Commit 55ab9756 authored by Linus Torvalds's avatar Linus Torvalds

Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  PCI: Fix warning message in PCIE port driver
  PCI: Stop unhiding the SMBus on Toshiba laptops
  PCI: Fix up PCI power management doc
  pci: set pci=bfsort for PowerEdge R900
parents 04a39523 bf5b4ba3
......@@ -102,31 +102,28 @@ pci_save_state
--------------
Usage:
pci_save_state(dev, buffer);
pci_save_state(struct pci_dev *dev);
Description:
Save first 64 bytes of PCI config space. Buffer must be allocated by
caller.
Save first 64 bytes of PCI config space, along with any additional
PCI-Express or PCI-X information.
pci_restore_state
-----------------
Usage:
pci_restore_state(dev, buffer);
pci_restore_state(struct pci_dev *dev);
Description:
Restore previously saved config space. (First 64 bytes only);
If buffer is NULL, then restore what information we know about the
device from bootup: BARs and interrupt line.
Restore previously saved config space.
pci_set_power_state
-------------------
Usage:
pci_set_power_state(dev, state);
pci_set_power_state(struct pci_dev *dev, pci_power_t state);
Description:
Transition device to low power state using PCI PM Capabilities
......@@ -142,7 +139,7 @@ pci_enable_wake
---------------
Usage:
pci_enable_wake(dev, state, enable);
pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable);
Description:
Enable device to generate PME# during low power state using PCI PM
......
......@@ -191,6 +191,14 @@ static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"),
},
},
{
.callback = set_bf_sort,
.ident = "Dell PowerEdge R900",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R900"),
},
},
{
.callback = set_bf_sort,
.ident = "HP ProLiant BL20p G3",
......
......@@ -93,7 +93,7 @@ static int __devinit pcie_portdrv_probe (struct pci_dev *dev,
if (!dev->irq && dev->pin) {
printk(KERN_WARNING
"%s->Dev[%04x:%04x] has invalid IRQ. Check vendor BIOS\n",
__FUNCTION__, dev->device, dev->vendor);
__FUNCTION__, dev->vendor, dev->device);
}
if (pcie_port_device_register(dev)) {
pci_disable_device(dev);
......
......@@ -963,6 +963,13 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, k8t_sound_ho
* bridge. Unfortunately, this device has no subvendor/subdevice ID. So it
* becomes necessary to do this tweak in two steps -- I've chosen the Host
* bridge as trigger.
*
* Note that we used to unhide the SMBus that way on Toshiba laptops
* (Satellite A40 and Tecra M2) but then found that the thermal management
* was done by SMM code, which could cause unsynchronized concurrent
* accesses to the SMBus registers, with potentially bad effects. Thus you
* should be very careful when adding new entries: if SMM is accessing the
* Intel SMBus, this is a very good reason to leave it hidden.
*/
static int asus_hides_smbus;
......@@ -1040,17 +1047,6 @@ static void __init asus_hides_smbus_hostbridge(struct pci_dev *dev)
case 0x099c: /* HP Compaq nx6110 */
asus_hides_smbus = 1;
}
} else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_TOSHIBA)) {
if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB)
switch(dev->subsystem_device) {
case 0x0001: /* Toshiba Satellite A40 */
asus_hides_smbus = 1;
}
else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
switch(dev->subsystem_device) {
case 0x0001: /* Toshiba Tecra M2 */
asus_hides_smbus = 1;
}
} else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) {
if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
switch(dev->subsystem_device) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment