-rc7

Documentation/clk.txt

@@ -73,6 +73,8 @@ the operations defined in clk.h:
 						unsigned long *parent_rate);
 		long		(*determine_rate)(struct clk_hw *hw,
 						unsigned long rate,
+						unsigned long min_rate,
+						unsigned long max_rate,
 						unsigned long *best_parent_rate,
 						struct clk_hw **best_parent_clk);
 		int		(*set_parent)(struct clk_hw *hw, u8 index);

Documentation/devicetree/bindings/clock/exynos7-clock.txt

@@ -34,6 +34,8 @@ Required Properties for Clock Controller:
 	- "samsung,exynos7-clock-peris"
 	- "samsung,exynos7-clock-fsys0"
 	- "samsung,exynos7-clock-fsys1"
+	- "samsung,exynos7-clock-mscl"
+	- "samsung,exynos7-clock-aud"
 
  - reg: physical base address of the controller and the length of
 	memory mapped region.
@@ -53,6 +55,7 @@ Input clocks for top0 clock controller:
 	- dout_sclk_bus1_pll
 	- dout_sclk_cc_pll
 	- dout_sclk_mfc_pll
+	- dout_sclk_aud_pll
 
 Input clocks for top1 clock controller:
 	- fin_pll
@@ -76,6 +79,14 @@ Input clocks for peric1 clock controller:
 	- sclk_uart1
 	- sclk_uart2
 	- sclk_uart3
+	- sclk_spi0
+	- sclk_spi1
+	- sclk_spi2
+	- sclk_spi3
+	- sclk_spi4
+	- sclk_i2s1
+	- sclk_pcm1
+	- sclk_spdif
 
 Input clocks for peris clock controller:
 	- fin_pll
@@ -91,3 +102,7 @@ Input clocks for fsys1 clock controller:
 	- dout_aclk_fsys1_200
 	- dout_sclk_mmc0
 	- dout_sclk_mmc1
+
+Input clocks for aud clock controller:
+	- fin_pll
+	- fout_aud_pll

Documentation/devicetree/bindings/clock/qcom,lcc.txt

+Qualcomm LPASS Clock & Reset Controller Binding
+------------------------------------------------
+
+Required properties :
+- compatible : shall contain only one of the following:
+
+			"qcom,lcc-msm8960"
+			"qcom,lcc-apq8064"
+			"qcom,lcc-ipq8064"
+
+- reg : shall contain base register location and length
+- #clock-cells : shall contain 1
+- #reset-cells : shall contain 1
+
+Example:
+	clock-controller@28000000 {
+		compatible = "qcom,lcc-ipq8064";
+		reg = <0x28000000 0x1000>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};

Documentation/devicetree/bindings/clock/qoriq-clock.txt

-* Clock Block on Freescale CoreNet Platforms
+* Clock Block on Freescale QorIQ Platforms
 
-Freescale CoreNet chips take primary clocking input from the external
+Freescale qoriq chips take primary clocking input from the external
 SYSCLK signal. The SYSCLK input (frequency) is multiplied using
 multiple phase locked loops (PLL) to create a variety of frequencies
 which can then be passed to a variety of internal logic, including
@@ -29,6 +29,7 @@ Required properties:
 	* "fsl,t4240-clockgen"
 	* "fsl,b4420-clockgen"
 	* "fsl,b4860-clockgen"
+	* "fsl,ls1021a-clockgen"
 	Chassis clock strings include:
 	* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
 	* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks

Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt

@@ -11,6 +11,7 @@ Required Properties:
 
   - compatible: Must be one of the following
     - "renesas,r7s72100-mstp-clocks" for R7S72100 (RZ) MSTP gate clocks
+    - "renesas,r8a73a4-mstp-clocks" for R8A73A4 (R-Mobile APE6) MSTP gate clocks
     - "renesas,r8a7740-mstp-clocks" for R8A7740 (R-Mobile A1) MSTP gate clocks
     - "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks
     - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks

Documentation/devicetree/bindings/clock/renesas,r8a73a4-cpg-clocks.txt

+* Renesas R8A73A4 Clock Pulse Generator (CPG)
+
+The CPG generates core clocks for the R8A73A4 SoC. It includes five PLLs
+and several fixed ratio dividers.
+
+Required Properties:
+
+  - compatible: Must be "renesas,r8a73a4-cpg-clocks"
+
+  - reg: Base address and length of the memory resource used by the CPG
+
+  - clocks: Reference to the parent clocks ("extal1" and "extal2")
+
+  - #clock-cells: Must be 1
+
+  - clock-output-names: The names of the clocks. Supported clocks are "main",
+    "pll0", "pll1", "pll2", "pll2s", "pll2h", "z", "z2", "i", "m3", "b",
+    "m1", "m2", "zx", "zs", and "hp".
+
+
+Example
+-------
+
+        cpg_clocks: cpg_clocks@e6150000 {
+                compatible = "renesas,r8a73a4-cpg-clocks";
+                reg = <0 0xe6150000 0 0x10000>;
+                clocks = <&extal1_clk>, <&extal2_clk>;
+                #clock-cells = <1>;
+                clock-output-names = "main", "pll0", "pll1", "pll2",
+                                     "pll2s", "pll2h", "z", "z2",
+                                     "i", "m3", "b", "m1", "m2",
+                                     "zx", "zs", "hp";
+        };

Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt

@@ -8,15 +8,18 @@ Required Properties:
   - compatible: Must be one of
     - "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG
     - "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG
+    - "renesas,r8a7793-cpg-clocks" for the r8a7793 CPG
     - "renesas,r8a7794-cpg-clocks" for the r8a7794 CPG
     - "renesas,rcar-gen2-cpg-clocks" for the generic R-Car Gen2 CPG
 
   - reg: Base address and length of the memory resource used by the CPG
 
-  - clocks: Reference to the parent clock
+  - clocks: References to the parent clocks: first to the EXTAL clock, second
+    to the USB_EXTAL clock
   - #clock-cells: Must be 1
   - clock-output-names: The names of the clocks. Supported clocks are "main",
-    "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1" and "z"
+    "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", "rcan", and
+    "adsp"
 
 
 Example
@@ -26,8 +29,9 @@ Example
 		compatible = "renesas,r8a7790-cpg-clocks",
 			     "renesas,rcar-gen2-cpg-clocks";
 		reg = <0 0xe6150000 0 0x1000>;
-		clocks = <&extal_clk>;
+		clocks = <&extal_clk &usb_extal_clk>;
 		#clock-cells = <1>;
 		clock-output-names = "main", "pll0, "pll1", "pll3",
-				     "lb", "qspi", "sdh", "sd0", "sd1", "z";
+				     "lb", "qspi", "sdh", "sd0", "sd1", "z",
+				     "rcan", "adsp";
 	};

