Merge tag 'v4.2-next-dts' of https://github.com/mbgg/linux-mediatek into next/dt

- ARM: dts: mediatek: add mt6580 basic support
- Document: DT: Add bindings for mediatek MT6580 SoC Platform
- ARM: dts: mediatek mt8135: Use real UART clocks
- ARM: dts: mt8135-evbp1: Add PMIC support
- ARM: dts: mt8135: Add pmic wrapper nodes
- ARM: dts: mediatek: Enable clock support for Mediatek MT8135.

* tag 'v4.2-next-dts' of https://github.com/mbgg/linux-mediatek:
  ARM: dts: mediatek: add mt6580 basic support
  Document: DT: Add bindings for mediatek MT6580 SoC Platform
  ARM: dts: mediatek mt8135: Use real UART clocks
  ARM: dts: mt8135-evbp1: Add PMIC support
  ARM: dts: mt8135: Add pmic wrapper nodes
  ARM: dts: mediatek: Enable clock support for Mediatek MT8135.
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/mediatek.txt

@@ -5,6 +5,7 @@ Boards with a MediaTek mt65xx/mt81xx SoC shall have the following property:
 Required root node property:
 
 compatible: Must contain one of
+   "mediatek,mt6580"
    "mediatek,mt6589"
    "mediatek,mt6592"
    "mediatek,mt8127"
@@ -14,6 +15,9 @@ compatible: Must contain one of
 
 Supported boards:
 
+- Evaluation board for MT6580:
+    Required root node properties:
+      - compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
 - bq Aquaris5 smart phone:
     Required root node properties:
       - compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589";

Documentation/devicetree/bindings/arm/mediatek/mediatek,sysirq.txt

@@ -11,6 +11,7 @@ Required properties:
 	"mediatek,mt6592-sysirq"
 	"mediatek,mt6589-sysirq"
 	"mediatek,mt6582-sysirq"
+	"mediatek,mt6580-sysirq"
 	"mediatek,mt6577-sysirq"
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Use the same format as specified by GIC in

Documentation/devicetree/bindings/serial/mtk-uart.txt

@@ -7,8 +7,9 @@ Required properties:
   * "mediatek,mt8173-uart" for MT8173 compatible UARTS
   * "mediatek,mt6589-uart" for MT6589 compatible UARTS
   * "mediatek,mt6582-uart" for MT6582 compatible UARTS
+  * "mediatek,mt6580-uart" for MT6580 compatible UARTS
   * "mediatek,mt6577-uart" for all compatible UARTS (MT8173, MT6589, MT6582, 
-	MT6577)
+	MT6580, MT6577)
 
 - reg: The base address of the UART register bank.
 

Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt

@@ -2,7 +2,11 @@ Mediatek MT6577, MT6572 and MT6589 Timers
 ---------------------------------------
 
 Required properties:
-- compatible: Should be "mediatek,mt6577-timer"
+- compatible should contain:
+	* "mediatek,mt6589-timer" for MT6589 compatible timers
+	* "mediatek,mt6580-timer" for MT6580 compatible timers
+	* "mediatek,mt6577-timer" for all compatible timers (MT6589, MT6580,
+		MT6577)
 - reg: Should contain location and length for timers register.
 - clocks: Clocks driving the timer hardware. This list should include two
 	clocks. The order is system clock and as second clock the RTC clock.

arch/arm/boot/dts/Makefile

@@ -721,6 +721,7 @@ dtb-$(CONFIG_MACH_DOVE) += \
 	dove-dove-db.dtb \
 	dove-sbc-a510.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += \
+	mt6580-evbp1.dtb \
 	mt6589-aquaris5.dtb \
 	mt6592-evb.dtb \
 	mt8127-moose.dtb \

arch/arm/boot/dts/mt6580-evbp1.dts

+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt6580.dtsi"
+
+/ {
+	model = "MediaTek MT6580 evaluation board";
+	compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};

arch/arm/boot/dts/mt6580.dtsi

+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "mediatek,mt6580";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+		#clock-cells = <0>;
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer: timer@10008000 {
+		compatible = "mediatek,mt6580-timer",
+			     "mediatek,mt6577-timer";
+		reg = <0x10008000 0x80>;
+		interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc_clk>;
+		clock-names = "system-clk", "rtc-clk";
+	};
+
+	sysirq: interrupt-controller@10200100 {
+		compatible = "mediatek,mt6580-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10200100 0x1c>;
+	};
+
+	gic: interrupt-controller@10211000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10211000 0x1000>,
+		      <0x10212000 0x1000>,
+		      <0x10214000 0x2000>,
+		      <0x10216000 0x2000>;
+	};
+
+	uart0: serial@11005000 {
+		compatible = "mediatek,mt6580-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11005000 0x400>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart1: serial@11006000 {
+		compatible = "mediatek,mt6580-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11006000 0x400>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+};

arch/arm/boot/dts/mt8135-evbp1.dts

@@ -24,6 +24,199 @@ memory {
 	};
 };
 
+&pwrap {
+	pmic: mt6397 {
+		compatible = "mediatek,mt6397";
+
+		mt6397regulator: mt6397regulator {
+			compatible = "mediatek,mt6397-regulator";
+
+			mt6397_vpca15_reg: buck_vpca15 {
+				regulator-compatible = "buck_vpca15";
+				regulator-name = "vpca15";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vpca7_reg: buck_vpca7 {
+				regulator-compatible = "buck_vpca7";
+				regulator-name = "vpca7";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vsramca15_reg: buck_vsramca15 {
+				regulator-compatible = "buck_vsramca15";
+				regulator-name = "vsramca15";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vsramca7_reg: buck_vsramca7 {
+				regulator-compatible = "buck_vsramca7";
+				regulator-name = "vsramca7";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vcore_reg: buck_vcore {
+				regulator-compatible = "buck_vcore";
+				regulator-name = "vcore";
+				regulator-min-microvolt = < 850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vgpu_reg: buck_vgpu {
+				regulator-compatible = "buck_vgpu";
+				regulator-name = "vgpu";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <115>;
+			};
+
+			mt6397_vdrm_reg: buck_vdrm {
+				regulator-compatible = "buck_vdrm";
+				regulator-name = "vdrm";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vio18_reg: buck_vio18 {
+				regulator-compatible = "buck_vio18";
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+			};
+
+			mt6397_vtcxo_reg: ldo_vtcxo {
+				regulator-compatible = "ldo_vtcxo";
+				regulator-name = "vtcxo";
+				regulator-always-on;
+			};
+
+			mt6397_va28_reg: ldo_va28 {
+				regulator-compatible = "ldo_va28";
+				regulator-name = "va28";
+				regulator-always-on;
+			};
+
+			mt6397_vcama_reg: ldo_vcama {
+				regulator-compatible = "ldo_vcama";
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vio28_reg: ldo_vio28 {
+				regulator-compatible = "ldo_vio28";
+				regulator-name = "vio28";
+				regulator-always-on;
+			};
+
+			mt6397_vusb_reg: ldo_vusb {
+				regulator-compatible = "ldo_vusb";
+				regulator-name = "vusb";
+			};
+
+			mt6397_vmc_reg: ldo_vmc {
+				regulator-compatible = "ldo_vmc";
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vmch_reg: ldo_vmch {
+				regulator-compatible = "ldo_vmch";
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vemc_3v3_reg: ldo_vemc3v3 {
+				regulator-compatible = "ldo_vemc3v3";
+				regulator-name = "vemc_3v3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp1_reg: ldo_vgp1 {
+				regulator-compatible = "ldo_vgp1";
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1220000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <240>;
+			};
+
+			mt6397_vgp2_reg: ldo_vgp2 {
+				regulator-compatible = "ldo_vgp2";
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp3_reg: ldo_vgp3 {
+				regulator-compatible = "ldo_vgp3";
+				regulator-name = "vcamaf";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp4_reg: ldo_vgp4 {
+				regulator-compatible = "ldo_vgp4";
+				regulator-name = "vgp4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp5_reg: ldo_vgp5 {
+				regulator-compatible = "ldo_vgp5";
+				regulator-name = "vgp5";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vgp6_reg: ldo_vgp6 {
+				regulator-compatible = "ldo_vgp6";
+				regulator-name = "vgp6";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+
+			mt6397_vibr_reg: ldo_vibr {
+				regulator-compatible = "ldo_vibr";
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <218>;
+			};
+		};
+	};
+};
+
 &uart3 {
 	status = "okay";
 };

arch/arm/boot/dts/mt8135.dtsi

@@ -12,8 +12,10 @@
  * GNU General Public License for more details.
  */
 
+#include <dt-bindings/clock/mt8135-clk.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset-controller/mt8135-resets.h>
 #include "skeleton64.dtsi"
 #include "mt8135-pinfunc.h"
 
@@ -88,12 +90,11 @@ rtc_clk: dummy32k {
 			#clock-cells = <0>;
 		};
 
-		uart_clk: dummy26m {
+		clk26m: clk26m {
 			compatible = "fixed-clock";
-			clock-frequency = <26000000>;
 			#clock-cells = <0>;
+			clock-frequency = <26000000>;
 		};
-
 	};
 
 	soc {
@@ -102,6 +103,26 @@ soc {
 		compatible = "simple-bus";
 		ranges;
 
+		topckgen: topckgen@10000000 {
+			compatible = "mediatek,mt8135-topckgen";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: infracfg@10001000 {
+			#reset-cells = <1>;
+			#clock-cells = <1>;
+			compatible = "mediatek,mt8135-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+		};
+
+		pericfg: pericfg@10003000 {
+			#reset-cells = <1>;
+			#clock-cells = <1>;
+			compatible = "mediatek,mt8135-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+		};
+
 		/*
 		 * Pinctrl access register at 0x10005000 and 0x1020c000 through
 		 * regmap. Register 0x1000b000 is used by EINT.
@@ -134,6 +155,19 @@ timer: timer@10008000 {
 			clock-names = "system-clk", "rtc-clk";
 		};
 
+		pwrap: pwrap@1000f000 {
+			compatible = "mediatek,mt8135-pwrap";
+			reg = <0 0x1000f000 0 0x1000>,
+				<0 0x11017000 0 0x1000>;
+			reg-names = "pwrap", "pwrap-bridge";
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
+					<&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+			reset-names = "pwrap", "pwrap-bridge";
+			clocks = <&clk26m>, <&clk26m>;
+			clock-names = "spi", "wrap";
+		};
+
 		sysirq: interrupt-controller@10200030 {
 			compatible = "mediatek,mt8135-sysirq",
 				     "mediatek,mt6577-sysirq";
@@ -143,6 +177,12 @@ sysirq: interrupt-controller@10200030 {
 			reg = <0 0x10200030 0 0x1c>;
 		};
 
+		apmixedsys: apmixedsys@10209000 {
+			compatible = "mediatek,mt8135-apmixedsys";
+			reg = <0 0x10209000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		syscfg_pctl_b: syscfg_pctl_b@1020c000 {
 			compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
 			reg = <0 0x1020c000 0 0x1000>;
@@ -163,7 +203,8 @@ uart0: serial@11006000 {
 			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
 			reg = <0 0x11006000 0 0x400>;
 			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+			clock-names = "baud", "bus";
 			status = "disabled";
 		};
 
@@ -171,7 +212,8 @@ uart1: serial@11007000 {
 			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
 			reg = <0 0x11007000 0 0x400>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+			clock-names = "baud", "bus";
 			status = "disabled";
 		};
 
@@ -179,7 +221,8 @@ uart2: serial@11008000 {
 			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
 			reg = <0 0x11008000 0 0x400>;
 			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+			clock-names = "baud", "bus";
 			status = "disabled";
 		};
 
@@ -187,7 +230,8 @@ uart3: serial@11009000 {
 			compatible = "mediatek,mt8135-uart","mediatek,mt6577-uart";
 			reg = <0 0x11009000 0 0x400>;
 			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+			clock-names = "baud", "bus";
 			status = "disabled";
 		};