MIPS: Netlogic: update iomap.h for XLP9XX

Most IO block offsets have changed in XLP9XX. Update iomap.h to add the
new addresses of different SoC blocks like PIC, SYS, UART etc. that are
needed by the base code.

On XLP9xx, the SoC blocks of other nodes are seen on a PCI bus
corresponding to the node. Update iomap code to reflect this.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/6277/

arch/mips/include/asm/mach-netlogic/multi-node.h

@@ -59,6 +59,7 @@ struct nlm_soc_info {
 	uint64_t	picbase;	/* PIC block base */
 	spinlock_t	piclock;	/* lock for PIC access */
 	cpumask_t	cpumask;	/* logical cpu mask for node */
+	unsigned int	socbus;
 };
 
 extern struct nlm_soc_info nlm_nodes[NLM_NR_NODES];

arch/mips/include/asm/netlogic/xlp-hal/iomap.h

@@ -48,8 +48,10 @@
 #define XLP_IO_SIZE			(64 << 20)	/* ECFG space size */
 #define XLP_IO_PCI_HDRSZ		0x100
 #define XLP_IO_DEV(node, dev)		((dev) + (node) * 8)
-#define XLP_HDR_OFFSET(node, bus, dev, fn)	(((bus) << 20) | \
-				((XLP_IO_DEV(node, dev)) << 15) | ((fn) << 12))
+#define XLP_IO_PCI_OFFSET(b, d, f)	(((b) << 20) | ((d) << 15) | ((f) << 12))
+
+#define XLP_HDR_OFFSET(node, bus, dev, fn) \
+		XLP_IO_PCI_OFFSET(bus, XLP_IO_DEV(node, dev), fn)
 
 #define XLP_IO_BRIDGE_OFFSET(node)	XLP_HDR_OFFSET(node, 0, 0, 0)
 /* coherent inter chip */
@@ -109,6 +111,36 @@
 #define XLP_IO_MMC_OFFSET(node, slot)	\
 		((XLP_IO_SD_OFFSET(node))+(slot*0x100)+XLP_IO_PCI_HDRSZ)
 
+/* Things have changed drastically in XLP 9XX */
+#define XLP9XX_HDR_OFFSET(n, d, f)	\
+			XLP_IO_PCI_OFFSET(xlp9xx_get_socbus(n), d, f)
+
+#define XLP9XX_IO_BRIDGE_OFFSET(node)	XLP_IO_PCI_OFFSET(0, 0, node)
+#define XLP9XX_IO_PIC_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 2, 0)
+#define XLP9XX_IO_UART_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 2, 2)
+#define XLP9XX_IO_SYS_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 6, 0)
+#define XLP9XX_IO_FUSE_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 6, 1)
+#define XLP9XX_IO_JTAG_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 6, 4)
+
+#define XLP9XX_IO_PCIE_OFFSET(node, i)	XLP9XX_HDR_OFFSET(node, 1, i)
+#define XLP9XX_IO_PCIE0_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 1, 0)
+#define XLP9XX_IO_PCIE2_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 1, 2)
+#define XLP9XX_IO_PCIE3_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 1, 3)
+
+/* XLP9xx USB block */
+#define XLP9XX_IO_USB_OFFSET(node, i)		XLP9XX_HDR_OFFSET(node, 4, i)
+#define XLP9XX_IO_USB_XHCI0_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 4, 1)
+#define XLP9XX_IO_USB_XHCI1_OFFSET(node)	XLP9XX_HDR_OFFSET(node, 4, 2)
+
+/* XLP9XX on-chip SATA controller */
+#define XLP9XX_IO_SATA_OFFSET(node)		XLP9XX_HDR_OFFSET(node, 3, 2)
+
+#define XLP9XX_IO_NOR_OFFSET(node)		XLP9XX_HDR_OFFSET(node, 7, 0)
+#define XLP9XX_IO_NAND_OFFSET(node)		XLP9XX_HDR_OFFSET(node, 7, 1)
+#define XLP9XX_IO_SPI_OFFSET(node)		XLP9XX_HDR_OFFSET(node, 7, 2)
+/* SD flash */
+#define XLP9XX_IO_MMCSD_OFFSET(node)		XLP9XX_HDR_OFFSET(node, 7, 3)
+
 /* PCI config header register id's */
 #define XLP_PCI_CFGREG0			0x00
 #define XLP_PCI_CFGREG1			0x01
@@ -161,6 +193,15 @@
 #define nlm_read_pci_reg(b, r)		nlm_read_reg(b, r)
 #define nlm_write_pci_reg(b, r, v)	nlm_write_reg(b, r, v)
 
+static inline int xlp9xx_get_socbus(int node)
+{
+	uint64_t socbridge;
+
+	if (node == 0)
+		return 1;
+	socbridge = nlm_pcicfg_base(XLP9XX_IO_BRIDGE_OFFSET(node));
+	return (nlm_read_pci_reg(socbridge, 0x6) >> 8) & 0xff;
+}
 #endif /* !__ASSEMBLY */
 
 #endif /* __NLM_HAL_IOMAP_H__ */

arch/mips/netlogic/xlp/nlm_hal.c

@@ -57,6 +57,10 @@ void nlm_node_init(int node)
 	nodep->sysbase = nlm_get_sys_regbase(node);
 	nodep->picbase = nlm_get_pic_regbase(node);
 	nodep->ebase = read_c0_ebase() & (~((1 << 12) - 1));
+	if (cpu_is_xlp9xx())
+		nodep->socbus = xlp9xx_get_socbus(node);
+	else
+		nodep->socbus = 0;
 	spin_lock_init(&nodep->piclock);
 }