Documentation/devicetree/bindings/clock/sunxi.txt

@@ -26,7 +26,7 @@ Required properties:
 	"allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
 	"allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
 	"allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31
-	"allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
+	"allwinner,sun6i-a31-ahb1-clk" - for the AHB1 clock on A31
 	"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
 	"allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23
 	"allwinner,sun9i-a80-ahb0-gates-clk" - for the AHB0 gates on A80
@@ -55,9 +55,11 @@ Required properties:
 	"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
 	"allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
 	"allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13
-	"allwinner,sun4i-a10-mmc-output-clk" - for the MMC output clock on A10
-	"allwinner,sun4i-a10-mmc-sample-clk" - for the MMC sample clock on A10
+	"allwinner,sun4i-a10-mmc-clk" - for the MMC clock
+	"allwinner,sun9i-a80-mmc-clk" - for mmc module clocks on A80
+	"allwinner,sun9i-a80-mmc-config-clk" - for mmc gates + resets on A80
 	"allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks
+	"allwinner,sun9i-a80-mod0-clk" - for module 0 (storage) clocks on A80
 	"allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23
 	"allwinner,sun7i-a20-out-clk" - for the external output clocks
 	"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
@@ -73,7 +75,9 @@ Required properties for all clocks:
 - #clock-cells : from common clock binding; shall be set to 0 except for
 	the following compatibles where it shall be set to 1:
 	"allwinner,*-gates-clk", "allwinner,sun4i-pll5-clk",
-	"allwinner,sun4i-pll6-clk", "allwinner,sun6i-a31-pll6-clk"
+	"allwinner,sun4i-pll6-clk", "allwinner,sun6i-a31-pll6-clk",
+	"allwinner,*-usb-clk", "allwinner,*-mmc-clk",
+	"allwinner,*-mmc-config-clk"
 - clock-output-names : shall be the corresponding names of the outputs.
 	If the clock module only has one output, the name shall be the
 	module name.
@@ -81,6 +85,10 @@ Required properties for all clocks:
 And "allwinner,*-usb-clk" clocks also require:
 - reset-cells : shall be set to 1
 
+The "allwinner,sun9i-a80-mmc-config-clk" clock also requires:
+- #reset-cells : shall be set to 1
+- resets : shall be the reset control phandle for the mmc block.
+
 For "allwinner,sun7i-a20-gmac-clk", the parent clocks shall be fixed rate
 dummy clocks at 25 MHz and 125 MHz, respectively. See example.
 
@@ -95,6 +103,14 @@ For "allwinner,sun6i-a31-pll6-clk", there are 2 outputs. The first output
 is the normal PLL6 output, or "pll6". The second output is rate doubled
 PLL6, or "pll6x2".
 
+The "allwinner,*-mmc-clk" clocks have three different outputs: the
+main clock, with the ID 0, and the output and sample clocks, with the
+IDs 1 and 2, respectively.
+
+The "allwinner,sun9i-a80-mmc-config-clk" clock has one clock/reset output
+per mmc controller. The number of outputs is determined by the size of
+the address block, which is related to the overall mmc block.
+
 For example:
 
 osc24M: clk@01c20050 {
@@ -138,11 +154,11 @@ cpu: cpu@01c20054 {
 };
 
 mmc0_clk: clk@01c20088 {
-	#clock-cells = <0>;
-	compatible = "allwinner,sun4i-mod0-clk";
+	#clock-cells = <1>;
+	compatible = "allwinner,sun4i-a10-mmc-clk";
 	reg = <0x01c20088 0x4>;
 	clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-	clock-output-names = "mmc0";
+	clock-output-names = "mmc0", "mmc0_output", "mmc0_sample";
 };
 
 mii_phy_tx_clk: clk@2 {
@@ -170,3 +186,16 @@ gmac_clk: clk@01c20164 {
 	clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
 	clock-output-names = "gmac";
 };
+
+mmc_config_clk: clk@01c13000 {
+	compatible = "allwinner,sun9i-a80-mmc-config-clk";
+	reg = <0x01c13000 0x10>;
+	clocks = <&ahb0_gates 8>;
+	clock-names = "ahb";
+	resets = <&ahb0_resets 8>;
+	reset-names = "ahb";
+	#clock-cells = <1>;
+	#reset-cells = <1>;
+	clock-output-names = "mmc0_config", "mmc1_config",
+			     "mmc2_config", "mmc3_config";
+};

Documentation/devicetree/bindings/clock/ti,cdce706.txt

+Bindings for Texas Instruments CDCE706 programmable 3-PLL clock
+synthesizer/multiplier/divider.
+
+Reference: http://www.ti.com/lit/ds/symlink/cdce706.pdf
+
+I2C device node required properties:
+- compatible: shall be "ti,cdce706".
+- reg: i2c device address, shall be in range [0x68...0x6b].
+- #clock-cells: from common clock binding; shall be set to 1.
+- clocks: from common clock binding; list of parent clock
+  handles, shall be reference clock(s) connected to CLK_IN0
+  and CLK_IN1 pins.
+- clock-names: shall be clk_in0 and/or clk_in1. Use clk_in0
+  in case of crystal oscillator or differential signal input
+  configuration. Use clk_in0 and clk_in1 in case of independent
+  single-ended LVCMOS inputs configuration.
+
+Example:
+
+	clocks {
+		clk54: clk54 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <54000000>;
+		};
+	};
+	...
+	i2c0: i2c-master@0d090000 {
+		...
+		cdce706: clock-synth@69 {
+			compatible = "ti,cdce706";
+			#clock-cells = <1>;
+			reg = <0x69>;
+			clocks = <&clk54>;
+			clock-names = "clk_in0";
+		};
+	};
+	...
+	simple-audio-card,codec {
+		...
+		clocks = <&cdce706 4>;
+	};

Documentation/devicetree/bindings/clock/ti/fapll.txt

+Binding for Texas Instruments FAPLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a
+register-mapped FAPLL with usually two selectable input clocks
+(reference clock and bypass clock), and one or more child
+syntesizers.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,dm816-fapll-clock"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks (clk-ref and clk-bypass)
+- reg : address and length of the register set for controlling the FAPLL.
+
+Examples:
+	main_fapll: main_fapll {
+		#clock-cells = <1>;
+		compatible = "ti,dm816-fapll-clock";
+		reg = <0x400 0x40>;
+		clocks = <&sys_clkin_ck &sys_clkin_ck>;
+		clock-indices = <1>, <2>, <3>, <4>, <5>,
+				<6>, <7>;
+		clock-output-names = "main_pll_clk1",
+				     "main_pll_clk2",
+				     "main_pll_clk3",
+				     "main_pll_clk4",
+				     "main_pll_clk5",
+				     "main_pll_clk6",
+				     "main_pll_clk7";
+	};

Documentation/devicetree/bindings/mmc/sunxi-mmc.txt

@@ -10,8 +10,8 @@ Absolute maximum transfer rate is 200MB/s
 Required properties:
  - compatible : "allwinner,sun4i-a10-mmc" or "allwinner,sun5i-a13-mmc"
  - reg : mmc controller base registers
- - clocks : a list with 2 phandle + clock specifier pairs
- - clock-names : must contain "ahb" and "mmc"
+ - clocks : a list with 4 phandle + clock specifier pairs
+ - clock-names : must contain "ahb", "mmc", "output" and "sample"
  - interrupts : mmc controller interrupt
 
 Optional properties:
@@ -25,8 +25,8 @@ Examples:
 	mmc0: mmc@01c0f000 {
 		compatible = "allwinner,sun5i-a13-mmc";
 		reg = <0x01c0f000 0x1000>;
-		clocks = <&ahb_gates 8>, <&mmc0_clk>;
-		clock-names = "ahb", "mod";
+		clocks = <&ahb_gates 8>, <&mmc0_clk>, <&mmc0_output_clk>, <&mmc0_sample_clk>;
+		clock-names = "ahb", "mod", "output", "sample";
 		interrupts = <0 32 4>;
 		status = "disabled";
 	};

MAINTAINERS

@@ -9566,6 +9566,11 @@ L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	drivers/thermal/ti-soc-thermal/
 
+TI CDCE706 CLOCK DRIVER
+M:	Max Filippov <jcmvbkbc@gmail.com>
+S:	Maintained
+F:	drivers/clk/clk-cdce706.c
+
 TI CLOCK DRIVER
 M:	Tero Kristo <t-kristo@ti.com>
 L:	linux-omap@vger.kernel.org

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -226,35 +226,43 @@ ms_clk: clk@01c20084 {
 		};
 
 		mmc0_clk: clk@01c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20088 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc0";
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
 		};
 
 		mmc1_clk: clk@01c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c2008c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc1";
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
 		};
 
 		mmc2_clk: clk@01c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20090 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc2";
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
 		};
 
 		mmc3_clk: clk@01c20094 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20094 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc3";
+			clock-output-names = "mmc3",
+					     "mmc3_output",
+					     "mmc3_sample";
 		};
 
 		ts_clk: clk@01c20098 {
@@ -398,8 +406,14 @@ mdio@01c0b080 {
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun4i-a10-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb_gates 8>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <32>;
 			status = "disabled";
 		};
@@ -407,8 +421,14 @@ mmc0: mmc@01c0f000 {
 		mmc1: mmc@01c10000 {
 			compatible = "allwinner,sun4i-a10-mmc";
 			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb_gates 9>, <&mmc1_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <33>;
 			status = "disabled";
 		};
@@ -416,8 +436,14 @@ mmc1: mmc@01c10000 {
 		mmc2: mmc@01c11000 {
 			compatible = "allwinner,sun4i-a10-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb_gates 10>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <34>;
 			status = "disabled";
 		};
@@ -425,8 +451,14 @@ mmc2: mmc@01c11000 {
 		mmc3: mmc@01c12000 {
 			compatible = "allwinner,sun4i-a10-mmc";
 			reg = <0x01c12000 0x1000>;
-			clocks = <&ahb_gates 11>, <&mmc3_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 11>,
+				 <&mmc3_clk 0>,
+				 <&mmc3_clk 1>,
+				 <&mmc3_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <35>;
 			status = "disabled";
 		};

arch/arm/boot/dts/sun5i-a10s.dtsi

@@ -207,27 +207,33 @@ ms_clk: clk@01c20084 {
 		};
 
 		mmc0_clk: clk@01c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20088 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc0";
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
 		};
 
 		mmc1_clk: clk@01c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c2008c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc1";
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
 		};
 
 		mmc2_clk: clk@01c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20090 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc2";
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
 		};
 
 		ts_clk: clk@01c20098 {
@@ -355,8 +361,14 @@ mdio@01c0b080 {
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb_gates 8>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <32>;
 			status = "disabled";
 		};
@@ -364,8 +376,14 @@ mmc0: mmc@01c0f000 {
 		mmc1: mmc@01c10000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb_gates 9>, <&mmc1_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <33>;
 			status = "disabled";
 		};
@@ -373,8 +391,14 @@ mmc1: mmc@01c10000 {
 		mmc2: mmc@01c11000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb_gates 10>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <34>;
 			status = "disabled";
 		};

arch/arm/boot/dts/sun5i-a13.dtsi

@@ -190,27 +190,33 @@ ms_clk: clk@01c20084 {
 		};
 
 		mmc0_clk: clk@01c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20088 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc0";
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
 		};
 
 		mmc1_clk: clk@01c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c2008c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc1";
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
 		};
 
 		mmc2_clk: clk@01c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20090 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc2";
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
 		};
 
 		ts_clk: clk@01c20098 {
@@ -322,8 +328,14 @@ spi1: spi@01c06000 {
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb_gates 8>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <32>;
 			status = "disabled";
 		};
@@ -331,8 +343,14 @@ mmc0: mmc@01c0f000 {
 		mmc2: mmc@01c11000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb_gates 10>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <34>;
 			status = "disabled";
 		};

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -168,19 +168,11 @@ axi: axi@01c20050 {
 			clock-output-names = "axi";
 		};
 
-		ahb1_mux: ahb1_mux@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-ahb1-mux-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
-			clock-output-names = "ahb1_mux";
-		};
-
 		ahb1: ahb1@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ahb-clk";
+			compatible = "allwinner,sun6i-a31-ahb1-clk";
 			reg = <0x01c20054 0x4>;
-			clocks = <&ahb1_mux>;
+			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
 			clock-output-names = "ahb1";
 		};
 
@@ -243,35 +235,43 @@ apb2_gates: clk@01c2006c {
 		};
 
 		mmc0_clk: clk@01c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20088 0x4>;
 			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc0";
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
 		};
 
 		mmc1_clk: clk@01c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c2008c 0x4>;
 			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc1";
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
 		};
 
 		mmc2_clk: clk@01c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20090 0x4>;
 			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc2";
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
 		};
 
 		mmc3_clk: clk@01c20094 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20094 0x4>;
 			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc3";
+			clock-output-names = "mmc3",
+					     "mmc3_output",
+					     "mmc3_sample";
 		};
 
 		spi0_clk: clk@01c200a0 {
@@ -361,15 +361,21 @@ dma: dma-controller@01c02000 {
 			#dma-cells = <1>;
 
 			/* DMA controller requires AHB1 clocked from PLL6 */
-			assigned-clocks = <&ahb1_mux>;
+			assigned-clocks = <&ahb1>;
 			assigned-clock-parents = <&pll6 0>;
 		};
 
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb1_gates 8>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb1_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			resets = <&ahb1_rst 8>;
 			reset-names = "ahb";
 			interrupts = <0 60 4>;
@@ -379,8 +385,14 @@ mmc0: mmc@01c0f000 {
 		mmc1: mmc@01c10000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb1_gates 9>, <&mmc1_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb1_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			resets = <&ahb1_rst 9>;
 			reset-names = "ahb";
 			interrupts = <0 61 4>;
@@ -390,8 +402,14 @@ mmc1: mmc@01c10000 {
 		mmc2: mmc@01c11000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb1_gates 10>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb1_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			resets = <&ahb1_rst 10>;
 			reset-names = "ahb";
 			interrupts = <0 62 4>;
@@ -401,8 +419,14 @@ mmc2: mmc@01c11000 {
 		mmc3: mmc@01c12000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c12000 0x1000>;
-			clocks = <&ahb1_gates 11>, <&mmc3_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb1_gates 11>,
+				 <&mmc3_clk 0>,
+				 <&mmc3_clk 1>,
+				 <&mmc3_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			resets = <&ahb1_rst 11>;
 			reset-names = "ahb";
 			interrupts = <0 63 4>;

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -266,35 +266,43 @@ ms_clk: clk@01c20084 {
 		};
 
 		mmc0_clk: clk@01c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20088 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc0";
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
 		};
 
 		mmc1_clk: clk@01c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c2008c 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc1";
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
 		};
 
 		mmc2_clk: clk@01c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20090 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc2";
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
 		};
 
 		mmc3_clk: clk@01c20094 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20094 0x4>;
 			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc3";
+			clock-output-names = "mmc3",
+					     "mmc3_output",
+					     "mmc3_sample";
 		};
 
 		ts_clk: clk@01c20098 {
@@ -510,8 +518,14 @@ mdio@01c0b080 {
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb_gates 8>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <0 32 4>;
 			status = "disabled";
 		};
@@ -519,8 +533,14 @@ mmc0: mmc@01c0f000 {
 		mmc1: mmc@01c10000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb_gates 9>, <&mmc1_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <0 33 4>;
 			status = "disabled";
 		};
@@ -528,8 +548,14 @@ mmc1: mmc@01c10000 {
 		mmc2: mmc@01c11000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb_gates 10>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <0 34 4>;
 			status = "disabled";
 		};
@@ -537,8 +563,14 @@ mmc2: mmc@01c11000 {
 		mmc3: mmc@01c12000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c12000 0x1000>;
-			clocks = <&ahb_gates 11>, <&mmc3_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb_gates 11>,
+				 <&mmc3_clk 0>,
+				 <&mmc3_clk 1>,
+				 <&mmc3_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			interrupts = <0 35 4>;
 			status = "disabled";
 		};

arch/arm/boot/dts/sun8i-a23.dtsi

@@ -101,11 +101,19 @@ pll1: clk@01c20000 {
 		};
 
