arm64: dts: rockchip: Fix Pine64 Quartz4-B PMIC interrupt

Ths PMIC's interrupt line is tied to GPIO0_A3. This is described
correctly for the pinmux setting, but incorrectly for the interrupt.

Correct the interrupt setting so that interrupts from the PMIC get
delivered.

Fixes: dcc8c66b ("arm64: dts: rockchip: add Pine64 Quartz64-B device tree")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20221106161513.4140-1-wens@kernel.orgSigned-off-by: Heiko Stuebner <heiko@sntech.de>

arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts

@@ -246,7 +246,7 @@ rk809: pmic@20 {
 		compatible = "rockchip,rk809";
 		reg = <0x20>;
 		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
 		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
 		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
 		clock-names = "mclk";