powerpc/85xx: add P1020RDB-PD platform support

The p1020rdb-pd has the similar feature as the p1020rdb.
Therefore, p1020rdb-pd use the same platform file as the p1/p2 rdb board.
Overview of P1020RDB-PD platform:
- DDR3 2GB
- NOR flash 64MB
- NAND flash 128MB
- SPI flash 16MB
- I2C EEPROM 256Kb
	- eTSEC1 (RGMII PHY) connected to VSC7385 L2 switch
	- eTSEC2 (SGMII PHY)
- eTSEC3 (RGMII PHY)
	- SDHC
	- 2 USB ports
	- 4 TDM ports
	- PCIe
Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com>
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
CC: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

arch/powerpc/platforms/85xx/mpc85xx_rdb.c

@@ -160,6 +160,7 @@ machine_arch_initcall(p2020_rdb_pc, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1020_mbg_pc, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1020_rdb, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices);
+machine_arch_initcall(p1020_rdb_pd, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1020_utm_pc, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1025_rdb, mpc85xx_common_publish_devices);
@@ -193,6 +194,13 @@ static int __init p1020_rdb_pc_probe(void)
 	return of_flat_dt_is_compatible(root, "fsl,P1020RDB-PC");
 }
 
+static int __init p1020_rdb_pd_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,P1020RDB-PD");
+}
+
 static int __init p1021_rdb_pc_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
@@ -351,6 +359,20 @@ define_machine(p1020_rdb_pc) {
 	.progress		= udbg_progress,
 };
 
+define_machine(p1020_rdb_pd) {
+	.name			= "P1020RDB-PD",
+	.probe			= p1020_rdb_pd_probe,
+	.setup_arch		= mpc85xx_rdb_setup_arch,
+	.init_IRQ		= mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
+
 define_machine(p1024_rdb) {
 	.name			= "P1024 RDB",
 	.probe			= p1024_rdb_probe,