serial: sunsab: remove trailing whitespaces

Fix coding style. No functional changes.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231030212240.975885-1-hugo@hugovil.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/sunsab.c

@@ -443,7 +443,7 @@ static void sunsab_start_tx(struct uart_port *port)
 
 	up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
 	writeb(up->interrupt_mask1, &up->regs->w.imr1);
-	
+
 	if (!test_bit(SAB82532_XPR, &up->irqflags))
 		return;
 
@@ -549,7 +549,7 @@ static int sunsab_startup(struct uart_port *port)
 	(void) readb(&up->regs->r.isr1);
 
 	/*
-	 * Now, initialize the UART 
+	 * Now, initialize the UART
 	 */
 	writeb(0, &up->regs->w.ccr0);				/* power-down */
 	writeb(SAB82532_CCR0_MCE | SAB82532_CCR0_SC_NRZ |
@@ -563,7 +563,7 @@ static int sunsab_startup(struct uart_port *port)
 			   SAB82532_MODE_RAC);
 	writeb(up->cached_mode, &up->regs->w.mode);
 	writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc);
-	
+
 	tmp = readb(&up->regs->rw.ccr0);
 	tmp |= SAB82532_CCR0_PU;	/* power-up */
 	writeb(tmp, &up->regs->rw.ccr0);
@@ -607,7 +607,7 @@ static void sunsab_shutdown(struct uart_port *port)
 	up->cached_dafo &= ~SAB82532_DAFO_XBRK;
 	writeb(up->cached_dafo, &up->regs->rw.dafo);
 
-	/* Disable Receiver */	
+	/* Disable Receiver */
 	up->cached_mode &= ~SAB82532_MODE_RAC;
 	writeb(up->cached_mode, &up->regs->rw.mode);
 
@@ -622,7 +622,7 @@ static void sunsab_shutdown(struct uart_port *port)
 	 * speed the chip was configured for when the port was open).
 	 */
 #if 0
-	/* Power Down */	
+	/* Power Down */
 	tmp = readb(&up->regs->rw.ccr0);
 	tmp &= ~SAB82532_CCR0_PU;
 	writeb(tmp, &up->regs->rw.ccr0);
@@ -649,7 +649,7 @@ static void calc_ebrg(int baud, int *n_ret, int *m_ret)
 		*m_ret = 0;
 		return;
 	}
-     
+
 	/*
 	 * We scale numbers by 10 so that we get better accuracy
 	 * without having to use floating point.  Here we increment m
@@ -788,7 +788,7 @@ static const char *sunsab_type(struct uart_port *port)
 {
 	struct uart_sunsab_port *up = (void *)port;
 	static char buf[36];
-	
+
 	sprintf(buf, "SAB82532 %s", sab82532_version[up->type]);
 	return buf;
 }
@@ -933,7 +933,7 @@ static int sunsab_console_setup(struct console *con, char *options)
 	sunsab_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
 
 	uart_port_unlock_irqrestore(&up->port, flags);
-	
+
 	return 0;
 }