 		/* dummy clock until actually implemented */
-		pll6: pll6_clk {
+		pll5: pll5_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <600000000>;
-			clock-output-names = "pll6";
+			clock-frequency = <0>;
+			clock-output-names = "pll5";
+		};
+
+		pll6: clk@01c20028 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6", "pll6x2";
 		};
 
 		cpu: cpu_clk@01c20050 {
@@ -131,19 +139,11 @@ axi: axi_clk@01c20050 {
 			clock-output-names = "axi";
 		};
 
-		ahb1_mux: ahb1_mux_clk@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-ahb1-mux-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>;
-			clock-output-names = "ahb1_mux";
-		};
-
 		ahb1: ahb1_clk@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ahb-clk";
+			compatible = "allwinner,sun6i-a31-ahb1-clk";
 			reg = <0x01c20054 0x4>;
-			clocks = <&ahb1_mux>;
+			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
 			clock-output-names = "ahb1";
 		};
 
@@ -184,7 +184,7 @@ apb2: clk@01c20058 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-a10-apb1-clk";
 			reg = <0x01c20058 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
+			clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
 			clock-output-names = "apb2";
 		};
 
@@ -200,27 +200,41 @@ apb2_gates: clk@01c2006c {
 		};
 
 		mmc0_clk: clk@01c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6>;
-			clock-output-names = "mmc0";
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
 		};
 
 		mmc1_clk: clk@01c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6>;
-			clock-output-names = "mmc1";
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
 		};
 
 		mmc2_clk: clk@01c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6>;
-			clock-output-names = "mmc2";
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
+		};
+
+		mbus_clk: clk@01c2015c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-a23-mbus-clk";
+			reg = <0x01c2015c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5>;
+			clock-output-names = "mbus";
 		};
 	};
 
@@ -242,8 +256,14 @@ dma: dma-controller@01c02000 {
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb1_gates 8>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb1_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			resets = <&ahb1_rst 8>;
 			reset-names = "ahb";
 			interrupts = <0 60 4>;
@@ -253,8 +273,14 @@ mmc0: mmc@01c0f000 {
 		mmc1: mmc@01c10000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb1_gates 9>, <&mmc1_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb1_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			resets = <&ahb1_rst 9>;
 			reset-names = "ahb";
 			interrupts = <0 61 4>;
@@ -264,8 +290,14 @@ mmc1: mmc@01c10000 {
 		mmc2: mmc@01c11000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb1_gates 10>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc";
+			clocks = <&ahb1_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
 			resets = <&ahb1_rst 10>;
 			reset-names = "ahb";
 			interrupts = <0 62 4>;

arch/arm/mach-omap2/Makefile

@@ -187,7 +187,7 @@ obj-$(CONFIG_SOC_OMAP2430)		+= clock2430.o
 obj-$(CONFIG_ARCH_OMAP3)		+= $(clock-common) clock3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o clkt34xx_dpll3m2.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clock3517.o clock36xx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= dpll3xxx.o cclock3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= dpll3xxx.o
 obj-$(CONFIG_ARCH_OMAP3)		+= clkt_iclk.o
 obj-$(CONFIG_ARCH_OMAP4)		+= $(clock-common)
 obj-$(CONFIG_ARCH_OMAP4)		+= dpll3xxx.o dpll44xx.o

arch/arm/mach-omap2/clock.c

@@ -23,7 +23,6 @@
 #include <linux/clk-provider.h>
 #include <linux/io.h>
 #include <linux/bitops.h>
-#include <linux/clk-private.h>
 #include <asm/cpu.h>
 
 #include <trace/events/power.h>
@@ -629,21 +628,6 @@ const struct clk_hw_omap_ops clkhwops_wait = {
 	.find_companion	= omap2_clk_dflt_find_companion,
 };
 
-/**
- * omap_clocks_register - register an array of omap_clk
- * @ocs: pointer to an array of omap_clk to register
- */
-void __init omap_clocks_register(struct omap_clk oclks[], int cnt)
-{
-	struct omap_clk *c;
-
-	for (c = oclks; c < oclks + cnt; c++) {
-		clkdev_add(&c->lk);
-		if (!__clk_init(NULL, c->lk.clk))
-			omap2_init_clk_hw_omap_clocks(c->lk.clk);
-	}
-}
-
 /**
  * omap2_clk_switch_mpurate_at_boot - switch ARM MPU rate by boot-time argument
  * @mpurate_ck_name: clk name of the clock to change rate

arch/arm/mach-omap2/clock.h

@@ -40,23 +40,29 @@ struct omap_clk {
 struct clockdomain;
 
 #define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name)	\
-	static struct clk _name = {				\
+	static struct clk_core _name##_core = {			\
 		.name = #_name,					\
 		.hw = &_name##_hw.hw,				\
 		.parent_names = _parent_array_name,		\
 		.num_parents = ARRAY_SIZE(_parent_array_name),	\
 		.ops = &_clkops_name,				\
+	};							\
+	static struct clk _name = {				\
+		.core = &_name##_core,				\
 	};
 
 #define DEFINE_STRUCT_CLK_FLAGS(_name, _parent_array_name,	\
 				_clkops_name, _flags)		\
-	static struct clk _name = {				\
+	static struct clk_core _name##_core = {			\
 		.name = #_name,					\
 		.hw = &_name##_hw.hw,				\
 		.parent_names = _parent_array_name,		\
 		.num_parents = ARRAY_SIZE(_parent_array_name),	\
 		.ops = &_clkops_name,				\
 		.flags = _flags,				\
+	};							\
+	static struct clk _name = {				\
+		.core = &_name##_core,				\
 	};
 
 #define DEFINE_STRUCT_CLK_HW_OMAP(_name, _clkdm_name)		\
@@ -239,7 +245,6 @@ struct ti_clk_features {
 extern struct ti_clk_features ti_clk_features;
 
 extern const struct clkops clkops_omap2_dflt_wait;
-extern const struct clkops clkops_dummy;
 extern const struct clkops clkops_omap2_dflt;
 
 extern struct clk_functions omap2_clk_functions;
@@ -248,7 +253,6 @@ extern const struct clksel_rate gpt_32k_rates[];
 extern const struct clksel_rate gpt_sys_rates[];
 extern const struct clksel_rate gfx_l3_rates[];
 extern const struct clksel_rate dsp_ick_rates[];
-extern struct clk dummy_ck;
 
 extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
 extern const struct clk_hw_omap_ops clkhwops_wait;
@@ -273,7 +277,5 @@ extern void __iomem *clk_memmaps[];
 extern int omap2_clkops_enable_clkdm(struct clk_hw *hw);
 extern void omap2_clkops_disable_clkdm(struct clk_hw *hw);
 
-extern void omap_clocks_register(struct omap_clk *oclks, int cnt);
-
 void __init ti_clk_init_features(void);
 #endif

arch/arm/mach-omap2/clock_common_data.c

@@ -16,7 +16,6 @@
  * OMAP3xxx clock definition files.
  */
 
-#include <linux/clk-private.h>
 #include "clock.h"
 
 /* clksel_rate data common to 24xx/343x */
@@ -114,13 +113,3 @@ const struct clksel_rate div31_1to31_rates[] = {
 	{ .div = 31, .val = 31, .flags = RATE_IN_4430 | RATE_IN_AM33XX },
 	{ .div = 0 },
 };
-
-/* Clocks shared between various OMAP SoCs */
-
-static struct clk_ops dummy_ck_ops = {};
-
-struct clk dummy_ck = {
-	.name = "dummy_clk",
-	.ops = &dummy_ck_ops,
-	.flags = CLK_IS_BASIC,
-};

arch/arm/mach-omap2/dpll3xxx.c

@@ -410,7 +410,7 @@ int omap3_noncore_dpll_enable(struct clk_hw *hw)
 	struct clk_hw_omap *clk = to_clk_hw_omap(hw);
 	int r;
 	struct dpll_data *dd;
-	struct clk *parent;
+	struct clk_hw *parent;
 
 	dd = clk->dpll_data;
 	if (!dd)
@@ -427,13 +427,13 @@ int omap3_noncore_dpll_enable(struct clk_hw *hw)
 		}
 	}
 
-	parent = __clk_get_parent(hw->clk);
+	parent = __clk_get_hw(__clk_get_parent(hw->clk));
 
 	if (__clk_get_rate(hw->clk) == __clk_get_rate(dd->clk_bypass)) {
-		WARN_ON(parent != dd->clk_bypass);
+		WARN_ON(parent != __clk_get_hw(dd->clk_bypass));
 		r = _omap3_noncore_dpll_bypass(clk);
 	} else {
-		WARN_ON(parent != dd->clk_ref);
+		WARN_ON(parent != __clk_get_hw(dd->clk_ref));
 		r = _omap3_noncore_dpll_lock(clk);
 	}
 
@@ -473,6 +473,8 @@ void omap3_noncore_dpll_disable(struct clk_hw *hw)
  * in failure.
  */
 long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, unsigned long rate,
+				       unsigned long min_rate,
+				       unsigned long max_rate,
 				       unsigned long *best_parent_rate,
 				       struct clk_hw **best_parent_clk)
 {
@@ -549,7 +551,8 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (!dd)
 		return -EINVAL;
 
-	if (__clk_get_parent(hw->clk) != dd->clk_ref)
+	if (__clk_get_hw(__clk_get_parent(hw->clk)) !=
+	    __clk_get_hw(dd->clk_ref))
 		return -EINVAL;
 
 	if (dd->last_rounded_rate == 0)

arch/arm/mach-omap2/dpll44xx.c

@@ -222,6 +222,8 @@ long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
  * in failure.
  */
 long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw, unsigned long rate,
+					unsigned long min_rate,
+					unsigned long max_rate,
 					unsigned long *best_parent_rate,
 					struct clk_hw **best_parent_clk)
 {

arch/arm/mach-omap2/io.c

@@ -461,7 +461,17 @@ void __init omap3_init_early(void)
 	omap3xxx_clockdomains_init();
 	omap3xxx_hwmod_init();
 	omap_hwmod_init_postsetup();
-	omap_clk_soc_init = omap3xxx_clk_init;
+	if (!of_have_populated_dt()) {
+		omap3_prcm_legacy_iomaps_init();
+		if (soc_is_am35xx())
+			omap_clk_soc_init = am35xx_clk_legacy_init;
+		else if (cpu_is_omap3630())
+			omap_clk_soc_init = omap36xx_clk_legacy_init;
+		else if (omap_rev() == OMAP3430_REV_ES1_0)
+			omap_clk_soc_init = omap3430es1_clk_legacy_init;
+		else
+			omap_clk_soc_init = omap3430_clk_legacy_init;
+	}
 }
 
 void __init omap3430_init_early(void)
@@ -509,8 +519,6 @@ void __init ti81xx_init_early(void)
 	omap_hwmod_init_postsetup();
 	if (of_have_populated_dt())
 		omap_clk_soc_init = ti81xx_dt_clk_init;
-	else
-		omap_clk_soc_init = omap3xxx_clk_init;
 }
 
 void __init omap3_init_late(void)
@@ -731,15 +739,17 @@ int __init omap_clk_init(void)
 
 	ti_clk_init_features();
 
-	ret = of_prcm_init();
-	if (ret)
-		return ret;
+	if (of_have_populated_dt()) {
+		ret = of_prcm_init();
+		if (ret)
+			return ret;
 
-	of_clk_init(NULL);
+		of_clk_init(NULL);
 
-	ti_dt_clk_init_retry_clks();
+		ti_dt_clk_init_retry_clks();
 
-	ti_dt_clockdomains_setup();
+		ti_dt_clockdomains_setup();
+	}
 
 	ret = omap_clk_soc_init();
 

arch/arm/mach-omap2/prm.h

@@ -20,6 +20,7 @@ extern void __iomem *prm_base;
 extern u16 prm_features;
 extern void omap2_set_globals_prm(void __iomem *prm);
 int of_prcm_init(void);
+void omap3_prcm_legacy_iomaps_init(void);
 # endif
 
 /*

arch/arm/mach-omap2/prm_common.c

@@ -35,6 +35,8 @@
 #include "prm44xx.h"
 #include "common.h"
 #include "clock.h"
+#include "cm.h"
+#include "control.h"
 
 /*
  * OMAP_PRCM_MAX_NR_PENDING_REG: maximum number of PRM_IRQ*_MPU regs
@@ -637,6 +639,15 @@ int __init of_prcm_init(void)
 	return 0;
 }
 
+void __init omap3_prcm_legacy_iomaps_init(void)
+{
+	ti_clk_ll_ops = &omap_clk_ll_ops;
+
+	clk_memmaps[TI_CLKM_CM] = cm_base + OMAP3430_IVA2_MOD;
+	clk_memmaps[TI_CLKM_PRM] = prm_base + OMAP3430_IVA2_MOD;
+	clk_memmaps[TI_CLKM_SCRM] = omap_ctrl_base_get();
+}
+
 static int __init prm_late_init(void)
 {
 	if (prm_ll_data->late_init)

arch/mips/alchemy/common/clock.c

@@ -373,6 +373,8 @@ static long alchemy_calc_div(unsigned long rate, unsigned long prate,
 }
 
 static long alchemy_clk_fgcs_detr(struct clk_hw *hw, unsigned long rate,
+					unsigned long min_rate,
+					unsigned long max_rate,
 					unsigned long *best_parent_rate,
 					struct clk_hw **best_parent_clk,
 					int scale, int maxdiv)
@@ -546,6 +548,8 @@ static unsigned long alchemy_clk_fgv1_recalc(struct clk_hw *hw,
 }
 
 static long alchemy_clk_fgv1_detr(struct clk_hw *hw, unsigned long rate,
+					unsigned long min_rate,
+					unsigned long max_rate,
 					unsigned long *best_parent_rate,
 					struct clk_hw **best_parent_clk)
 {
@@ -678,6 +682,8 @@ static unsigned long alchemy_clk_fgv2_recalc(struct clk_hw *hw,
 }
 
 static long alchemy_clk_fgv2_detr(struct clk_hw *hw, unsigned long rate,
+					unsigned long min_rate,
+					unsigned long max_rate,
 					unsigned long *best_parent_rate,
 					struct clk_hw **best_parent_clk)
 {
@@ -897,6 +903,8 @@ static int alchemy_clk_csrc_setr(struct clk_hw *hw, unsigned long rate,
 }
 
 static long alchemy_clk_csrc_detr(struct clk_hw *hw, unsigned long rate,
+					unsigned long min_rate,
+					unsigned long max_rate,
 					unsigned long *best_parent_rate,
 					struct clk_hw **best_parent_clk)
 {

arch/powerpc/kernel/time.c

@@ -54,6 +54,7 @@
 #include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/irq_work.h>
+#include <linux/clk-provider.h>
 #include <asm/trace.h>
 
 #include <asm/io.h>
@@ -943,6 +944,10 @@ void __init time_init(void)
 
 	init_decrementer_clockevent();
 	tick_setup_hrtimer_broadcast();
+
+#ifdef CONFIG_COMMON_CLK
+	of_clk_init(NULL);
+#endif
 }
 
 

arch/powerpc/platforms/512x/clock-commonclk.c

@@ -1168,6 +1168,11 @@ static void mpc5121_clk_provide_backwards_compat(void)
 	}
 }
 
+/*
+ * The "fixed-clock" nodes (which includes the oscillator node if the board's
+ * DT provides one) has already been scanned by the of_clk_init() in
+ * time_init().
+ */
 int __init mpc5121_clk_init(void)
 {
 	struct device_node *clk_np;
@@ -1186,12 +1191,6 @@ int __init mpc5121_clk_init(void)
 	/* invalidate all not yet registered clock slots */
 	mpc512x_clk_preset_data();
 
-	/*
-	 * have the device tree scanned for "fixed-clock" nodes (which
-	 * includes the oscillator node if the board's DT provides one)
-	 */
-	of_clk_init(NULL);
-
 	/*
 	 * add a dummy clock for those situations where a clock spec is
 	 * required yet no real clock is involved

drivers/clk/Kconfig

@@ -101,12 +101,12 @@ config COMMON_CLK_AXI_CLKGEN
 	  Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx
 	  FPGAs. It is commonly used in Analog Devices' reference designs.
 
-config CLK_PPC_CORENET
-	bool "Clock driver for PowerPC corenet platforms"
-	depends on PPC_E500MC && OF
+config CLK_QORIQ
+	bool "Clock driver for Freescale QorIQ platforms"
+	depends on (PPC_E500MC || ARM) && OF
 	---help---
-	  This adds the clock driver support for Freescale PowerPC corenet
-	  platforms using common clock framework.
+	  This adds the clock driver support for Freescale QorIQ platforms
+	  using common clock framework.
 
 config COMMON_CLK_XGENE
 	bool "Clock driver for APM XGene SoC"
@@ -134,6 +134,14 @@ config COMMON_CLK_PXA
 	---help---
 	  Sypport for the Marvell PXA SoC.
 
+config COMMON_CLK_CDCE706
+	tristate "Clock driver for TI CDCE706 clock synthesizer"
+	depends on I2C
+	select REGMAP_I2C
+	select RATIONAL
+	---help---
+	  This driver supports TI CDCE706 programmable 3-PLL clock synthesizer.
+
 source "drivers/clk/qcom/Kconfig"
 
 endmenu

drivers/clk/Makefile

@@ -16,9 +16,11 @@ endif
 
 # hardware specific clock types
 # please keep this section sorted lexicographically by file/directory path name
+obj-$(CONFIG_MACH_ASM9260)		+= clk-asm9260.o
 obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN)	+= clk-axi-clkgen.o
 obj-$(CONFIG_ARCH_AXXIA)		+= clk-axm5516.o
 obj-$(CONFIG_ARCH_BCM2835)		+= clk-bcm2835.o
+obj-$(CONFIG_COMMON_CLK_CDCE706)	+= clk-cdce706.o
 obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o
 obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o
 obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
@@ -30,7 +32,7 @@ obj-$(CONFIG_ARCH_MOXART)		+= clk-moxart.o
 obj-$(CONFIG_ARCH_NOMADIK)		+= clk-nomadik.o
 obj-$(CONFIG_ARCH_NSPIRE)		+= clk-nspire.o
 obj-$(CONFIG_COMMON_CLK_PALMAS)		+= clk-palmas.o
-obj-$(CONFIG_CLK_PPC_CORENET)		+= clk-ppc-corenet.o
+obj-$(CONFIG_CLK_QORIQ)			+= clk-qoriq.o
 obj-$(CONFIG_COMMON_CLK_RK808)		+= clk-rk808.o
 obj-$(CONFIG_COMMON_CLK_S2MPS11)	+= clk-s2mps11.o
 obj-$(CONFIG_COMMON_CLK_SI5351)		+= clk-si5351.o

drivers/clk/at91/clk-programmable.c

@@ -56,6 +56,8 @@ static unsigned long clk_programmable_recalc_rate(struct clk_hw *hw,
 
 static long clk_programmable_determine_rate(struct clk_hw *hw,
 					    unsigned long rate,
+					    unsigned long min_rate,
+					    unsigned long max_rate,
 					    unsigned long *best_parent_rate,
 					    struct clk_hw **best_parent_hw)
 {

drivers/clk/bcm/clk-kona.c

@@ -1032,6 +1032,8 @@ static long kona_peri_clk_round_rate(struct clk_hw *hw, unsigned long rate,
 }
 
 static long kona_peri_clk_determine_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long min_rate,
+		unsigned long max_rate,
 		unsigned long *best_parent_rate, struct clk_hw **best_parent)
 {
 	struct kona_clk *bcm_clk = to_kona_clk(hw);

drivers/clk/clk-composite.c

@@ -56,6 +56,8 @@ static unsigned long clk_composite_recalc_rate(struct clk_hw *hw,
 }
 
 static long clk_composite_determine_rate(struct clk_hw *hw, unsigned long rate,
+					unsigned long min_rate,
+					unsigned long max_rate,
 					unsigned long *best_parent_rate,
 					struct clk_hw **best_parent_p)
 {
@@ -73,7 +75,9 @@ static long clk_composite_determine_rate(struct clk_hw *hw, unsigned long rate,
 
 	if (rate_hw && rate_ops && rate_ops->determine_rate) {
 		rate_hw->clk = hw->clk;
-		return rate_ops->determine_rate(rate_hw, rate, best_parent_rate,
+		return rate_ops->determine_rate(rate_hw, rate, min_rate,
+						max_rate,
+						best_parent_rate,
 						best_parent_p);
 	} else if (rate_hw && rate_ops && rate_ops->round_rate &&
 		   mux_hw && mux_ops && mux_ops->set_parent) {
@@ -117,7 +121,8 @@ static long clk_composite_determine_rate(struct clk_hw *hw, unsigned long rate,
 		return best_rate;
 	} else if (mux_hw && mux_ops && mux_ops->determine_rate) {
 		mux_hw->clk = hw->clk;
-		return mux_ops->determine_rate(mux_hw, rate, best_parent_rate,
+		return mux_ops->determine_rate(mux_hw, rate, min_rate,
+					       max_rate, best_parent_rate,
 					       best_parent_p);
 	} else {
 		pr_err("clk: clk_composite_determine_rate function called, but no mux or rate callback set!\n");

drivers/clk/clk-gate.c

@@ -128,7 +128,7 @@ struct clk *clk_register_gate(struct device *dev, const char *name,
 	struct clk_init_data init;
 
 	if (clk_gate_flags & CLK_GATE_HIWORD_MASK) {
-		if (bit_idx > 16) {
+		if (bit_idx > 15) {
 			pr_err("gate bit exceeds LOWORD field\n");
 			return ERR_PTR(-EINVAL);
 		}
@@ -162,3 +162,19 @@ struct clk *clk_register_gate(struct device *dev, const char *name,
 	return clk;
 }
 EXPORT_SYMBOL_GPL(clk_register_gate);
+
+void clk_unregister_gate(struct clk *clk)
+{
+	struct clk_gate *gate;
+	struct clk_hw *hw;
+
+	hw = __clk_get_hw(clk);
+	if (!hw)
+		return;
+
+	gate = to_clk_gate(hw);
+
+	clk_unregister(clk);
+	kfree(gate);
+}
+EXPORT_SYMBOL_GPL(clk_unregister_gate);

drivers/clk/clk-mux.c

@@ -177,3 +177,19 @@ struct clk *clk_register_mux(struct device *dev, const char *name,
 				      NULL, lock);
 }
 EXPORT_SYMBOL_GPL(clk_register_mux);
+
+void clk_unregister_mux(struct clk *clk)
+{
+	struct clk_mux *mux;
+	struct clk_hw *hw;
+
+	hw = __clk_get_hw(clk);
+	if (!hw)
+		return;
+
+	mux = to_clk_mux(hw);
+
+	clk_unregister(clk);
+	kfree(mux);
+}
+EXPORT_SYMBOL_GPL(clk_unregister_mux);

drivers/clk/clk-ppc-corenet.c → drivers/clk/clk-qoriq.c

@@ -5,8 +5,11 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * clock driver for Freescale PowerPC corenet SoCs.
+ * clock driver for Freescale QorIQ SoCs.
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/clk-provider.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
@@ -19,6 +22,7 @@
 struct cmux_clk {
 	struct clk_hw hw;
 	void __iomem *reg;
+	unsigned int clk_per_pll;
 	u32 flags;
 };
 
@@ -27,14 +31,12 @@ struct cmux_clk {
 #define CLKSEL_ADJUST		BIT(0)
 #define to_cmux_clk(p)		container_of(p, struct cmux_clk, hw)
 
-static unsigned int clocks_per_pll;
-
 static int cmux_set_parent(struct clk_hw *hw, u8 idx)
 {
 	struct cmux_clk *clk = to_cmux_clk(hw);
 	u32 clksel;
 
-	clksel = ((idx / clocks_per_pll) << 2) + idx % clocks_per_pll;
+	clksel = ((idx / clk->clk_per_pll) << 2) + idx % clk->clk_per_pll;
 	if (clk->flags & CLKSEL_ADJUST)
 		clksel += 8;
 	clksel = (clksel & 0xf) << CLKSEL_SHIFT;
@@ -52,12 +54,12 @@ static u8 cmux_get_parent(struct clk_hw *hw)
 	clksel = (clksel >> CLKSEL_SHIFT) & 0xf;
 	if (clk->flags & CLKSEL_ADJUST)
 		clksel -= 8;
-	clksel = (clksel >> 2) * clocks_per_pll + clksel % 4;
+	clksel = (clksel >> 2) * clk->clk_per_pll + clksel % 4;
 
 	return clksel;
 }
 
-const struct clk_ops cmux_ops = {
+static const struct clk_ops cmux_ops = {
 	.get_parent = cmux_get_parent,
 	.set_parent = cmux_set_parent,
 };
@@ -72,6 +74,7 @@ static void __init core_mux_init(struct device_node *np)
 	u32	offset;
 	const char *clk_name;
 	const char **parent_names;
+	struct of_phandle_args clkspec;
 
 	rc = of_property_read_u32(np, "reg", &offset);
 	if (rc) {
@@ -85,32 +88,40 @@ static void __init core_mux_init(struct device_node *np)
 		pr_err("%s: get clock count error\n", np->name);
 		return;
 	}
-	parent_names = kzalloc((sizeof(char *) * count), GFP_KERNEL);
-	if (!parent_names) {
-		pr_err("%s: could not allocate parent_names\n", __func__);
+	parent_names = kcalloc(count, sizeof(char *), GFP_KERNEL);
+	if (!parent_names)
 		return;
-	}
 
 	for (i = 0; i < count; i++)
 		parent_names[i] = of_clk_get_parent_name(np, i);
 
-	cmux_clk = kzalloc(sizeof(struct cmux_clk), GFP_KERNEL);
-	if (!cmux_clk) {
-		pr_err("%s: could not allocate cmux_clk\n", __func__);
+	cmux_clk = kzalloc(sizeof(*cmux_clk), GFP_KERNEL);
+	if (!cmux_clk)
 		goto err_name;
-	}
+
 	cmux_clk->reg = of_iomap(np, 0);
 	if (!cmux_clk->reg) {
 		pr_err("%s: could not map register\n", __func__);
 		goto err_clk;
 	}
 
+	rc = of_parse_phandle_with_args(np, "clocks", "#clock-cells", 0,
+					&clkspec);
+	if (rc) {
+		pr_err("%s: parse clock node error\n", __func__);
+		goto err_clk;
+	}
+
+	cmux_clk->clk_per_pll = of_property_count_strings(clkspec.np,
+			"clock-output-names");
+	of_node_put(clkspec.np);
+
 	node = of_find_compatible_node(NULL, NULL, "fsl,p4080-clockgen");
 	if (node && (offset >= 0x80))
 		cmux_clk->flags = CLKSEL_ADJUST;
 
 	rc = of_property_read_string_index(np, "clock-output-names",
-			0, &clk_name);
+					   0, &clk_name);
 	if (rc) {
 		pr_err("%s: read clock names error\n", np->name);
 		goto err_clk;
@@ -132,7 +143,7 @@ static void __init core_mux_init(struct device_node *np)
 	rc = of_clk_add_provider(np, of_clk_src_simple_get, clk);
 	if (rc) {
 		pr_err("Could not register clock provider for node:%s\n",
-			 np->name);
+		       np->name);
 		goto err_clk;
 	}
 	goto err_name;
@@ -155,7 +166,7 @@ static void __init core_pll_init(struct device_node *np)
 
 	base = of_iomap(np, 0);
 	if (!base) {
-		pr_err("clk-ppc: iomap error\n");
+		pr_err("iomap error\n");
 		return;
 	}
 
@@ -181,24 +192,17 @@ static void __init core_pll_init(struct device_node *np)
 		goto err_map;
 	}
 
-	/* output clock number per PLL */
-	clocks_per_pll = count;
-
-	subclks = kzalloc(sizeof(struct clk *) * count, GFP_KERNEL);
-	if (!subclks) {
-		pr_err("%s: could not allocate subclks\n", __func__);
+	subclks = kcalloc(count, sizeof(struct clk *), GFP_KERNEL);
+	if (!subclks)
 		goto err_map;
-	}
 
-	onecell_data = kzalloc(sizeof(struct clk_onecell_data), GFP_KERNEL);
-	if (!onecell_data) {
-		pr_err("%s: could not allocate onecell_data\n", __func__);
+	onecell_data = kmalloc(sizeof(*onecell_data), GFP_KERNEL);
+	if (!onecell_data)
 		goto err_clks;
-	}
 
 	for (i = 0; i < count; i++) {
 		rc = of_property_read_string_index(np, "clock-output-names",
-				i, &clk_name);
+						   i, &clk_name);
 		if (rc) {
 			pr_err("%s: could not get clock names\n", np->name);
 			goto err_cell;
@@ -230,7 +234,7 @@ static void __init core_pll_init(struct device_node *np)
 	rc = of_clk_add_provider(np, of_clk_src_onecell_get, onecell_data);
 	if (rc) {
 		pr_err("Could not register clk provider for node:%s\n",
-			 np->name);
+		       np->name);
 		goto err_cell;
 	}
 
@@ -252,7 +256,7 @@ static void __init sysclk_init(struct device_node *node)
 	u32 rate;
 
 	if (!np) {
-		pr_err("ppc-clk: could not get parent node\n");
+		pr_err("could not get parent node\n");
 		return;
 	}
 
@@ -267,40 +271,9 @@ static void __init sysclk_init(struct device_node *node)
 	if (!IS_ERR(clk))
 		of_clk_add_provider(np, of_clk_src_simple_get, clk);
 }
-
-static const struct of_device_id clk_match[] __initconst = {
-	{ .compatible = "fsl,qoriq-sysclk-1.0", .data = sysclk_init, },
-	{ .compatible = "fsl,qoriq-sysclk-2.0", .data = sysclk_init, },
-	{ .compatible = "fsl,qoriq-core-pll-1.0", .data = core_pll_init, },
-	{ .compatible = "fsl,qoriq-core-pll-2.0", .data = core_pll_init, },
-	{ .compatible = "fsl,qoriq-core-mux-1.0", .data = core_mux_init, },
-	{ .compatible = "fsl,qoriq-core-mux-2.0", .data = core_mux_init, },
-	{}
-};
-
-static int __init ppc_corenet_clk_probe(struct platform_device *pdev)
-{
-	of_clk_init(clk_match);
-
-	return 0;
-}
-
-static const struct of_device_id ppc_clk_ids[] __initconst = {
-	{ .compatible = "fsl,qoriq-clockgen-1.0", },
-	{ .compatible = "fsl,qoriq-clockgen-2.0", },
-	{}
-};
-
-static struct platform_driver ppc_corenet_clk_driver = {
-	.driver = {
-		.name = "ppc_corenet_clock",
-		.of_match_table = ppc_clk_ids,
-	},
-	.probe = ppc_corenet_clk_probe,
-};
-
-static int __init ppc_corenet_clk_init(void)
-{
-	return platform_driver_register(&ppc_corenet_clk_driver);
-}
-subsys_initcall(ppc_corenet_clk_init);
+CLK_OF_DECLARE(qoriq_sysclk_1, "fsl,qoriq-sysclk-1.0", sysclk_init);
+CLK_OF_DECLARE(qoriq_sysclk_2, "fsl,qoriq-sysclk-2.0", sysclk_init);
+CLK_OF_DECLARE(qoriq_core_pll_1, "fsl,qoriq-core-pll-1.0", core_pll_init);
+CLK_OF_DECLARE(qoriq_core_pll_2, "fsl,qoriq-core-pll-2.0", core_pll_init);
+CLK_OF_DECLARE(qoriq_core_mux_1, "fsl,qoriq-core-mux-1.0", core_mux_init);
+CLK_OF_DECLARE(qoriq_core_mux_2, "fsl,qoriq-core-mux-2.0", core_mux_init);

drivers/clk/clk.h

@@ -9,9 +9,14 @@
  * published by the Free Software Foundation.
  */
 
+struct clk_hw;
+
 #if defined(CONFIG_OF) && defined(CONFIG_COMMON_CLK)
 struct clk *of_clk_get_by_clkspec(struct of_phandle_args *clkspec);
 struct clk *__of_clk_get_from_provider(struct of_phandle_args *clkspec);
 void of_clk_lock(void);
 void of_clk_unlock(void);
 #endif
+
+struct clk *__clk_create_clk(struct clk_hw *hw, const char *dev_id,
+			     const char *con_id);

drivers/clk/hisilicon/clk-hi3620.c

@@ -295,6 +295,8 @@ static unsigned long mmc_clk_recalc_rate(struct clk_hw *hw,
 }
 
 static long mmc_clk_determine_rate(struct clk_hw *hw, unsigned long rate,
+			      unsigned long min_rate,
+			      unsigned long max_rate,
 			      unsigned long *best_parent_rate,
 			      struct clk_hw **best_parent_p)
 {

drivers/clk/mmp/clk-mix.c

@@ -202,6 +202,8 @@ static int _set_rate(struct mmp_clk_mix *mix, u32 mux_val, u32 div_val,
 }
 
 static long mmp_clk_mix_determine_rate(struct clk_hw *hw, unsigned long rate,
+					unsigned long min_rate,
+					unsigned long max_rate,
 					unsigned long *best_parent_rate,
 					struct clk_hw **best_parent_clk)
 {

drivers/clk/pxa/Makefile

 obj-y				+= clk-pxa.o
 obj-$(CONFIG_PXA25x)		+= clk-pxa25x.o
 obj-$(CONFIG_PXA27x)		+= clk-pxa27x.o
+obj-$(CONFIG_PXA3xx)		+= clk-pxa3xx.o

drivers/clk/qcom/Kconfig

@@ -29,6 +29,15 @@ config IPQ_GCC_806X
 	  Say Y if you want to use peripheral devices such as UART, SPI,
 	  i2c, USB, SD/eMMC, etc.
 
+config IPQ_LCC_806X
+	tristate "IPQ806x LPASS Clock Controller"
+	select IPQ_GCC_806X
+	depends on COMMON_CLK_QCOM
+	help
+	  Support for the LPASS clock controller on ipq806x devices.
+	  Say Y if you want to use audio devices such as i2s, pcm,
+	  S/PDIF, etc.
+
 config MSM_GCC_8660
 	tristate "MSM8660 Global Clock Controller"
 	depends on COMMON_CLK_QCOM
@@ -45,6 +54,15 @@ config MSM_GCC_8960
 	  Say Y if you want to use peripheral devices such as UART, SPI,
 	  i2c, USB, SD/eMMC, SATA, PCIe, etc.
 
+config MSM_LCC_8960
+	tristate "APQ8064/MSM8960 LPASS Clock Controller"
+	select MSM_GCC_8960
+	depends on COMMON_CLK_QCOM
+	help
+	  Support for the LPASS clock controller on apq8064/msm8960 devices.
+	  Say Y if you want to use audio devices such as i2s, pcm,
+	  SLIMBus, etc.
+
 config MSM_MMCC_8960
 	tristate "MSM8960 Multimedia Clock Controller"
 	select MSM_GCC_8960

drivers/clk/qcom/Makefile

@@ -6,13 +6,17 @@ clk-qcom-y += clk-pll.o
 clk-qcom-y += clk-rcg.o
 clk-qcom-y += clk-rcg2.o
 clk-qcom-y += clk-branch.o
+clk-qcom-y += clk-regmap-divider.o
+clk-qcom-y += clk-regmap-mux.o
 clk-qcom-y += reset.o
 
 obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
 obj-$(CONFIG_APQ_MMCC_8084) += mmcc-apq8084.o
 obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
+obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o
 obj-$(CONFIG_MSM_GCC_8660) += gcc-msm8660.o
 obj-$(CONFIG_MSM_GCC_8960) += gcc-msm8960.o
+obj-$(CONFIG_MSM_LCC_8960) += lcc-msm8960.o
 obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o
 obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
 obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o

drivers/clk/qcom/clk-pll.c

@@ -141,6 +141,7 @@ struct pll_freq_tbl *find_freq(const struct pll_freq_tbl *f, unsigned long rate)
 
 static long
 clk_pll_determine_rate(struct clk_hw *hw, unsigned long rate,
+		       unsigned long min_rate, unsigned long max_rate,
 		       unsigned long *p_rate, struct clk_hw **p)
 {
 	struct clk_pll *pll = to_clk_pll(hw);

drivers/clk/samsung/clk.h

@@ -392,7 +392,8 @@ extern void __init samsung_clk_register_pll(struct samsung_clk_provider *ctx,
 			struct samsung_pll_clock *pll_list,
 			unsigned int nr_clk, void __iomem *base);
 
-extern void __init samsung_cmu_register_one(struct device_node *,
+extern struct samsung_clk_provider __init *samsung_cmu_register_one(
+			struct device_node *,
 			struct samsung_cmu_info *);
 
 extern unsigned long _get_rate(const char *clk_name);

drivers/clk/shmobile/Makefile

 obj-$(CONFIG_ARCH_EMEV2)		+= clk-emev2.o
 obj-$(CONFIG_ARCH_R7S72100)		+= clk-rz.o
+obj-$(CONFIG_ARCH_R8A73A4)		+= clk-r8a73a4.o
 obj-$(CONFIG_ARCH_R8A7740)		+= clk-r8a7740.o
 obj-$(CONFIG_ARCH_R8A7779)		+= clk-r8a7779.o
 obj-$(CONFIG_ARCH_R8A7790)		+= clk-rcar-gen2.o
 obj-$(CONFIG_ARCH_R8A7791)		+= clk-rcar-gen2.o
+obj-$(CONFIG_ARCH_R8A7793)		+= clk-rcar-gen2.o
 obj-$(CONFIG_ARCH_R8A7794)		+= clk-rcar-gen2.o
 obj-$(CONFIG_ARCH_SHMOBILE_MULTI)	+= clk-div6.o
 obj-$(CONFIG_ARCH_SHMOBILE_MULTI)	+= clk-mstp.o