Commit 54ff892b authored by Mathieu Poirier's avatar Mathieu Poirier Committed by Greg Kroah-Hartman

coresight: etm4x: splitting struct etmv4_drvdata

Similar to what was done on etm3x, splitting driver structure
etmv4_drvdata in two.  One half is concerned with the HW
characteristics that are generally static in nature.  The other
half deals with user configuration and will change from one
trace session to another.

No gain/loss of functionality is incurred from this patch.
Signed-off-by: default avatarMathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 7c38aa4b
...@@ -95,6 +95,7 @@ static void etm4_enable_hw(void *info) ...@@ -95,6 +95,7 @@ static void etm4_enable_hw(void *info)
{ {
int i; int i;
struct etmv4_drvdata *drvdata = info; struct etmv4_drvdata *drvdata = info;
struct etmv4_config *config = &drvdata->config;
CS_UNLOCK(drvdata->base); CS_UNLOCK(drvdata->base);
...@@ -109,69 +110,69 @@ static void etm4_enable_hw(void *info) ...@@ -109,69 +110,69 @@ static void etm4_enable_hw(void *info)
"timeout observed when probing at offset %#x\n", "timeout observed when probing at offset %#x\n",
TRCSTATR); TRCSTATR);
writel_relaxed(drvdata->pe_sel, drvdata->base + TRCPROCSELR); writel_relaxed(config->pe_sel, drvdata->base + TRCPROCSELR);
writel_relaxed(drvdata->cfg, drvdata->base + TRCCONFIGR); writel_relaxed(config->cfg, drvdata->base + TRCCONFIGR);
/* nothing specific implemented */ /* nothing specific implemented */
writel_relaxed(0x0, drvdata->base + TRCAUXCTLR); writel_relaxed(0x0, drvdata->base + TRCAUXCTLR);
writel_relaxed(drvdata->eventctrl0, drvdata->base + TRCEVENTCTL0R); writel_relaxed(config->eventctrl0, drvdata->base + TRCEVENTCTL0R);
writel_relaxed(drvdata->eventctrl1, drvdata->base + TRCEVENTCTL1R); writel_relaxed(config->eventctrl1, drvdata->base + TRCEVENTCTL1R);
writel_relaxed(drvdata->stall_ctrl, drvdata->base + TRCSTALLCTLR); writel_relaxed(config->stall_ctrl, drvdata->base + TRCSTALLCTLR);
writel_relaxed(drvdata->ts_ctrl, drvdata->base + TRCTSCTLR); writel_relaxed(config->ts_ctrl, drvdata->base + TRCTSCTLR);
writel_relaxed(drvdata->syncfreq, drvdata->base + TRCSYNCPR); writel_relaxed(config->syncfreq, drvdata->base + TRCSYNCPR);
writel_relaxed(drvdata->ccctlr, drvdata->base + TRCCCCTLR); writel_relaxed(config->ccctlr, drvdata->base + TRCCCCTLR);
writel_relaxed(drvdata->bb_ctrl, drvdata->base + TRCBBCTLR); writel_relaxed(config->bb_ctrl, drvdata->base + TRCBBCTLR);
writel_relaxed(drvdata->trcid, drvdata->base + TRCTRACEIDR); writel_relaxed(drvdata->trcid, drvdata->base + TRCTRACEIDR);
writel_relaxed(drvdata->vinst_ctrl, drvdata->base + TRCVICTLR); writel_relaxed(config->vinst_ctrl, drvdata->base + TRCVICTLR);
writel_relaxed(drvdata->viiectlr, drvdata->base + TRCVIIECTLR); writel_relaxed(config->viiectlr, drvdata->base + TRCVIIECTLR);
writel_relaxed(drvdata->vissctlr, writel_relaxed(config->vissctlr,
drvdata->base + TRCVISSCTLR); drvdata->base + TRCVISSCTLR);
writel_relaxed(drvdata->vipcssctlr, writel_relaxed(config->vipcssctlr,
drvdata->base + TRCVIPCSSCTLR); drvdata->base + TRCVIPCSSCTLR);
for (i = 0; i < drvdata->nrseqstate - 1; i++) for (i = 0; i < drvdata->nrseqstate - 1; i++)
writel_relaxed(drvdata->seq_ctrl[i], writel_relaxed(config->seq_ctrl[i],
drvdata->base + TRCSEQEVRn(i)); drvdata->base + TRCSEQEVRn(i));
writel_relaxed(drvdata->seq_rst, drvdata->base + TRCSEQRSTEVR); writel_relaxed(config->seq_rst, drvdata->base + TRCSEQRSTEVR);
writel_relaxed(drvdata->seq_state, drvdata->base + TRCSEQSTR); writel_relaxed(config->seq_state, drvdata->base + TRCSEQSTR);
writel_relaxed(drvdata->ext_inp, drvdata->base + TRCEXTINSELR); writel_relaxed(config->ext_inp, drvdata->base + TRCEXTINSELR);
for (i = 0; i < drvdata->nr_cntr; i++) { for (i = 0; i < drvdata->nr_cntr; i++) {
writel_relaxed(drvdata->cntrldvr[i], writel_relaxed(config->cntrldvr[i],
drvdata->base + TRCCNTRLDVRn(i)); drvdata->base + TRCCNTRLDVRn(i));
writel_relaxed(drvdata->cntr_ctrl[i], writel_relaxed(config->cntr_ctrl[i],
drvdata->base + TRCCNTCTLRn(i)); drvdata->base + TRCCNTCTLRn(i));
writel_relaxed(drvdata->cntr_val[i], writel_relaxed(config->cntr_val[i],
drvdata->base + TRCCNTVRn(i)); drvdata->base + TRCCNTVRn(i));
} }
/* Resource selector pair 0 is always implemented and reserved */ /* Resource selector pair 0 is always implemented and reserved */
for (i = 2; i < drvdata->nr_resource * 2; i++) for (i = 0; i < drvdata->nr_resource * 2; i++)
writel_relaxed(drvdata->res_ctrl[i], writel_relaxed(config->res_ctrl[i],
drvdata->base + TRCRSCTLRn(i)); drvdata->base + TRCRSCTLRn(i));
for (i = 0; i < drvdata->nr_ss_cmp; i++) { for (i = 0; i < drvdata->nr_ss_cmp; i++) {
writel_relaxed(drvdata->ss_ctrl[i], writel_relaxed(config->ss_ctrl[i],
drvdata->base + TRCSSCCRn(i)); drvdata->base + TRCSSCCRn(i));
writel_relaxed(drvdata->ss_status[i], writel_relaxed(config->ss_status[i],
drvdata->base + TRCSSCSRn(i)); drvdata->base + TRCSSCSRn(i));
writel_relaxed(drvdata->ss_pe_cmp[i], writel_relaxed(config->ss_pe_cmp[i],
drvdata->base + TRCSSPCICRn(i)); drvdata->base + TRCSSPCICRn(i));
} }
for (i = 0; i < drvdata->nr_addr_cmp; i++) { for (i = 0; i < drvdata->nr_addr_cmp; i++) {
writeq_relaxed(drvdata->addr_val[i], writeq_relaxed(config->addr_val[i],
drvdata->base + TRCACVRn(i)); drvdata->base + TRCACVRn(i));
writeq_relaxed(drvdata->addr_acc[i], writeq_relaxed(config->addr_acc[i],
drvdata->base + TRCACATRn(i)); drvdata->base + TRCACATRn(i));
} }
for (i = 0; i < drvdata->numcidc; i++) for (i = 0; i < drvdata->numcidc; i++)
writeq_relaxed(drvdata->ctxid_pid[i], writeq_relaxed(config->ctxid_pid[i],
drvdata->base + TRCCIDCVRn(i)); drvdata->base + TRCCIDCVRn(i));
writel_relaxed(drvdata->ctxid_mask0, drvdata->base + TRCCIDCCTLR0); writel_relaxed(config->ctxid_mask0, drvdata->base + TRCCIDCCTLR0);
writel_relaxed(drvdata->ctxid_mask1, drvdata->base + TRCCIDCCTLR1); writel_relaxed(config->ctxid_mask1, drvdata->base + TRCCIDCCTLR1);
for (i = 0; i < drvdata->numvmidc; i++) for (i = 0; i < drvdata->numvmidc; i++)
writeq_relaxed(drvdata->vmid_val[i], writeq_relaxed(config->vmid_val[i],
drvdata->base + TRCVMIDCVRn(i)); drvdata->base + TRCVMIDCVRn(i));
writel_relaxed(drvdata->vmid_mask0, drvdata->base + TRCVMIDCCTLR0); writel_relaxed(config->vmid_mask0, drvdata->base + TRCVMIDCCTLR0);
writel_relaxed(drvdata->vmid_mask1, drvdata->base + TRCVMIDCCTLR1); writel_relaxed(config->vmid_mask1, drvdata->base + TRCVMIDCCTLR1);
/* Enable the trace unit */ /* Enable the trace unit */
writel_relaxed(1, drvdata->base + TRCPRGCTLR); writel_relaxed(1, drvdata->base + TRCPRGCTLR);
...@@ -438,83 +439,84 @@ static void etm4_init_arch_data(void *info) ...@@ -438,83 +439,84 @@ static void etm4_init_arch_data(void *info)
static void etm4_init_default_data(struct etmv4_drvdata *drvdata) static void etm4_init_default_data(struct etmv4_drvdata *drvdata)
{ {
int i; int i;
struct etmv4_config *config = &drvdata->config;
drvdata->pe_sel = 0x0; config->pe_sel = 0x0;
drvdata->cfg = (ETMv4_MODE_CTXID | ETM_MODE_VMID | config->cfg = (ETMv4_MODE_CTXID | ETM_MODE_VMID |
ETMv4_MODE_TIMESTAMP | ETM_MODE_RETURNSTACK); ETMv4_MODE_TIMESTAMP | ETM_MODE_RETURNSTACK);
/* disable all events tracing */ /* disable all events tracing */
drvdata->eventctrl0 = 0x0; config->eventctrl0 = 0x0;
drvdata->eventctrl1 = 0x0; config->eventctrl1 = 0x0;
/* disable stalling */ /* disable stalling */
drvdata->stall_ctrl = 0x0; config->stall_ctrl = 0x0;
/* disable timestamp event */ /* disable timestamp event */
drvdata->ts_ctrl = 0x0; config->ts_ctrl = 0x0;
/* enable trace synchronization every 4096 bytes for trace */ /* enable trace synchronization every 4096 bytes for trace */
if (drvdata->syncpr == false) if (drvdata->syncpr == false)
drvdata->syncfreq = 0xC; config->syncfreq = 0xC;
/* /*
* enable viewInst to trace everything with start-stop logic in * enable viewInst to trace everything with start-stop logic in
* started state * started state
*/ */
drvdata->vinst_ctrl |= BIT(0); config->vinst_ctrl |= BIT(0);
/* set initial state of start-stop logic */ /* set initial state of start-stop logic */
if (drvdata->nr_addr_cmp) if (drvdata->nr_addr_cmp)
drvdata->vinst_ctrl |= BIT(9); config->vinst_ctrl |= BIT(9);
/* no address range filtering for ViewInst */ /* no address range filtering for ViewInst */
drvdata->viiectlr = 0x0; config->viiectlr = 0x0;
/* no start-stop filtering for ViewInst */ /* no start-stop filtering for ViewInst */
drvdata->vissctlr = 0x0; config->vissctlr = 0x0;
/* disable seq events */ /* disable seq events */
for (i = 0; i < drvdata->nrseqstate-1; i++) for (i = 0; i < drvdata->nrseqstate-1; i++)
drvdata->seq_ctrl[i] = 0x0; config->seq_ctrl[i] = 0x0;
drvdata->seq_rst = 0x0; config->seq_rst = 0x0;
drvdata->seq_state = 0x0; config->seq_state = 0x0;
/* disable external input events */ /* disable external input events */
drvdata->ext_inp = 0x0; config->ext_inp = 0x0;
for (i = 0; i < drvdata->nr_cntr; i++) { for (i = 0; i < drvdata->nr_cntr; i++) {
drvdata->cntrldvr[i] = 0x0; config->cntrldvr[i] = 0x0;
drvdata->cntr_ctrl[i] = 0x0; config->cntr_ctrl[i] = 0x0;
drvdata->cntr_val[i] = 0x0; config->cntr_val[i] = 0x0;
} }
/* Resource selector pair 0 is always implemented and reserved */ /* Resource selector pair 0 is always implemented and reserved */
drvdata->res_idx = 0x2; config->res_idx = 0x2;
for (i = 2; i < drvdata->nr_resource * 2; i++) for (i = 2; i < drvdata->nr_resource * 2; i++)
drvdata->res_ctrl[i] = 0x0; config->res_ctrl[i] = 0x0;
for (i = 0; i < drvdata->nr_ss_cmp; i++) { for (i = 0; i < drvdata->nr_ss_cmp; i++) {
drvdata->ss_ctrl[i] = 0x0; config->ss_ctrl[i] = 0x0;
drvdata->ss_pe_cmp[i] = 0x0; config->ss_pe_cmp[i] = 0x0;
} }
if (drvdata->nr_addr_cmp >= 1) { if (drvdata->nr_addr_cmp >= 1) {
drvdata->addr_val[0] = (unsigned long)_stext; config->addr_val[0] = (unsigned long)_stext;
drvdata->addr_val[1] = (unsigned long)_etext; config->addr_val[1] = (unsigned long)_etext;
drvdata->addr_type[0] = ETM_ADDR_TYPE_RANGE; config->addr_type[0] = ETM_ADDR_TYPE_RANGE;
drvdata->addr_type[1] = ETM_ADDR_TYPE_RANGE; config->addr_type[1] = ETM_ADDR_TYPE_RANGE;
} }
for (i = 0; i < drvdata->numcidc; i++) { for (i = 0; i < drvdata->numcidc; i++) {
drvdata->ctxid_pid[i] = 0x0; config->ctxid_pid[i] = 0x0;
drvdata->ctxid_vpid[i] = 0x0; config->ctxid_vpid[i] = 0x0;
} }
drvdata->ctxid_mask0 = 0x0; config->ctxid_mask0 = 0x0;
drvdata->ctxid_mask1 = 0x0; config->ctxid_mask1 = 0x0;
for (i = 0; i < drvdata->numvmidc; i++) for (i = 0; i < drvdata->numvmidc; i++)
drvdata->vmid_val[i] = 0x0; config->vmid_val[i] = 0x0;
drvdata->vmid_mask0 = 0x0; config->vmid_mask0 = 0x0;
drvdata->vmid_mask1 = 0x0; config->vmid_mask1 = 0x0;
/* /*
* A trace ID value of 0 is invalid, so let's start at some * A trace ID value of 0 is invalid, so let's start at some
......
...@@ -180,66 +180,19 @@ ...@@ -180,66 +180,19 @@
#define TRCSTATR_IDLE_BIT 0 #define TRCSTATR_IDLE_BIT 0
/** /**
* struct etm4_drvdata - specifics associated to an ETM component * struct etmv4_config - configuration information related to an ETMv4
* @base: Memory mapped base address for this component.
* @dev: The device entity associated to this component.
* @csdev: Component vitals needed by the framework.
* @spinlock: Only one at a time pls.
* @cpu: The cpu this component is affined to.
* @arch: ETM version number.
* @enable: Is this ETM currently tracing.
* @sticky_enable: true if ETM base configuration has been done.
* @boot_enable:True if we should start tracing at boot time.
* @os_unlock: True if access to management registers is allowed.
* @nr_pe: The number of processing entity available for tracing.
* @nr_pe_cmp: The number of processing entity comparator inputs that are
* available for tracing.
* @nr_addr_cmp:Number of pairs of address comparators available
* as found in ETMIDR4 0-3.
* @nr_cntr: Number of counters as found in ETMIDR5 bit 28-30.
* @nr_ext_inp: Number of external input.
* @numcidc: Number of contextID comparators.
* @numvmidc: Number of VMID comparators.
* @nrseqstate: The number of sequencer states that are implemented.
* @nr_event: Indicates how many events the trace unit support.
* @nr_resource:The number of resource selection pairs available for tracing.
* @nr_ss_cmp: Number of single-shot comparator controls that are available.
* @mode: Controls various modes supported by this ETM. * @mode: Controls various modes supported by this ETM.
* @trcid: value of the current ID for this component.
* @trcid_size: Indicates the trace ID width.
* @instrp0: Tracing of load and store instructions
* as P0 elements is supported.
* @trccond: If the trace unit supports conditional
* instruction tracing.
* @retstack: Indicates if the implementation supports a return stack.
* @trc_error: Whether a trace unit can trace a system
* error exception.
* @atbtrig: If the implementation can support ATB triggers
* @lpoverride: If the implementation can support low-power state over.
* @pe_sel: Controls which PE to trace. * @pe_sel: Controls which PE to trace.
* @cfg: Controls the tracing options. * @cfg: Controls the tracing options.
* @eventctrl0: Controls the tracing of arbitrary events. * @eventctrl0: Controls the tracing of arbitrary events.
* @eventctrl1: Controls the behavior of the events that @event_ctrl0 selects. * @eventctrl1: Controls the behavior of the events that @event_ctrl0 selects.
* @stallctl: If functionality that prevents trace unit buffer overflows * @stallctl: If functionality that prevents trace unit buffer overflows
* is available. * is available.
* @sysstall: Does the system support stall control of the PE?
* @nooverflow: Indicate if overflow prevention is supported.
* @stall_ctrl: Enables trace unit functionality that prevents trace
* unit buffer overflows.
* @ts_size: Global timestamp size field.
* @ts_ctrl: Controls the insertion of global timestamps in the * @ts_ctrl: Controls the insertion of global timestamps in the
* trace streams. * trace streams.
* @syncpr: Indicates if an implementation has a fixed
* synchronization period.
* @syncfreq: Controls how often trace synchronization requests occur. * @syncfreq: Controls how often trace synchronization requests occur.
* @trccci: Indicates if the trace unit supports cycle counting
* for instruction.
* @ccsize: Indicates the size of the cycle counter in bits.
* @ccitmin: minimum value that can be programmed in
* the TRCCCCTLR register. * the TRCCCCTLR register.
* @ccctlr: Sets the threshold value for cycle counting. * @ccctlr: Sets the threshold value for cycle counting.
* @trcbb: Indicates if the trace unit supports branch broadcast tracing.
* @q_support: Q element support characteristics.
* @vinst_ctrl: Controls instruction trace filtering. * @vinst_ctrl: Controls instruction trace filtering.
* @viiectlr: Set or read, the address range comparators. * @viiectlr: Set or read, the address range comparators.
* @vissctlr: Set, or read, the single address comparators that control the * @vissctlr: Set, or read, the single address comparators that control the
...@@ -264,73 +217,28 @@ ...@@ -264,73 +217,28 @@
* @addr_acc: Address comparator access type. * @addr_acc: Address comparator access type.
* @addr_type: Current status of the comparator register. * @addr_type: Current status of the comparator register.
* @ctxid_idx: Context ID index selector. * @ctxid_idx: Context ID index selector.
* @ctxid_size: Size of the context ID field to consider.
* @ctxid_pid: Value of the context ID comparator. * @ctxid_pid: Value of the context ID comparator.
* @ctxid_vpid: Virtual PID seen by users if PID namespace is enabled, otherwise * @ctxid_vpid: Virtual PID seen by users if PID namespace is enabled, otherwise
* the same value of ctxid_pid. * the same value of ctxid_pid.
* @ctxid_mask0:Context ID comparator mask for comparator 0-3. * @ctxid_mask0:Context ID comparator mask for comparator 0-3.
* @ctxid_mask1:Context ID comparator mask for comparator 4-7. * @ctxid_mask1:Context ID comparator mask for comparator 4-7.
* @vmid_idx: VM ID index selector. * @vmid_idx: VM ID index selector.
* @vmid_size: Size of the VM ID comparator to consider.
* @vmid_val: Value of the VM ID comparator. * @vmid_val: Value of the VM ID comparator.
* @vmid_mask0: VM ID comparator mask for comparator 0-3. * @vmid_mask0: VM ID comparator mask for comparator 0-3.
* @vmid_mask1: VM ID comparator mask for comparator 4-7. * @vmid_mask1: VM ID comparator mask for comparator 4-7.
* @s_ex_level: In secure state, indicates whether instruction tracing is
* supported for the corresponding Exception level.
* @ns_ex_level:In non-secure state, indicates whether instruction tracing is
* supported for the corresponding Exception level.
* @ext_inp: External input selection. * @ext_inp: External input selection.
*/ */
struct etmv4_drvdata { struct etmv4_config {
void __iomem *base;
struct device *dev;
struct coresight_device *csdev;
spinlock_t spinlock;
int cpu;
u8 arch;
bool enable;
bool sticky_enable;
bool boot_enable;
bool os_unlock;
u8 nr_pe;
u8 nr_pe_cmp;
u8 nr_addr_cmp;
u8 nr_cntr;
u8 nr_ext_inp;
u8 numcidc;
u8 numvmidc;
u8 nrseqstate;
u8 nr_event;
u8 nr_resource;
u8 nr_ss_cmp;
u32 mode; u32 mode;
u8 trcid;
u8 trcid_size;
bool instrp0;
bool trccond;
bool retstack;
bool trc_error;
bool atbtrig;
bool lpoverride;
u32 pe_sel; u32 pe_sel;
u32 cfg; u32 cfg;
u32 eventctrl0; u32 eventctrl0;
u32 eventctrl1; u32 eventctrl1;
bool stallctl;
bool sysstall;
bool nooverflow;
u32 stall_ctrl; u32 stall_ctrl;
u8 ts_size;
u32 ts_ctrl; u32 ts_ctrl;
bool syncpr;
u32 syncfreq; u32 syncfreq;
bool trccci;
u8 ccsize;
u8 ccitmin;
u32 ccctlr; u32 ccctlr;
bool trcbb;
u32 bb_ctrl; u32 bb_ctrl;
bool q_support;
u32 vinst_ctrl; u32 vinst_ctrl;
u32 viiectlr; u32 viiectlr;
u32 vissctlr; u32 vissctlr;
...@@ -353,19 +261,119 @@ struct etmv4_drvdata { ...@@ -353,19 +261,119 @@ struct etmv4_drvdata {
u64 addr_acc[ETM_MAX_SINGLE_ADDR_CMP]; u64 addr_acc[ETM_MAX_SINGLE_ADDR_CMP];
u8 addr_type[ETM_MAX_SINGLE_ADDR_CMP]; u8 addr_type[ETM_MAX_SINGLE_ADDR_CMP];
u8 ctxid_idx; u8 ctxid_idx;
u8 ctxid_size;
u64 ctxid_pid[ETMv4_MAX_CTXID_CMP]; u64 ctxid_pid[ETMv4_MAX_CTXID_CMP];
u64 ctxid_vpid[ETMv4_MAX_CTXID_CMP]; u64 ctxid_vpid[ETMv4_MAX_CTXID_CMP];
u32 ctxid_mask0; u32 ctxid_mask0;
u32 ctxid_mask1; u32 ctxid_mask1;
u8 vmid_idx; u8 vmid_idx;
u8 vmid_size;
u64 vmid_val[ETM_MAX_VMID_CMP]; u64 vmid_val[ETM_MAX_VMID_CMP];
u32 vmid_mask0; u32 vmid_mask0;
u32 vmid_mask1; u32 vmid_mask1;
u32 ext_inp;
};
/**
* struct etm4_drvdata - specifics associated to an ETM component
* @base: Memory mapped base address for this component.
* @dev: The device entity associated to this component.
* @csdev: Component vitals needed by the framework.
* @spinlock: Only one at a time pls.
* @cpu: The cpu this component is affined to.
* @arch: ETM version number.
* @nr_pe: The number of processing entity available for tracing.
* @nr_pe_cmp: The number of processing entity comparator inputs that are
* available for tracing.
* @nr_addr_cmp:Number of pairs of address comparators available
* as found in ETMIDR4 0-3.
* @nr_cntr: Number of counters as found in ETMIDR5 bit 28-30.
* @nr_ext_inp: Number of external input.
* @numcidc: Number of contextID comparators.
* @numvmidc: Number of VMID comparators.
* @nrseqstate: The number of sequencer states that are implemented.
* @nr_event: Indicates how many events the trace unit support.
* @nr_resource:The number of resource selection pairs available for tracing.
* @nr_ss_cmp: Number of single-shot comparator controls that are available.
* @trcid: value of the current ID for this component.
* @trcid_size: Indicates the trace ID width.
* @ts_size: Global timestamp size field.
* @ctxid_size: Size of the context ID field to consider.
* @vmid_size: Size of the VM ID comparator to consider.
* @ccsize: Indicates the size of the cycle counter in bits.
* @ccitmin: minimum value that can be programmed in
* @s_ex_level: In secure state, indicates whether instruction tracing is
* supported for the corresponding Exception level.
* @ns_ex_level:In non-secure state, indicates whether instruction tracing is
* supported for the corresponding Exception level.
* @enable: Is this ETM currently tracing.
* @sticky_enable: true if ETM base configuration has been done.
* @boot_enable:True if we should start tracing at boot time.
* @os_unlock: True if access to management registers is allowed.
* @instrp0: Tracing of load and store instructions
* as P0 elements is supported.
* @trcbb: Indicates if the trace unit supports branch broadcast tracing.
* @trccond: If the trace unit supports conditional
* instruction tracing.
* @retstack: Indicates if the implementation supports a return stack.
* @trccci: Indicates if the trace unit supports cycle counting
* for instruction.
* @q_support: Q element support characteristics.
* @trc_error: Whether a trace unit can trace a system
* error exception.
* @syncpr: Indicates if an implementation has a fixed
* synchronization period.
* @stall_ctrl: Enables trace unit functionality that prevents trace
* unit buffer overflows.
* @sysstall: Does the system support stall control of the PE?
* @nooverflow: Indicate if overflow prevention is supported.
* @atbtrig: If the implementation can support ATB triggers
* @lpoverride: If the implementation can support low-power state over.
* @config: structure holding configuration parameters.
*/
struct etmv4_drvdata {
void __iomem *base;
struct device *dev;
struct coresight_device *csdev;
spinlock_t spinlock;
int cpu;
u8 arch;
u8 nr_pe;
u8 nr_pe_cmp;
u8 nr_addr_cmp;
u8 nr_cntr;
u8 nr_ext_inp;
u8 numcidc;
u8 numvmidc;
u8 nrseqstate;
u8 nr_event;
u8 nr_resource;
u8 nr_ss_cmp;
u8 trcid;
u8 trcid_size;
u8 ts_size;
u8 ctxid_size;
u8 vmid_size;
u8 ccsize;
u8 ccitmin;
u8 s_ex_level; u8 s_ex_level;
u8 ns_ex_level; u8 ns_ex_level;
u32 ext_inp; bool enable;
bool sticky_enable;
bool boot_enable;
bool os_unlock;
bool instrp0;
bool trcbb;
bool trccond;
bool retstack;
bool trccci;
bool q_support;
bool trc_error;
bool syncpr;
bool stallctl;
bool sysstall;
bool nooverflow;
bool atbtrig;
bool lpoverride;
struct etmv4_config config;
}; };
/* Address comparator access types */ /* Address comparator access types */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment