Commit 55ec465e authored by Linus Walleij's avatar Linus Walleij

ARM: ixp4xx: Switch to use new IRQ+GPIO drivers

This deletes the old irq+gpiochip combo from the IXP4xx
machine and switches it over to use the new drivers merged
in respective subsystem.

Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 813e7d36
......@@ -434,10 +434,11 @@ config ARCH_IXP4XX
select DMABOUNCE if PCI
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_MULTI_HANDLER
select GPIO_IXP4XX
select GPIOLIB
select HAVE_PCI
select IXP4XX_IRQ
select NEED_MACH_IO_H
select SPARSE_IRQ
select USB_EHCI_BIG_ENDIAN_DESC
select USB_EHCI_BIG_ENDIAN_MMIO
help
......
......@@ -27,11 +27,11 @@
#include <linux/clockchips.h>
#include <linux/io.h>
#include <linux/export.h>
#include <linux/gpio/driver.h>
#include <linux/cpu.h>
#include <linux/pci.h>
#include <linux/sched_clock.h>
#include <linux/bitops.h>
#include <linux/irqchip/irq-ixp4xx.h>
#include <mach/udc.h>
#include <mach/hardware.h>
#include <mach/io.h>
......@@ -58,7 +58,6 @@
(IXP4XX_OST_RELOAD_MASK + 1) * HZ) * \
(IXP4XX_OST_RELOAD_MASK + 1)
static struct irq_domain *ixp4xx_irqdomain;
static void __init ixp4xx_clocksource_init(void);
static void __init ixp4xx_clockevent_init(void);
static struct clock_event_device clockevent_ixp4xx;
......@@ -95,266 +94,18 @@ void __init ixp4xx_map_io(void)
iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc));
}
/*
* GPIO-functions
*/
/*
* The following converted to the real HW bits the gpio_line_config
*/
/* GPIO pin types */
#define IXP4XX_GPIO_OUT 0x1
#define IXP4XX_GPIO_IN 0x2
/* GPIO signal types */
#define IXP4XX_GPIO_LOW 0
#define IXP4XX_GPIO_HIGH 1
/* GPIO Clocks */
#define IXP4XX_GPIO_CLK_0 14
#define IXP4XX_GPIO_CLK_1 15
static void gpio_line_config(u8 line, u32 direction)
{
if (direction == IXP4XX_GPIO_IN)
*IXP4XX_GPIO_GPOER |= (1 << line);
else
*IXP4XX_GPIO_GPOER &= ~(1 << line);
}
static void gpio_line_get(u8 line, int *value)
{
*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
}
static void gpio_line_set(u8 line, int value)
{
if (value == IXP4XX_GPIO_HIGH)
*IXP4XX_GPIO_GPOUTR |= (1 << line);
else if (value == IXP4XX_GPIO_LOW)
*IXP4XX_GPIO_GPOUTR &= ~(1 << line);
}
/*************************************************************************
* IXP4xx chipset IRQ handling
*
* TODO: GPIO IRQs should be marked invalid until the user of the IRQ
* (be it PCI or something else) configures that GPIO line
* as an IRQ.
**************************************************************************/
enum ixp4xx_irq_type {
IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE
};
/* Each bit represents an IRQ: 1: edge-triggered, 0: level triggered */
static unsigned long long ixp4xx_irq_edge = 0;
/*
* IRQ -> GPIO mapping table
*/
static signed char irq2gpio[32] = {
-1, -1, -1, -1, -1, -1, 0, 1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, 2, 3, 4, 5, 6,
7, 8, 9, 10, 11, 12, -1, -1,
};
static int ixp4xx_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
{
int irq;
for (irq = 0; irq < 32; irq++) {
if (irq2gpio[irq] == gpio)
return irq;
}
return -EINVAL;
}
static int ixp4xx_set_irq_type(struct irq_data *d, unsigned int type)
{
int line = irq2gpio[d->hwirq];
u32 int_style;
enum ixp4xx_irq_type irq_type;
volatile u32 *int_reg;
/*
* Only for GPIO IRQs
* all other IRQs are simply active low
*/
if (line < 0)
return 0;
switch (type){
case IRQ_TYPE_EDGE_BOTH:
int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
irq_type = IXP4XX_IRQ_EDGE;
break;
case IRQ_TYPE_EDGE_RISING:
int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
irq_type = IXP4XX_IRQ_EDGE;
break;
case IRQ_TYPE_EDGE_FALLING:
int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
irq_type = IXP4XX_IRQ_EDGE;
break;
case IRQ_TYPE_LEVEL_HIGH:
int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
irq_type = IXP4XX_IRQ_LEVEL;
break;
case IRQ_TYPE_LEVEL_LOW:
int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
irq_type = IXP4XX_IRQ_LEVEL;
break;
default:
return -EINVAL;
}
if (irq_type == IXP4XX_IRQ_EDGE)
ixp4xx_irq_edge |= (1 << d->hwirq);
else
ixp4xx_irq_edge &= ~(1 << d->hwirq);
if (line >= 8) { /* pins 8-15 */
line -= 8;
int_reg = IXP4XX_GPIO_GPIT2R;
} else { /* pins 0-7 */
int_reg = IXP4XX_GPIO_GPIT1R;
}
/* Clear the style for the appropriate pin */
*int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR <<
(line * IXP4XX_GPIO_STYLE_SIZE));
*IXP4XX_GPIO_GPISR = (1 << line);
/* Set the new style */
*int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
/* Configure the line as an input */
gpio_line_config(irq2gpio[d->hwirq], IXP4XX_GPIO_IN);
return 0;
}
static void ixp4xx_irq_mask(struct irq_data *d)
{
if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->hwirq >= 32)
*IXP4XX_ICMR2 &= ~(1 << (d->hwirq - 32));
else
*IXP4XX_ICMR &= ~(1 << d->hwirq);
}
static void ixp4xx_irq_ack(struct irq_data *d)
{
int line = (d->hwirq < 32) ? irq2gpio[d->hwirq] : -1;
if (line >= 0)
*IXP4XX_GPIO_GPISR = (1 << line);
}
/*
* Level triggered interrupts on GPIO lines can only be cleared when the
* interrupt condition disappears.
*/
static void ixp4xx_irq_unmask(struct irq_data *d)
{
if (!(ixp4xx_irq_edge & (1 << d->hwirq)))
ixp4xx_irq_ack(d);
if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && d->hwirq >= 32)
*IXP4XX_ICMR2 |= (1 << (d->hwirq - 32));
else
*IXP4XX_ICMR |= (1 << d->hwirq);
}
static struct irq_chip ixp4xx_irq_chip = {
.name = "IXP4xx",
.irq_ack = ixp4xx_irq_ack,
.irq_mask = ixp4xx_irq_mask,
.irq_unmask = ixp4xx_irq_unmask,
.irq_set_type = ixp4xx_set_irq_type,
};
asmlinkage void __exception_irq_entry ixp4xx_handle_irq(struct pt_regs *regs)
{
unsigned long status;
int i;
status = *IXP4XX_ICIP;
for_each_set_bit(i, &status, 32)
handle_domain_irq(ixp4xx_irqdomain, i, regs);
/*
* IXP465/IXP435 has an upper IRQ status register
*/
if ((cpu_is_ixp46x() || cpu_is_ixp43x())) {
status = *IXP4XX_ICIP2;
for_each_set_bit(i, &status, 32)
handle_domain_irq(ixp4xx_irqdomain, i + 32, regs);
}
}
static int ixp4xx_irqdomain_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hwirq)
{
irq_set_chip_data(irq, &ixp4xx_irq_chip);
irq_set_chip_and_handler(irq, &ixp4xx_irq_chip, handle_level_irq);
irq_set_probe(irq);
return 0;
}
static void ixp4xx_irqdomain_unmap(struct irq_domain *d, unsigned int irq)
{
irq_set_chip_and_handler(irq, NULL, NULL);
irq_set_chip_data(irq, NULL);
}
static const struct irq_domain_ops ixp4xx_irqdomain_ops = {
.map = ixp4xx_irqdomain_map,
.unmap = ixp4xx_irqdomain_unmap,
};
void __init ixp4xx_init_irq(void)
{
int nr_irqs;
/*
* ixp4xx does not implement the XScale PWRMODE register
* so it must not call cpu_do_idle().
*/
cpu_idle_poll_ctrl(true);
/* Route all sources to IRQ instead of FIQ */
*IXP4XX_ICLR = 0x0;
/* Disable all interrupt */
*IXP4XX_ICMR = 0x0;
if (cpu_is_ixp46x() || cpu_is_ixp43x()) {
/* Route upper 32 sources to IRQ instead of FIQ */
*IXP4XX_ICLR2 = 0x00;
/* Disable upper 32 interrupts */
*IXP4XX_ICMR2 = 0x00;
nr_irqs = 64;
} else {
nr_irqs = 32;
}
ixp4xx_irqdomain = irq_domain_add_simple(NULL, nr_irqs, IRQ_IXP4XX_BASE,
&ixp4xx_irqdomain_ops,
NULL);
if (!ixp4xx_irqdomain) {
pr_crit("can not add primary irqdomain\n");
return;
}
set_handle_irq(ixp4xx_handle_irq);
ixp4xx_irq_init(IXP4XX_INTC_BASE_PHYS,
(cpu_is_ixp46x() || cpu_is_ixp43x()));
}
/*************************************************************************
* IXP4xx timer tick
* We use OS timer1 on the CPU for the timer tick and the timestamp
......@@ -408,6 +159,24 @@ static struct resource ixp4xx_udc_resources[] = {
},
};
static struct resource ixp4xx_gpio_resource[] = {
{
.start = IXP4XX_GPIO_BASE_PHYS,
.end = IXP4XX_GPIO_BASE_PHYS + 0xfff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device ixp4xx_gpio_device = {
.name = "ixp4xx-gpio",
.id = -1,
.dev = {
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = ixp4xx_gpio_resource,
.num_resources = ARRAY_SIZE(ixp4xx_gpio_resource),
};
/*
* USB device controller. The IXP4xx uses the same controller as PXA25X,
* so we just use the same device.
......@@ -423,6 +192,7 @@ static struct platform_device ixp4xx_udc_device = {
};
static struct platform_device *ixp4xx_devices[] __initdata = {
&ixp4xx_gpio_device,
&ixp4xx_udc_device,
};
......@@ -457,56 +227,12 @@ static struct platform_device *ixp46x_devices[] __initdata = {
unsigned long ixp4xx_exp_bus_size;
EXPORT_SYMBOL(ixp4xx_exp_bus_size);
static int ixp4xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
{
gpio_line_config(gpio, IXP4XX_GPIO_IN);
return 0;
}
static int ixp4xx_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
int level)
{
gpio_line_set(gpio, level);
gpio_line_config(gpio, IXP4XX_GPIO_OUT);
return 0;
}
static int ixp4xx_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
{
int value;
gpio_line_get(gpio, &value);
return value;
}
static void ixp4xx_gpio_set_value(struct gpio_chip *chip, unsigned gpio,
int value)
{
gpio_line_set(gpio, value);
}
static struct gpio_chip ixp4xx_gpio_chip = {
.label = "IXP4XX_GPIO_CHIP",
.direction_input = ixp4xx_gpio_direction_input,
.direction_output = ixp4xx_gpio_direction_output,
.get = ixp4xx_gpio_get_value,
.set = ixp4xx_gpio_set_value,
.to_irq = ixp4xx_gpio_to_irq,
.base = 0,
.ngpio = 16,
};
void __init ixp4xx_sys_init(void)
{
ixp4xx_exp_bus_size = SZ_16M;
platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices));
gpiochip_add_data(&ixp4xx_gpio_chip, NULL);
if (cpu_is_ixp46x()) {
int region;
......
......@@ -270,9 +270,6 @@ static void __init dsmg600_init(void)
{
ixp4xx_sys_init();
/* Make sure that GPIO14 and GPIO15 are not used as clocks */
*IXP4XX_GPIO_GPCLKR = 0;
dsmg600_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
dsmg600_flash_resource.end =
IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
......
......@@ -147,95 +147,6 @@
#define IXP4XX_I2C_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000)
#define IXP4XX_SSP_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000)
/*
* Constants to make it easy to access Interrupt Controller registers
*/
#define IXP4XX_ICPR_OFFSET 0x00 /* Interrupt Status */
#define IXP4XX_ICMR_OFFSET 0x04 /* Interrupt Enable */
#define IXP4XX_ICLR_OFFSET 0x08 /* Interrupt IRQ/FIQ Select */
#define IXP4XX_ICIP_OFFSET 0x0C /* IRQ Status */
#define IXP4XX_ICFP_OFFSET 0x10 /* FIQ Status */
#define IXP4XX_ICHR_OFFSET 0x14 /* Interrupt Priority */
#define IXP4XX_ICIH_OFFSET 0x18 /* IRQ Highest Pri Int */
#define IXP4XX_ICFH_OFFSET 0x1C /* FIQ Highest Pri Int */
/*
* IXP465-only
*/
#define IXP4XX_ICPR2_OFFSET 0x20 /* Interrupt Status 2 */
#define IXP4XX_ICMR2_OFFSET 0x24 /* Interrupt Enable 2 */
#define IXP4XX_ICLR2_OFFSET 0x28 /* Interrupt IRQ/FIQ Select 2 */
#define IXP4XX_ICIP2_OFFSET 0x2C /* IRQ Status */
#define IXP4XX_ICFP2_OFFSET 0x30 /* FIQ Status */
#define IXP4XX_ICEEN_OFFSET 0x34 /* Error High Pri Enable */
/*
* Interrupt Controller Register Definitions.
*/
#define IXP4XX_INTC_REG(x) ((volatile u32 *)(IXP4XX_INTC_BASE_VIRT+(x)))
#define IXP4XX_ICPR IXP4XX_INTC_REG(IXP4XX_ICPR_OFFSET)
#define IXP4XX_ICMR IXP4XX_INTC_REG(IXP4XX_ICMR_OFFSET)
#define IXP4XX_ICLR IXP4XX_INTC_REG(IXP4XX_ICLR_OFFSET)
#define IXP4XX_ICIP IXP4XX_INTC_REG(IXP4XX_ICIP_OFFSET)
#define IXP4XX_ICFP IXP4XX_INTC_REG(IXP4XX_ICFP_OFFSET)
#define IXP4XX_ICHR IXP4XX_INTC_REG(IXP4XX_ICHR_OFFSET)
#define IXP4XX_ICIH IXP4XX_INTC_REG(IXP4XX_ICIH_OFFSET)
#define IXP4XX_ICFH IXP4XX_INTC_REG(IXP4XX_ICFH_OFFSET)
#define IXP4XX_ICPR2 IXP4XX_INTC_REG(IXP4XX_ICPR2_OFFSET)
#define IXP4XX_ICMR2 IXP4XX_INTC_REG(IXP4XX_ICMR2_OFFSET)
#define IXP4XX_ICLR2 IXP4XX_INTC_REG(IXP4XX_ICLR2_OFFSET)
#define IXP4XX_ICIP2 IXP4XX_INTC_REG(IXP4XX_ICIP2_OFFSET)
#define IXP4XX_ICFP2 IXP4XX_INTC_REG(IXP4XX_ICFP2_OFFSET)
#define IXP4XX_ICEEN IXP4XX_INTC_REG(IXP4XX_ICEEN_OFFSET)
/*
* Constants to make it easy to access GPIO registers
*/
#define IXP4XX_GPIO_GPOUTR_OFFSET 0x00
#define IXP4XX_GPIO_GPOER_OFFSET 0x04
#define IXP4XX_GPIO_GPINR_OFFSET 0x08
#define IXP4XX_GPIO_GPISR_OFFSET 0x0C
#define IXP4XX_GPIO_GPIT1R_OFFSET 0x10
#define IXP4XX_GPIO_GPIT2R_OFFSET 0x14
#define IXP4XX_GPIO_GPCLKR_OFFSET 0x18
#define IXP4XX_GPIO_GPDBSELR_OFFSET 0x1C
/*
* GPIO Register Definitions.
* [Only perform 32bit reads/writes]
*/
#define IXP4XX_GPIO_REG(x) ((volatile u32 *)(IXP4XX_GPIO_BASE_VIRT+(x)))
#define IXP4XX_GPIO_GPOUTR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOUTR_OFFSET)
#define IXP4XX_GPIO_GPOER IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOER_OFFSET)
#define IXP4XX_GPIO_GPINR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPINR_OFFSET)
#define IXP4XX_GPIO_GPISR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPISR_OFFSET)
#define IXP4XX_GPIO_GPIT1R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT1R_OFFSET)
#define IXP4XX_GPIO_GPIT2R IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT2R_OFFSET)
#define IXP4XX_GPIO_GPCLKR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPCLKR_OFFSET)
#define IXP4XX_GPIO_GPDBSELR IXP4XX_GPIO_REG(IXP4XX_GPIO_GPDBSELR_OFFSET)
/*
* GPIO register bit definitions
*/
/* Interrupt styles
*/
#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH 0x0
#define IXP4XX_GPIO_STYLE_ACTIVE_LOW 0x1
#define IXP4XX_GPIO_STYLE_RISING_EDGE 0x2
#define IXP4XX_GPIO_STYLE_FALLING_EDGE 0x3
#define IXP4XX_GPIO_STYLE_TRANSITIONAL 0x4
/*
* Mask used to clear interrupt styles
*/
#define IXP4XX_GPIO_STYLE_CLEAR 0x7
#define IXP4XX_GPIO_STYLE_SIZE 3
/*
* Constants to make it easy to access Timer Control/Status registers
*/
......
......@@ -281,9 +281,6 @@ static void __init nas100d_init(void)
ixp4xx_sys_init();
/* gpio 14 and 15 are _not_ clocks */
*IXP4XX_GPIO_GPCLKR = 0;
nas100d_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
nas100d_flash_resource.end =
IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment