Merge tag 'samsung-soc-4.8-2' of...

Merge tag 'samsung-soc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc

Samsung mach/soc update for v4.8, part 2:
1. Endian-friendly fixes.
2. Maintainers update.

* tag 'samsung-soc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  MAINTAINERS: Extend Samsung SoC entry with S3C/S5P drivers
  ARM: SAMSUNG: Fix missing s5p_init_cpu() declaration
  ARM: EXYNOS: Fix UART address selection for DEBUG_LL
  ARM: EXYNOS: Fixup for __raw operations in suspend.c
  ARM: SAMSUNG: Fixup usage of __raw IO in PM
  ARM: EXYNOS: Fixup endian in pm/pmu
  ARM: EXYNOS: Fixups for big-endian operation
  ARM: SAMSUNG: Fixup endian issues in CPU detection
  ARM: EXYNOS: Fixup debug macros for big-endian
  ARM: s3c24xx: Sort cpufreq tables
  ARM: SAMSUNG: Fix typos
Signed-off-by: Olof Johansson <olof@lixom.net>

MAINTAINERS

@@ -1598,8 +1598,10 @@ F:	arch/arm/mach-s3c24*/
 F:	arch/arm/mach-s3c64xx/
 F:	arch/arm/mach-s5p*/
 F:	arch/arm/mach-exynos*/
-F:	drivers/*/*s3c2410*
-F:	drivers/*/*/*s3c2410*
+F:	drivers/*/*s3c24*
+F:	drivers/*/*/*s3c24*
+F:	drivers/*/*s3c64xx*
+F:	drivers/*/*s5pv210*
 F:	drivers/memory/samsung/*
 F:	drivers/soc/samsung/*
 F:	drivers/spi/spi-s3c*

arch/arm/include/debug/exynos.S

@@ -24,7 +24,11 @@
 		mrc	p15, 0, \tmp, c0, c0, 0
 		and	\tmp, \tmp, #0xf0
 		teq	\tmp, #0xf0		@@ A15
-		ldreq	\rp, =EXYNOS5_PA_UART
+		beq	100f
+		mrc	p15, 0, \tmp, c0, c0, 5
+		and	\tmp, \tmp, #0xf00
+		teq	\tmp, #0x100		@@ A15 + A7 but boot to A7
+100:		ldreq	\rp, =EXYNOS5_PA_UART
 		movne	\rp, #EXYNOS4_PA_UART	@@ EXYNOS4
 		ldr	\rv, =S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0

arch/arm/include/debug/samsung.S

@@ -15,11 +15,13 @@
 
 	.macro fifo_level_s5pv210 rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
 		and	\rd, \rd, #S5PV210_UFSTAT_TXMASK
 	.endm
 
 	.macro  fifo_full_s5pv210 rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S5PV210_UFSTAT_TXFULL
 	.endm
 
@@ -28,6 +30,7 @@
 
 	.macro fifo_level_s3c2440 rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
 		and	\rd, \rd, #S3C2440_UFSTAT_TXMASK
 	.endm
 
@@ -37,6 +40,7 @@
 
 	.macro  fifo_full_s3c2440 rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2440_UFSTAT_TXFULL
 	.endm
 
@@ -50,6 +54,7 @@
 
 	.macro	busyuart, rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFCON]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
 		beq	1001f				@
 		@ FIFO enabled...
@@ -61,6 +66,7 @@
 1001:
 		@ busy waiting for non fifo
 		ldr	\rd, [\rx, # S3C2410_UTRSTAT]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2410_UTRSTAT_TXFE
 		beq	1001b
 
@@ -69,6 +75,7 @@
 
 	.macro	waituart,rd,rx
 		ldr	\rd, [\rx, # S3C2410_UFCON]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
 		beq	1001f				@
 		@ FIFO enabled...
@@ -80,6 +87,7 @@
 1001:
 		@ idle waiting for non fifo
 		ldr	\rd, [\rx, # S3C2410_UTRSTAT]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2410_UTRSTAT_TXFE
 		beq	1001b
 

arch/arm/mach-exynos/common.h

@@ -166,7 +166,6 @@ extern struct cpuidle_exynos_data cpuidle_coupled_exynos_data;
 
 extern void exynos_set_delayed_reset_assertion(bool enable);
 
-extern void s5p_init_cpu(void __iomem *cpuid_addr);
 extern unsigned int samsung_rev(void);
 extern void exynos_core_restart(u32 core_id);
 extern int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr);
@@ -174,12 +173,12 @@ extern int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr);
 
 static inline void pmu_raw_writel(u32 val, u32 offset)
 {
-	__raw_writel(val, pmu_base_addr + offset);
+	writel_relaxed(val, pmu_base_addr + offset);
 }
 
 static inline u32 pmu_raw_readl(u32 offset)
 {
-	return __raw_readl(pmu_base_addr + offset);
+	return readl_relaxed(pmu_base_addr + offset);
 }
 
 #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */

arch/arm/mach-exynos/exynos.c

@@ -25,6 +25,7 @@
 #include <asm/mach/map.h>
 
 #include <mach/map.h>
+#include <plat/cpu.h>
 
 #include "common.h"
 #include "mfc.h"

arch/arm/mach-exynos/firmware.c

@@ -41,9 +41,9 @@ static int exynos_do_idle(unsigned long mode)
 	case FW_DO_IDLE_AFTR:
 		if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
 			exynos_save_cp15();
-		__raw_writel(virt_to_phys(exynos_cpu_resume_ns),
-			     sysram_ns_base_addr + 0x24);
-		__raw_writel(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20);
+		writel_relaxed(virt_to_phys(exynos_cpu_resume_ns),
+			       sysram_ns_base_addr + 0x24);
+		writel_relaxed(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20);
 		if (soc_is_exynos3250()) {
 			flush_cache_all();
 			exynos_smc(SMC_CMD_SAVE, OP_TYPE_CORE,
@@ -97,7 +97,7 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
 	if (soc_is_exynos4412())
 		boot_reg += 4 * cpu;
 
-	__raw_writel(boot_addr, boot_reg);
+	writel_relaxed(boot_addr, boot_reg);
 	return 0;
 }
 
@@ -113,7 +113,7 @@ static int exynos_get_cpu_boot_addr(int cpu, unsigned long *boot_addr)
 	if (soc_is_exynos4412())
 		boot_reg += 4 * cpu;
 
-	*boot_addr = __raw_readl(boot_reg);
+	*boot_addr = readl_relaxed(boot_reg);
 	return 0;
 }
 
@@ -234,20 +234,20 @@ void exynos_set_boot_flag(unsigned int cpu, unsigned int mode)
 {
 	unsigned int tmp;
 
-	tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4);
+	tmp = readl_relaxed(REG_CPU_STATE_ADDR + cpu * 4);
 
 	if (mode & BOOT_MODE_MASK)
 		tmp &= ~BOOT_MODE_MASK;
 
 	tmp |= mode;
-	__raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4);
+	writel_relaxed(tmp, REG_CPU_STATE_ADDR + cpu * 4);
 }
 
 void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode)
 {
 	unsigned int tmp;
 
-	tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4);
+	tmp = readl_relaxed(REG_CPU_STATE_ADDR + cpu * 4);
 	tmp &= ~mode;
-	__raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4);
+	writel_relaxed(tmp, REG_CPU_STATE_ADDR + cpu * 4);
 }

arch/arm/mach-exynos/headsmp.S

@@ -12,12 +12,15 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
+#include <asm/assembler.h>
+
 /*
  * exynos4 specific entry point for secondary CPUs.  This provides
  * a "holding pen" into which all secondary cores are held until we're
  * ready for them to initialise.
  */
 ENTRY(exynos4_secondary_startup)
+ARM_BE8(setend	be)
 	mrc	p15, 0, r0, c0, c0, 5
 	and	r0, r0, #15
 	adr	r4, 1f

arch/arm/mach-exynos/platsmp.c

@@ -264,7 +264,7 @@ int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr)
 			ret = PTR_ERR(boot_reg);
 			goto fail;
 		}
-		__raw_writel(boot_addr, boot_reg);
+		writel_relaxed(boot_addr, boot_reg);
 		ret = 0;
 	}
 fail:
@@ -289,7 +289,7 @@ int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr)
 			ret = PTR_ERR(boot_reg);
 			goto fail;
 		}
-		*boot_addr = __raw_readl(boot_reg);
+		*boot_addr = readl_relaxed(boot_reg);
 		ret = 0;
 	}
 fail:

arch/arm/mach-exynos/pm.c

@@ -132,9 +132,9 @@ static void exynos_set_wakeupmask(long mask)
 
 static void exynos_cpu_set_boot_vector(long flags)
 {
-	__raw_writel(virt_to_phys(exynos_cpu_resume),
-		     exynos_boot_vector_addr());
-	__raw_writel(flags, exynos_boot_vector_flag());
+	writel_relaxed(virt_to_phys(exynos_cpu_resume),
+		       exynos_boot_vector_addr());
+	writel_relaxed(flags, exynos_boot_vector_flag());
 }
 
 static int exynos_aftr_finisher(unsigned long flags)

arch/arm/mach-exynos/pm_domains.c

@@ -70,12 +70,12 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
 	}
 
 	pwr = power_on ? INT_LOCAL_PWR_EN : 0;
-	__raw_writel(pwr, base);
+	writel_relaxed(pwr, base);
 
 	/* Wait max 1ms */
 	timeout = 10;
 
-	while ((__raw_readl(base + 0x4) & INT_LOCAL_PWR_EN) != pwr) {
+	while ((readl_relaxed(base + 0x4) & INT_LOCAL_PWR_EN) != pwr) {
 		if (!timeout) {
 			op = (power_on) ? "enable" : "disable";
 			pr_err("Power domain %s %s failed\n", domain->name, op);
@@ -185,7 +185,7 @@ static __init int exynos4_pm_init_power_domain(void)
 			clk_put(pd->oscclk);
 
 no_clk:
-		on = __raw_readl(pd->base + 0x4) & INT_LOCAL_PWR_EN;
+		on = readl_relaxed(pd->base + 0x4) & INT_LOCAL_PWR_EN;
 
 		pm_genpd_init(&pd->pd, NULL, !on);
 		of_genpd_add_provider_simple(np, &pd->pd);

arch/arm/mach-exynos/suspend.c

@@ -301,7 +301,7 @@ static int exynos5420_cpu_suspend(unsigned long arg)
 	unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
 	unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
 
-	__raw_writel(0x0, sysram_base_addr + EXYNOS5420_CPU_STATE);
+	writel_relaxed(0x0, sysram_base_addr + EXYNOS5420_CPU_STATE);
 
 	if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) {
 		mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume);
@@ -373,8 +373,8 @@ static void exynos5420_pm_prepare(void)
 	 * needs to restore it back in case, the primary cpu fails to
 	 * suspend for any reason.
 	 */
-	exynos5420_cpu_state = __raw_readl(sysram_base_addr +
-						EXYNOS5420_CPU_STATE);
+	exynos5420_cpu_state = readl_relaxed(sysram_base_addr +
+					     EXYNOS5420_CPU_STATE);
 
 	exynos_pm_enter_sleep_mode();
 
@@ -504,11 +504,11 @@ static void exynos5420_pm_resume(void)
 	/* Restore the CPU0 low power state register */
 	tmp = pmu_raw_readl(EXYNOS5_ARM_CORE0_SYS_PWR_REG);
 	pmu_raw_writel(tmp | S5P_CORE_LOCAL_PWR_EN,
-		EXYNOS5_ARM_CORE0_SYS_PWR_REG);
+		       EXYNOS5_ARM_CORE0_SYS_PWR_REG);
 
 	/* Restore the sysram cpu state register */
-	__raw_writel(exynos5420_cpu_state,
-		sysram_base_addr + EXYNOS5420_CPU_STATE);
+	writel_relaxed(exynos5420_cpu_state,
+		       sysram_base_addr + EXYNOS5420_CPU_STATE);
 
 	pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL,
 			S5P_CENTRAL_SEQ_OPTION);

arch/arm/mach-s3c24xx/include/mach/regs-gpio.h

@@ -520,7 +520,7 @@
 #define S3C24XX_EXTINT1	   S3C24XX_GPIOREG2(0x8C)
 #define S3C24XX_EXTINT2	   S3C24XX_GPIOREG2(0x90)
 
-/* interrupt filtering conrrol for EINT16..EINT23 */
+/* interrupt filtering control for EINT16..EINT23 */
 #define S3C2410_EINFLT0	   S3C2410_GPIOREG(0x94)
 #define S3C2410_EINFLT1	   S3C2410_GPIOREG(0x98)
 #define S3C2410_EINFLT2	   S3C2410_GPIOREG(0x9C)

arch/arm/mach-s3c24xx/iotiming-s3c2410.c

@@ -423,7 +423,7 @@ void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
  * @timings: The IO timing information to fill out.
  *
  * Calculate the @timings timing information from the current frequency
- * information in @cfg, and the new frequency configur
+ * information in @cfg, and the new frequency configuration
  * through all the IO banks, reading the state and then updating @iot
  * as necessary.
  *

arch/arm/mach-s3c24xx/mach-n30.c

@@ -522,7 +522,7 @@ static void __init n30_hwinit(void)
 	 *
 	 * The pull ups for H6/H7 are enabled on N30 but not on the
 	 * N35/PiN.  I suppose is useful for a budget model of the N30
-	 * with no bluetooh.  It doesn't hurt to have the pull ups
+	 * with no bluetooth.  It doesn't hurt to have the pull ups
 	 * enabled on the N35, so leave them enabled for all models.
 	 */
 	__raw_writel(0x0028aaaa, S3C2410_GPHCON);

arch/arm/mach-s3c24xx/mach-osiris-dvs.c

@@ -143,7 +143,7 @@ static int osiris_dvs_remove(struct platform_device *pdev)
 	return 0;
 }
 
-/* the CONFIG_PM block is so small, it isn't worth actaully compiling it
+/* the CONFIG_PM block is so small, it isn't worth actually compiling it
  * out if the configuration isn't set. */
 
 static int osiris_dvs_suspend(struct device *dev)

arch/arm/mach-s3c24xx/pll-s3c2410.c

@@ -32,11 +32,12 @@
 #include <plat/cpu.h>
 #include <plat/cpu-freq-core.h>
 
+/* This array should be sorted in ascending order of the frequencies */
 static struct cpufreq_frequency_table pll_vals_12MHz[] = {
     { .frequency = 34000000,  .driver_data = PLLVAL(82, 2, 3),   },
     { .frequency = 45000000,  .driver_data = PLLVAL(82, 1, 3),   },
-    { .frequency = 51000000,  .driver_data = PLLVAL(161, 3, 3),  },
     { .frequency = 48000000,  .driver_data = PLLVAL(120, 2, 3),  },
+    { .frequency = 51000000,  .driver_data = PLLVAL(161, 3, 3),  },
     { .frequency = 56000000,  .driver_data = PLLVAL(142, 2, 3),  },
     { .frequency = 68000000,  .driver_data = PLLVAL(82, 2, 2),   },
     { .frequency = 79000000,  .driver_data = PLLVAL(71, 1, 2),   },

arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c

@@ -20,6 +20,7 @@
 #include <plat/cpu.h>
 #include <plat/cpu-freq-core.h>
 
+/* This array should be sorted in ascending order of the frequencies */
 static struct cpufreq_frequency_table s3c2440_plls_12[] = {
 	{ .frequency = 75000000,	.driver_data = PLLVAL(0x75, 3, 3),  }, 	/* FVco 600.000000 */
 	{ .frequency = 80000000,	.driver_data = PLLVAL(0x98, 4, 3),  }, 	/* FVco 640.000000 */

arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c

@@ -20,6 +20,7 @@
 #include <plat/cpu.h>
 #include <plat/cpu-freq-core.h>
 
+/* This array should be sorted in ascending order of the frequencies */
 static struct cpufreq_frequency_table s3c2440_plls_169344[] = {
 	{ .frequency = 78019200,	.driver_data = PLLVAL(121, 5, 3), 	}, 	/* FVco 624.153600 */
 	{ .frequency = 84067200,	.driver_data = PLLVAL(131, 5, 3), 	}, 	/* FVco 672.537600 */

arch/arm/mach-s3c64xx/include/mach/map.h

@@ -99,7 +99,7 @@
 
 #define S3C64XX_PA_USB_HSPHY	(0x7C100000)
 
-/* compatibiltiy defines. */
+/* compatibility defines. */
 #define S3C_PA_TIMER		S3C64XX_PA_TIMER
 #define S3C_PA_HSMMC0		S3C64XX_PA_HSMMC0
 #define S3C_PA_HSMMC1		S3C64XX_PA_HSMMC1

arch/arm/plat-samsung/cpu.c

@@ -29,14 +29,14 @@ EXPORT_SYMBOL(samsung_rev);
 
 void __init s3c64xx_init_cpu(void)
 {
-	samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118);
+	samsung_cpu_id = readl_relaxed(S3C_VA_SYS + 0x118);
 	if (!samsung_cpu_id) {
 		/*
 		 * S3C6400 has the ID register in a different place,
 		 * and needs a write before it can be read.
 		 */
-		__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
-		samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0xA1C);
+		writel_relaxed(0x0, S3C_VA_SYS + 0xA1C);
+		samsung_cpu_id = readl_relaxed(S3C_VA_SYS + 0xA1C);
 	}
 
