Commit 5550e8e9 authored by Marek Vasut's avatar Marek Vasut Committed by Shawn Guo

ARM: dts: mxs: Add muxing options for the SSP2 MMC

Add pinmux for 4-bit SD card connected to SSP2.
Signed-off-by: default avatarMarek Vasut <marex@denx.de>
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent 931398ec
...@@ -473,6 +473,37 @@ MX28_PAD_SSP0_SCK__SSP0_SCK ...@@ -473,6 +473,37 @@ MX28_PAD_SSP0_SCK__SSP0_SCK
fsl,pull-up = <MXS_PULL_DISABLE>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
mmc2_4bit_pins_a: mmc2-4bit@0 {
reg = <0>;
fsl,pinmux-ids = <
MX28_PAD_SSP0_DATA4__SSP2_D0
MX28_PAD_SSP1_SCK__SSP2_D1
MX28_PAD_SSP1_CMD__SSP2_D2
MX28_PAD_SSP0_DATA5__SSP2_D3
MX28_PAD_SSP0_DATA6__SSP2_CMD
MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
MX28_PAD_SSP0_DATA7__SSP2_SCK
>;
fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <MXS_PULL_ENABLE>;
};
mmc2_cd_cfg: mmc2-cd-cfg {
fsl,pinmux-ids = <
MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
>;
fsl,pull-up = <MXS_PULL_DISABLE>;
};
mmc2_sck_cfg: mmc2-sck-cfg {
fsl,pinmux-ids = <
MX28_PAD_SSP0_DATA7__SSP2_SCK
>;
fsl,drive-strength = <MXS_DRIVE_12mA>;
fsl,pull-up = <MXS_PULL_DISABLE>;
};
i2c0_pins_a: i2c0@0 { i2c0_pins_a: i2c0@0 {
reg = <0>; reg = <0>;
fsl,pinmux-ids = < fsl,pinmux-ids = <
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment