ARM: dts: imx6: use generic node name for fixed regulator

The device tree specification recommends that generic name should be
used for nodes.  So instead of naming those fixed regulator nodes
arbitrarily, let's use the generic name 'regulator@num' for those nodes.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

arch/arm/boot/dts/imx6q-arm2.dts

@@ -23,17 +23,21 @@ memory {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_3p3v: 3p3v {
+		reg_3p3v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3P3V";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
 
-		reg_usb_otg_vbus: usb_otg_vbus {
+		reg_usb_otg_vbus: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			regulator-name = "usb_otg_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;

arch/arm/boot/dts/imx6q-sabrelite.dts

@@ -23,25 +23,30 @@ memory {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_2p5v: 2p5v {
+		reg_2p5v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "2P5V";
 			regulator-min-microvolt = <2500000>;
 			regulator-max-microvolt = <2500000>;
 			regulator-always-on;
 		};
 
-		reg_3p3v: 3p3v {
+		reg_3p3v: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			regulator-name = "3P3V";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 			regulator-always-on;
 		};
 
-		reg_usb_otg_vbus: usb_otg_vbus {
+		reg_usb_otg_vbus: regulator@2 {
 			compatible = "regulator-fixed";
+			reg = <2>;
 			regulator-name = "usb_otg_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;

arch/arm/boot/dts/imx6qdl-sabresd.dtsi

@@ -17,9 +17,12 @@ memory {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_usb_otg_vbus: usb_otg_vbus {
+		reg_usb_otg_vbus: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "usb_otg_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -27,8 +30,9 @@ reg_usb_otg_vbus: usb_otg_vbus {
 			enable-active-high;
 		};
 
-		reg_usb_h1_vbus: usb_h1_vbus {
+		reg_usb_h1_vbus: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			regulator-name = "usb_h1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -36,8 +40,9 @@ reg_usb_h1_vbus: usb_h1_vbus {
 			enable-active-high;
 		};
 
-		reg_audio: wm8962_supply {
+		reg_audio: regulator@2 {
 			compatible = "regulator-fixed";
+			reg = <2>;
 			regulator-name = "wm8962-supply";
 			gpio = <&gpio4 10 0>;
 			enable-active-high;

arch/arm/boot/dts/imx6qdl-wandboard.dtsi

@@ -12,17 +12,21 @@
 / {
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_2p5v: 2p5v {
+		reg_2p5v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "2P5V";
 			regulator-min-microvolt = <2500000>;
 			regulator-max-microvolt = <2500000>;
 			regulator-always-on;
 		};
 
-		reg_3p3v: 3p3v {
+		reg_3p3v: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			regulator-name = "3P3V";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;

arch/arm/boot/dts/imx6sl-evk.dts

@@ -20,9 +20,12 @@ memory {
 
 	regulators {
 		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
 
-		reg_usb_otg1_vbus: usb_otg1_vbus {
+		reg_usb_otg1_vbus: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "usb_otg1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -30,8 +33,9 @@ reg_usb_otg1_vbus: usb_otg1_vbus {
 			enable-active-high;
 		};
 
-		reg_usb_otg2_vbus: usb_otg2_vbus {
+		reg_usb_otg2_vbus: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			regulator-name = "usb_otg2_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;