 	samsung_cpu_rev = 0;
@@ -46,7 +46,7 @@ void __init s3c64xx_init_cpu(void)
 
 void __init s5p_init_cpu(void __iomem *cpuid_addr)
 {
-	samsung_cpu_id = __raw_readl(cpuid_addr);
+	samsung_cpu_id = readl_relaxed(cpuid_addr);
 	samsung_cpu_rev = samsung_cpu_id & 0xFF;
 
 	pr_info("Samsung CPU ID: 0x%08lx\n", samsung_cpu_id);

arch/arm/plat-samsung/include/plat/cpu-freq-core.h

@@ -39,7 +39,7 @@ struct s3c2410_iobank_timing {
 	unsigned int	tacs;
 	unsigned int	tcos;
 	unsigned int	tacc;
-	unsigned int	tcoh;		/* nCS hold afrer nOE/nWE */
+	unsigned int	tcoh;		/* nCS hold after nOE/nWE */
 	unsigned int	tcah;		/* Address hold after nCS */
 	unsigned char	nwait_en;	/* nWait enabled for bank. */
 };

arch/arm/plat-samsung/include/plat/cpu.h

@@ -113,6 +113,7 @@ extern void s3c_init_cpu(unsigned long idcode,
 extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
 
 extern void s3c64xx_init_cpu(void);
+extern void s5p_init_cpu(void __iomem *cpuid_addr);
 
 extern unsigned int samsung_rev(void);
 

arch/arm/plat-samsung/include/plat/fb-s3c2410.h

@@ -48,7 +48,7 @@ struct s3c2410fb_display {
 
 struct s3c2410fb_mach_info {
 
-	struct s3c2410fb_display *displays;	/* attached diplays info */
+	struct s3c2410fb_display *displays;	/* attached displays info */
 	unsigned num_displays;			/* number of defined displays */
 	unsigned default_display;
 

arch/arm/plat-samsung/include/plat/gpio-cfg.h

@@ -35,7 +35,7 @@ struct samsung_gpio_chip;
  * struct samsung_gpio_cfg GPIO configuration
  * @cfg_eint: Configuration setting when used for external interrupt source
  * @get_pull: Read the current pull configuration for the GPIO
- * @set_pull: Set the current pull configuraiton for the GPIO
+ * @set_pull: Set the current pull configuration for the GPIO
  * @set_config: Set the current configuration for the GPIO
  * @get_config: Read the current configuration for the GPIO
  *

arch/arm/plat-samsung/pm-check.c

@@ -5,7 +5,7 @@
  *	http://armlinux.simtec.co.uk
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * S3C Power Mangament - suspend/resume memory corruptiuon check.
+ * S3C Power Mangament - suspend/resume memory corruption check.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as

arch/arm/plat-samsung/pm-common.c

@@ -31,7 +31,7 @@
 void s3c_pm_do_save(struct sleep_save *ptr, int count)
 {
 	for (; count > 0; count--, ptr++) {
-		ptr->val = __raw_readl(ptr->reg);
+		ptr->val = readl_relaxed(ptr->reg);
 		S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
 	}
 }
@@ -51,9 +51,9 @@ void s3c_pm_do_restore(const struct sleep_save *ptr, int count)
 {
 	for (; count > 0; count--, ptr++) {
 		pr_debug("restore %p (restore %08lx, was %08x)\n",
-				ptr->reg, ptr->val, __raw_readl(ptr->reg));
+				ptr->reg, ptr->val, readl_relaxed(ptr->reg));
 
-		__raw_writel(ptr->val, ptr->reg);
+		writel_relaxed(ptr->val, ptr->reg);
 	}
 }
 
@@ -71,5 +71,5 @@ void s3c_pm_do_restore(const struct sleep_save *ptr, int count)
 void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count)
 {
 	for (; count > 0; count--, ptr++)
-		__raw_writel(ptr->val, ptr->reg);
+		writel_relaxed(ptr->val, ptr->reg);
 }

arch/arm/plat-samsung/watchdog-reset.c

@@ -3,7 +3,7 @@
  * Copyright (c) 2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Coyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
+ * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com>
  *
  * Watchdog reset support for Samsung SoCs.
  *