Merge branch 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:

 - tracepoints when Linux acts as an I2C client

 - added support for AMD PSP

 - whole subsystem now uses generic_handle_irq_safe()

 - piix4 driver gained MMIO access enabling so far missed controllers
   with AMD chipsets

 - a bulk of device driver updates, refactorization, and fixes.

* 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (61 commits)
  i2c: mux: demux-pinctrl: do not deactivate a master that is not active
  i2c: meson: Fix wrong speed use from probe
  i2c: add tracepoints for I2C slave events
  i2c: designware: Remove code duplication
  i2c: cros-ec-tunnel: Fix syntax errors in comments
  MAINTAINERS: adjust XLP9XX I2C DRIVER after removing the devicetree binding
  i2c: designware: Mark dw_i2c_plat_{suspend,resume}() as __maybe_unused
  i2c: mediatek: Add i2c compatible for Mediatek MT8168
  dt-bindings: i2c: update bindings for MT8168 SoC
  i2c: mt65xx: Simplify with clk-bulk
  i2c: i801: Drop two outdated comments
  i2c: xiic: Make bus names unique
  i2c: i801: Add support for the Process Call command
  i2c: i801: Drop useless masking in i801_access
  i2c: tegra: Add SMBus block read function
  i2c: designware: Use the i2c_mark_adapter_suspended/resumed() helpers
  i2c: designware: Lock the adapter while setting the suspended flag
  i2c: mediatek: remove redundant null check
  i2c: mediatek: modify bus speed calculation formula
  i2c: designware: Fix improper usage of readl
  ...

Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt

@@ -12,8 +12,10 @@ Required properties:
       "mediatek,mt7622-i2c": for MediaTek MT7622
       "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623
       "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629
+      "mediatek,mt8168-i2c": for MediaTek MT8168
       "mediatek,mt8173-i2c": for MediaTek MT8173
       "mediatek,mt8183-i2c": for MediaTek MT8183
+      "mediatek,mt8186-i2c": for MediaTek MT8186
       "mediatek,mt8192-i2c": for MediaTek MT8192
       "mediatek,mt8195-i2c", "mediatek,mt8192-i2c": for MediaTek MT8195
       "mediatek,mt8516-i2c", "mediatek,mt2712-i2c": for MediaTek MT8516

Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt

@@ -10,6 +10,7 @@ PROPERTIES:
 		"qcom,msm8996-cci"
 		"qcom,sdm845-cci"
 		"qcom,sm8250-cci"
+		"qcom,sm8450-cci"
 
 - reg
 	Usage: required
@@ -43,7 +44,8 @@ PROPERTIES:
 SUBNODES:
 
 The CCI provides I2C masters for one (msm8916) or two i2c busses (msm8996,
-sdm845 and sm8250), described as subdevices named "i2c-bus@0" and "i2c-bus@1".
+sdm845, sm8250 and sm8450), described as subdevices named "i2c-bus@0" and
+"i2c-bus@1".
 
 PROPERTIES:
 

Documentation/devicetree/bindings/i2c/microchip,corei2c.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/microchip,corei2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MPFS I2C Controller Device Tree Bindings
+
+maintainers:
+  - Daire McNamara <daire.mcnamara@microchip.com>
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: microchip,mpfs-i2c # Microchip PolarFire SoC compatible SoCs
+          - const: microchip,corei2c-rtl-v7 # Microchip Fabric based i2c IP core
+      - const: microchip,corei2c-rtl-v7 # Microchip Fabric based i2c IP core
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    description: |
+      Desired I2C bus clock frequency in Hz. As only Standard and Fast
+      modes are supported, possible values are 100000 and 400000.
+    enum: [100000, 400000]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c@2010a000 {
+      compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7";
+      reg = <0x2010a000 0x1000>;
+      clocks = <&clkcfg 15>;
+      interrupt-parent = <&plic>;
+      interrupts = <58>;
+      clock-frequency = <100000>;
+    };
+...

Documentation/devicetree/bindings/i2c/renesas,rcar-i2c.yaml

@@ -49,6 +49,11 @@ properties:
               - renesas,i2c-r8a779a0     # R-Car V3U
           - const: renesas,rcar-gen3-i2c # R-Car Gen3 and RZ/G2
 
+      - items:
+          - enum:
+              - renesas,i2c-r8a779f0     # R-Car S4-8
+          - const: renesas,rcar-gen4-i2c # R-Car Gen4
+
   reg:
     maxItems: 1
 
@@ -132,6 +137,7 @@ allOf:
             enum:
               - renesas,rcar-gen2-i2c
               - renesas,rcar-gen3-i2c
+              - renesas,rcar-gen4-i2c
     then:
       required:
         - resets

Documentation/firmware-guide/acpi/enumeration.rst

@@ -142,6 +142,45 @@ In robust cases the client unfortunately needs to call
 acpi_dma_request_slave_chan_by_index() directly and therefore choose the
 specific FixedDMA resource by its index.
 
+Named Interrupts
+================
+
+Drivers enumerated via ACPI can have names to interrupts in the ACPI table
+which can be used to get the IRQ number in the driver.
+
+The interrupt name can be listed in _DSD as 'interrupt-names'. The names
+should be listed as an array of strings which will map to the Interrupt()
+resource in the ACPI table corresponding to its index.
+
+The table below shows an example of its usage::
+
+    Device (DEV0) {
+        ...
+        Name (_CRS, ResourceTemplate() {
+            ...
+            Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive) {
+                0x20,
+                0x24
+            }
+        })
+
+        Name (_DSD, Package () {
+            ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
+            Package () {
+                Package () {"interrupt-names",
+                Package (2) {"default", "alert"}},
+            }
+        ...
+        })
+    }
+
+The interrupt name 'default' will correspond to 0x20 in Interrupt()
+resource and 'alert' to 0x24. Note that only the Interrupt() resource
+is mapped and not GpioInt() or similar.
+
+The driver can call the function - fwnode_irq_get_byname() with the fwnode
+and interrupt name as arguments to get the corresponding IRQ number.
+
 SPI serial bus support
 ======================
 

Documentation/i2c/busses/i2c-i801.rst

@@ -45,6 +45,7 @@ Supported adapters:
   * Intel Jasper Lake (SOC)
   * Intel Emmitsburg (PCH)
   * Intel Alder Lake (PCH)
+  * Intel Raptor Lake (PCH)
 
    Datasheets: Publicly available at the Intel website
 

MAINTAINERS

@@ -18877,6 +18877,7 @@ SYNOPSYS DESIGNWARE I2C DRIVER
 M:	Jarkko Nikula <jarkko.nikula@linux.intel.com>
 R:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 R:	Mika Westerberg <mika.westerberg@linux.intel.com>
+R:	Jan Dabros <jsd@semihalf.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-designware-*
@@ -21520,7 +21521,6 @@ M:	George Cherian <gcherian@marvell.com>
 L:	linux-i2c@vger.kernel.org
 S:	Supported
 W:	http://www.marvell.com
-F:	Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt
 F:	drivers/i2c/busses/i2c-xlp9xx.c
 
 XRA1403 GPIO EXPANDER

drivers/acpi/acpi_apd.c

@@ -232,12 +232,13 @@ static const struct acpi_device_id acpi_apd_device_ids[] = {
 	/* Generic apd devices */
 #ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
 	{ "AMD0010", APD_ADDR(cz_i2c_desc) },
-	{ "AMDI0010", APD_ADDR(wt_i2c_desc) },
 	{ "AMD0020", APD_ADDR(cz_uart_desc) },
-	{ "AMDI0020", APD_ADDR(cz_uart_desc) },
-	{ "AMDI0022", APD_ADDR(cz_uart_desc) },
 	{ "AMD0030", },
 	{ "AMD0040", APD_ADDR(fch_misc_desc)},
+	{ "AMDI0010", APD_ADDR(wt_i2c_desc) },
+	{ "AMDI0019", APD_ADDR(wt_i2c_desc) },
+	{ "AMDI0020", APD_ADDR(cz_uart_desc) },
+	{ "AMDI0022", APD_ADDR(cz_uart_desc) },
 	{ "HYGO0010", APD_ADDR(wt_i2c_desc) },
 #endif
 #ifdef CONFIG_ARM64

drivers/base/property.c

@@ -935,6 +935,35 @@ void __iomem *fwnode_iomap(struct fwnode_handle *fwnode, int index)
 }
 EXPORT_SYMBOL(fwnode_iomap);
 
+/**
+ * fwnode_irq_get_byname - Get IRQ from a fwnode using its name
+ * @fwnode:	Pointer to the firmware node
+ * @name:	IRQ name
+ *
+ * Description:
+ * Find a match to the string @name in the 'interrupt-names' string array
+ * in _DSD for ACPI, or of_node for Device Tree. Then get the Linux IRQ
+ * number of the IRQ resource corresponding to the index of the matched
+ * string.
+ *
+ * Return:
+ * Linux IRQ number on success, or negative errno otherwise.
+ */
+int fwnode_irq_get_byname(const struct fwnode_handle *fwnode, const char *name)
+{
+	int index;
+
+	if (!name)
+		return -EINVAL;
+
+	index = fwnode_property_match_string(fwnode, "interrupt-names",  name);
+	if (index < 0)
+		return index;
+
+	return fwnode_irq_get(fwnode, index);
+}
+EXPORT_SYMBOL(fwnode_irq_get_byname);
+
 /**
  * fwnode_graph_get_next_endpoint - Get next endpoint firmware node
  * @fwnode: Pointer to the parent firmware node

drivers/i2c/busses/Kconfig

@@ -9,6 +9,13 @@ menu "I2C Hardware Bus support"
 comment "PC SMBus host controller drivers"
 	depends on PCI
 
+config I2C_CCGX_UCSI
+	tristate
+	help
+	  A common module to provide an API to instantiate UCSI device
+	  for Cypress CCGx Type-C controller. Individual bus drivers
+	  need to select this one on demand.
+
 config I2C_ALI1535
 	tristate "ALI 1535"
 	depends on PCI
@@ -148,6 +155,7 @@ config I2C_I801
 	    Jasper Lake (SOC)
 	    Emmitsburg (PCH)
 	    Alder Lake (PCH)
+	    Raptor Lake (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
@@ -245,6 +253,7 @@ config I2C_NFORCE2_S4985
 config I2C_NVIDIA_GPU
 	tristate "NVIDIA GPU I2C controller"
 	depends on PCI
+	select I2C_CCGX_UCSI
 	help
 	  If you say yes to this option, support will be included for the
 	  NVIDIA GPU I2C controller which is used to communicate with the GPU's
@@ -477,8 +486,8 @@ config I2C_BCM_KONA
 
 config I2C_BRCMSTB
 	tristate "BRCM Settop/DSL I2C controller"
-	depends on ARCH_BCM2835 || ARCH_BRCMSTB || BMIPS_GENERIC || \
-		   ARCH_BCM_63XX || COMPILE_TEST
+	depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCM_63XX || \
+		   ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
 	default y
 	help
 	  If you say yes to this option, support will be included for the
@@ -553,6 +562,17 @@ config I2C_DESIGNWARE_PLATFORM
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-designware-platform.
 
+config I2C_DESIGNWARE_AMDPSP
+	bool "AMD PSP I2C semaphore support"
+	depends on X86_MSR
+	depends on ACPI
+	depends on I2C_DESIGNWARE_PLATFORM
+	help
+	  This driver enables managed host access to the selected I2C bus shared
+	  between AMD CPU and AMD PSP.
+
+	  You should say Y if running on an AMD system equipped with the PSP.
+
 config I2C_DESIGNWARE_BAYTRAIL
 	bool "Intel Baytrail I2C semaphore support"
 	depends on ACPI
@@ -570,6 +590,7 @@ config I2C_DESIGNWARE_PCI
 	tristate "Synopsys DesignWare PCI"
 	depends on PCI
 	select I2C_DESIGNWARE_CORE
+	select I2C_CCGX_UCSI
 	help
 	  If you say yes to this option, support will be included for the
 	  Synopsys DesignWare I2C adapter. Only master mode is supported.

drivers/i2c/busses/Makefile

@@ -6,6 +6,9 @@
 # ACPI drivers
 obj-$(CONFIG_I2C_SCMI)		+= i2c-scmi.o
 
+# Auxiliary I2C/SMBus modules
+obj-$(CONFIG_I2C_CCGX_UCSI)	+= i2c-ccgx-ucsi.o
+
 # PC SMBus host controller drivers
 obj-$(CONFIG_I2C_ALI1535)	+= i2c-ali1535.o
 obj-$(CONFIG_I2C_ALI1563)	+= i2c-ali1563.o
@@ -54,6 +57,7 @@ i2c-designware-core-y					+= i2c-designware-master.o
 i2c-designware-core-$(CONFIG_I2C_DESIGNWARE_SLAVE) 	+= i2c-designware-slave.o
 obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM)			+= i2c-designware-platform.o
 i2c-designware-platform-y 				:= i2c-designware-platdrv.o
+i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_AMDPSP)	+= i2c-designware-amdpsp.o
 i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_BAYTRAIL) += i2c-designware-baytrail.o
 obj-$(CONFIG_I2C_DESIGNWARE_PCI)			+= i2c-designware-pci.o
 i2c-designware-pci-y					:= i2c-designware-pcidrv.o

drivers/i2c/busses/i2c-amd-mp2-pci.c

@@ -308,11 +308,8 @@ static int amd_mp2_pci_init(struct amd_mp2_dev *privdata,
 	pci_set_master(pci_dev);
 
 	rc = dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(64));
-	if (rc) {
-		rc = dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(32));
-		if (rc)
-			goto err_dma_mask;
-	}
+	if (rc)
+		goto err_dma_mask;
 
 	/* Set up intx irq */
 	writel(0, privdata->mmio + AMD_P2C_MSG_INTEN);

drivers/i2c/busses/i2c-bcm2835.c

@@ -454,18 +454,20 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
 	ret = clk_prepare_enable(i2c_dev->bus_clk);
 	if (ret) {
 		dev_err(&pdev->dev, "Couldn't prepare clock");
-		return ret;
+		goto err_put_exclusive_rate;
 	}
 
 	i2c_dev->irq = platform_get_irq(pdev, 0);
-	if (i2c_dev->irq < 0)
-		return i2c_dev->irq;
+	if (i2c_dev->irq < 0) {
+		ret = i2c_dev->irq;
+		goto err_disable_unprepare_clk;
+	}
 
 	ret = request_irq(i2c_dev->irq, bcm2835_i2c_isr, IRQF_SHARED,
 			  dev_name(&pdev->dev), i2c_dev);
 	if (ret) {
 		dev_err(&pdev->dev, "Could not request IRQ\n");
-		return -ENODEV;
+		goto err_disable_unprepare_clk;
 	}
 
 	adap = &i2c_dev->adapter;
@@ -489,7 +491,16 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
 
 	ret = i2c_add_adapter(adap);
 	if (ret)
-		free_irq(i2c_dev->irq, i2c_dev);
+		goto err_free_irq;
+
+	return 0;
+
+err_free_irq:
+	free_irq(i2c_dev->irq, i2c_dev);
+err_disable_unprepare_clk:
+	clk_disable_unprepare(i2c_dev->bus_clk);
+err_put_exclusive_rate:
+	clk_rate_exclusive_put(i2c_dev->bus_clk);
 
 	return ret;
 }

drivers/i2c/busses/i2c-ccgx-ucsi.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Instantiate UCSI device for Cypress CCGx Type-C controller.
+ * Derived from i2c-designware-pcidrv.c and i2c-nvidia-gpu.c.
+ */
+
+#include <linux/i2c.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/string.h>
+
+#include "i2c-ccgx-ucsi.h"
+
+struct software_node;
+
+struct i2c_client *i2c_new_ccgx_ucsi(struct i2c_adapter *adapter, int irq,
+				     const struct software_node *swnode)
+{
+	struct i2c_board_info info = {};
+
+	strscpy(info.type, "ccgx-ucsi", sizeof(info.type));
+	info.addr = 0x08;
+	info.irq = irq;
+	info.swnode = swnode;
+
+	return i2c_new_client_device(adapter, &info);
+}
+EXPORT_SYMBOL_GPL(i2c_new_ccgx_ucsi);
+
+MODULE_LICENSE("GPL");

drivers/i2c/busses/i2c-ccgx-ucsi.h

+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef __I2C_CCGX_UCSI_H_
+#define __I2C_CCGX_UCSI_H_
+
+struct i2c_adapter;
+struct i2c_client;
+struct software_node;
+
+struct i2c_client *i2c_new_ccgx_ucsi(struct i2c_adapter *adapter, int irq,
+				     const struct software_node *swnode);
+#endif /* __I2C_CCGX_UCSI_H_ */

drivers/i2c/busses/i2c-cht-wc.c

@@ -100,15 +100,8 @@ static irqreturn_t cht_wc_i2c_adap_thread_handler(int id, void *data)
 	 * interrupt handler as well, so running the client irq handler from
 	 * this thread will cause things to lock up.
 	 */
-	if (reg & CHT_WC_EXTCHGRIRQ_CLIENT_IRQ) {
-		/*
-		 * generic_handle_irq expects local IRQs to be disabled
-		 * as normally it is called from interrupt context.
-		 */
-		local_irq_disable();
-		generic_handle_irq(adap->client_irq);
-		local_irq_enable();
-	}
+	if (reg & CHT_WC_EXTCHGRIRQ_CLIENT_IRQ)
+		generic_handle_irq_safe(adap->client_irq);
 
 	return IRQ_HANDLED;
 }

drivers/i2c/busses/i2c-cros-ec-tunnel.c

@@ -107,7 +107,7 @@ static int ec_i2c_construct_message(u8 *buf, const struct i2c_msg i2c_msgs[],
 /**
  * ec_i2c_count_response - Count bytes needed for ec_i2c_parse_response
  *
- * @i2c_msgs: The i2c messages to to fill up.
+ * @i2c_msgs: The i2c messages to fill up.
  * @num: The number of i2c messages expected.
  *
  * Returns the number of response bytes expeced.
@@ -131,7 +131,7 @@ static int ec_i2c_count_response(struct i2c_msg i2c_msgs[], int num)
  * We'll take the EC's response and copy it back into msgs.
  *
  * @buf: The buffer to parse.
- * @i2c_msgs: The i2c messages to to fill up.
+ * @i2c_msgs: The i2c messages to fill up.
  * @num: The number of i2c messages; will be modified to include the actual
  *	 number received.
  *

drivers/i2c/busses/i2c-designware-amdpsp.c

+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/i2c.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/psp-sev.h>
+#include <linux/types.h>
+
+#include <asm/msr.h>
+
+#include "i2c-designware-core.h"
+
+#define MSR_AMD_PSP_ADDR	0xc00110a2
+#define PSP_MBOX_OFFSET		0x10570
+#define PSP_CMD_TIMEOUT_US	(500 * USEC_PER_MSEC)
+
+#define PSP_I2C_REQ_BUS_CMD		0x64
+#define PSP_I2C_REQ_RETRY_CNT		10
+#define PSP_I2C_REQ_RETRY_DELAY_US	(50 * USEC_PER_MSEC)
+#define PSP_I2C_REQ_STS_OK		0x0
+#define PSP_I2C_REQ_STS_BUS_BUSY	0x1
+#define PSP_I2C_REQ_STS_INV_PARAM	0x3
+
+#define PSP_MBOX_FIELDS_STS		GENMASK(15, 0)
+#define PSP_MBOX_FIELDS_CMD		GENMASK(23, 16)
+#define PSP_MBOX_FIELDS_RESERVED	GENMASK(29, 24)
+#define PSP_MBOX_FIELDS_RECOVERY	BIT(30)
+#define PSP_MBOX_FIELDS_READY		BIT(31)
+
+struct psp_req_buffer_hdr {
+	u32 total_size;
+	u32 status;
+};
+
+enum psp_i2c_req_type {
+	PSP_I2C_REQ_ACQUIRE,
+	PSP_I2C_REQ_RELEASE,
+	PSP_I2C_REQ_MAX
+};
+
+struct psp_i2c_req {
+	struct psp_req_buffer_hdr hdr;
+	enum psp_i2c_req_type type;
+};
+
+struct psp_mbox {
+	u32 cmd_fields;
+	u64 i2c_req_addr;
+} __packed;
+
+static DEFINE_MUTEX(psp_i2c_access_mutex);
+static unsigned long psp_i2c_sem_acquired;
+static void __iomem *mbox_iomem;
+static u32 psp_i2c_access_count;
+static bool psp_i2c_mbox_fail;
+static struct device *psp_i2c_dev;
+
+/*
+ * Implementation of PSP-x86 i2c-arbitration mailbox introduced for AMD Cezanne
+ * family of SoCs.
+ */
+
+static int psp_get_mbox_addr(unsigned long *mbox_addr)
+{
+	unsigned long long psp_mmio;
+
+	if (rdmsrl_safe(MSR_AMD_PSP_ADDR, &psp_mmio))
+		return -EIO;
+
+	*mbox_addr = (unsigned long)(psp_mmio + PSP_MBOX_OFFSET);
+
+	return 0;
+}
+
+static int psp_mbox_probe(void)
+{
+	unsigned long mbox_addr;
+	int ret;
+
+	ret = psp_get_mbox_addr(&mbox_addr);
+	if (ret)
+		return ret;
+
+	mbox_iomem = ioremap(mbox_addr, sizeof(struct psp_mbox));
+	if (!mbox_iomem)
+		return -ENOMEM;
+
+	return 0;
+}
+
+/* Recovery field should be equal 0 to start sending commands */
+static int psp_check_mbox_recovery(struct psp_mbox __iomem *mbox)
+{
+	u32 tmp;
+
+	tmp = readl(&mbox->cmd_fields);
+
+	return FIELD_GET(PSP_MBOX_FIELDS_RECOVERY, tmp);
+}
+
+static int psp_wait_cmd(struct psp_mbox __iomem *mbox)
+{
+	u32 tmp, expected;
+
+	/* Expect mbox_cmd to be cleared and ready bit to be set by PSP */
+	expected = FIELD_PREP(PSP_MBOX_FIELDS_READY, 1);
+
+	/*
+	 * Check for readiness of PSP mailbox in a tight loop in order to
+	 * process further as soon as command was consumed.
+	 */
+	return readl_poll_timeout(&mbox->cmd_fields, tmp, (tmp == expected),
+				  0, PSP_CMD_TIMEOUT_US);
+}
+
+/* Status equal to 0 means that PSP succeed processing command */
+static u32 psp_check_mbox_sts(struct psp_mbox __iomem *mbox)
+{
+	u32 cmd_reg;
+
+	cmd_reg = readl(&mbox->cmd_fields);
+
+	return FIELD_GET(PSP_MBOX_FIELDS_STS, cmd_reg);
+}
+
+static int psp_send_cmd(struct psp_i2c_req *req)
+{
+	struct psp_mbox __iomem *mbox = mbox_iomem;
+	phys_addr_t req_addr;
+	u32 cmd_reg;
+
+	if (psp_check_mbox_recovery(mbox))
+		return -EIO;
+
+	if (psp_wait_cmd(mbox))
+		return -EBUSY;
+
+	/*
+	 * Fill mailbox with address of command-response buffer, which will be
+	 * used for sending i2c requests as well as reading status returned by
+	 * PSP. Use physical address of buffer, since PSP will map this region.
+	 */
+	req_addr = __psp_pa((void *)req);
+	writeq(req_addr, &mbox->i2c_req_addr);
+
+	/* Write command register to trigger processing */
+	cmd_reg = FIELD_PREP(PSP_MBOX_FIELDS_CMD, PSP_I2C_REQ_BUS_CMD);
+	writel(cmd_reg, &mbox->cmd_fields);
+
+	if (psp_wait_cmd(mbox))
+		return -ETIMEDOUT;
+
+	if (psp_check_mbox_sts(mbox))
+		return -EIO;
+
+	return 0;
+}
+
+/* Helper to verify status returned by PSP */
+static int check_i2c_req_sts(struct psp_i2c_req *req)
+{
+	u32 status;
+
+	/* Status field in command-response buffer is updated by PSP */
+	status = READ_ONCE(req->hdr.status);
+
+	switch (status) {
+	case PSP_I2C_REQ_STS_OK:
+		return 0;
+	case PSP_I2C_REQ_STS_BUS_BUSY:
+		return -EBUSY;
+	case PSP_I2C_REQ_STS_INV_PARAM:
+	default:
+		return -EIO;
+	}
+}
+
+static int psp_send_check_i2c_req(struct psp_i2c_req *req)
+{
+	/*
+	 * Errors in x86-PSP i2c-arbitration protocol may occur at two levels:
+	 * 1. mailbox communication - PSP is not operational or some IO errors
+	 * with basic communication had happened;
+	 * 2. i2c-requests - PSP refuses to grant i2c arbitration to x86 for too
+	 * long.
+	 * In order to distinguish between these two in error handling code, all
+	 * errors on the first level (returned by psp_send_cmd) are shadowed by
+	 * -EIO.
+	 */
+	if (psp_send_cmd(req))
+		return -EIO;
+
+	return check_i2c_req_sts(req);
+}
+
+static int psp_send_i2c_req(enum psp_i2c_req_type i2c_req_type)
+{
+	struct psp_i2c_req *req;
+	unsigned long start;
+	int status, ret;
+
+	/* Allocate command-response buffer */
+	req = kzalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	req->hdr.total_size = sizeof(*req);
+	req->type = i2c_req_type;
+
+	start = jiffies;
+	ret = read_poll_timeout(psp_send_check_i2c_req, status,
+				(status != -EBUSY),
+				PSP_I2C_REQ_RETRY_DELAY_US,
+				PSP_I2C_REQ_RETRY_CNT * PSP_I2C_REQ_RETRY_DELAY_US,
+				0, req);
+	if (ret) {
+		dev_err(psp_i2c_dev, "Timed out waiting for PSP to %s I2C bus\n",
+			(i2c_req_type == PSP_I2C_REQ_ACQUIRE) ?
+			"release" : "acquire");
+		goto cleanup;
+	}
+
+	ret = status;
+	if (ret) {
+		dev_err(psp_i2c_dev, "PSP communication error\n");
+		goto cleanup;
+	}
+
+	dev_dbg(psp_i2c_dev, "Request accepted by PSP after %ums\n",
+		jiffies_to_msecs(jiffies - start));
+
+cleanup:
+	if (ret) {
+		dev_err(psp_i2c_dev, "Assume i2c bus is for exclusive host usage\n");
+		psp_i2c_mbox_fail = true;
+	}
+
+	kfree(req);
+	return ret;
+}
+
+static int psp_acquire_i2c_bus(void)
+{
+	int status;
+
+	mutex_lock(&psp_i2c_access_mutex);
+
+	/* Return early if mailbox malfunctioned */
+	if (psp_i2c_mbox_fail)
+		goto cleanup;
+
+	/*
+	 * Simply increment usage counter and return if PSP semaphore was
+	 * already taken by kernel.
+	 */
+	if (psp_i2c_access_count) {
+		psp_i2c_access_count++;
+		goto cleanup;
+	}
+
+	status = psp_send_i2c_req(PSP_I2C_REQ_ACQUIRE);
+	if (status)
+		goto cleanup;
+
+	psp_i2c_sem_acquired = jiffies;
+	psp_i2c_access_count++;
+
+	/*
+	 * In case of errors with PSP arbitrator psp_i2c_mbox_fail variable is
+	 * set above. As a consequence consecutive calls to acquire will bypass
+	 * communication with PSP. At any case i2c bus is granted to the caller,
+	 * thus always return success.
+	 */
+cleanup:
+	mutex_unlock(&psp_i2c_access_mutex);
+	return 0;
+}
+
+static void psp_release_i2c_bus(void)
+{
+	int status;
+
+	mutex_lock(&psp_i2c_access_mutex);
+
+	/* Return early if mailbox was malfunctional */
+	if (psp_i2c_mbox_fail)
+		goto cleanup;
+
+	/*
+	 * If we are last owner of PSP semaphore, need to release aribtration
+	 * via mailbox.
+	 */
+	psp_i2c_access_count--;
+	if (psp_i2c_access_count)
+		goto cleanup;
+
+	/* Send a release command to PSP */
+	status = psp_send_i2c_req(PSP_I2C_REQ_RELEASE);
+	if (status)
+		goto cleanup;
+
+	dev_dbg(psp_i2c_dev, "PSP semaphore held for %ums\n",
+		jiffies_to_msecs(jiffies - psp_i2c_sem_acquired));
+
+cleanup:
+	mutex_unlock(&psp_i2c_access_mutex);
+}
+
+/*
+ * Locking methods are based on the default implementation from
+ * drivers/i2c/i2c-core-base.c, but with psp acquire and release operations
+ * added. With this in place we can ensure that i2c clients on the bus shared
+ * with psp are able to lock HW access to the bus for arbitrary number of
+ * operations - that is e.g. write-wait-read.
+ */
+static void i2c_adapter_dw_psp_lock_bus(struct i2c_adapter *adapter,
+					unsigned int flags)
+{
+	psp_acquire_i2c_bus();
+	rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter));
+}
+
+static int i2c_adapter_dw_psp_trylock_bus(struct i2c_adapter *adapter,
+					  unsigned int flags)
+{
+	int ret;
+
+	ret = rt_mutex_trylock(&adapter->bus_lock);
+	if (ret)
+		return ret;
+
+	psp_acquire_i2c_bus();
+
+	return ret;
+}
+
+static void i2c_adapter_dw_psp_unlock_bus(struct i2c_adapter *adapter,
+					  unsigned int flags)
+{
+	psp_release_i2c_bus();
+	rt_mutex_unlock(&adapter->bus_lock);
+}
+
+static const struct i2c_lock_operations i2c_dw_psp_lock_ops = {
+	.lock_bus = i2c_adapter_dw_psp_lock_bus,
+	.trylock_bus = i2c_adapter_dw_psp_trylock_bus,
+	.unlock_bus = i2c_adapter_dw_psp_unlock_bus,
+};
+
+int i2c_dw_amdpsp_probe_lock_support(struct dw_i2c_dev *dev)
+{
+	int ret;
+
+	if (!dev)
+		return -ENODEV;
+
+	if (!(dev->flags & ARBITRATION_SEMAPHORE))
+		return -ENODEV;
+
+	/* Allow to bind only one instance of a driver */
+	if (psp_i2c_dev)
+		return -EEXIST;
+
+	psp_i2c_dev = dev->dev;
+
+	ret = psp_mbox_probe();
+	if (ret)
+		return ret;
+
+	dev_info(psp_i2c_dev, "I2C bus managed by AMD PSP\n");
+
+	/*
+	 * Install global locking callbacks for adapter as well as internal i2c
+	 * controller locks.
+	 */
+	dev->adapter.lock_ops = &i2c_dw_psp_lock_ops;
+	dev->acquire_lock = psp_acquire_i2c_bus;
+	dev->release_lock = psp_release_i2c_bus;
+
+	return 0;
+}
+
+/* Unmap area used as a mailbox with PSP */
+void i2c_dw_amdpsp_remove_lock_support(struct dw_i2c_dev *dev)
+{
+	iounmap(mbox_iomem);
+}

drivers/i2c/busses/i2c-designware-baytrail.c

@@ -12,25 +12,25 @@
 
 #include "i2c-designware-core.h"
 
-int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
+int i2c_dw_baytrail_probe_lock_support(struct dw_i2c_dev *dev)
 {
 	acpi_status status;
 	unsigned long long shared_host = 0;
 	acpi_handle handle;
 
-	if (!dev || !dev->dev)
-		return 0;
+	if (!dev)
+		return -ENODEV;
 
 	handle = ACPI_HANDLE(dev->dev);
 	if (!handle)
-		return 0;
+		return -ENODEV;
 
 	status = acpi_evaluate_integer(handle, "_SEM", NULL, &shared_host);
 	if (ACPI_FAILURE(status))
-		return 0;
+		return -ENODEV;
 
 	if (!shared_host)
-		return 0;
+		return -ENODEV;
 
 	if (!iosf_mbi_available())
 		return -EPROBE_DEFER;

drivers/i2c/busses/i2c-designware-common.c

@@ -578,7 +578,12 @@ int i2c_dw_set_fifo_size(struct dw_i2c_dev *dev)
 	 * Try to detect the FIFO depth if not set by interface driver,
 	 * the depth could be from 2 to 256 from HW spec.
 	 */
+	ret = i2c_dw_acquire_lock(dev);
+	if (ret)
+		return ret;
+
 	ret = regmap_read(dev->map, DW_IC_COMP_PARAM_1, &param);
+	i2c_dw_release_lock(dev);
 	if (ret)
 		return ret;
 
@@ -607,6 +612,11 @@ u32 i2c_dw_func(struct i2c_adapter *adap)
 void i2c_dw_disable(struct dw_i2c_dev *dev)
 {
 	u32 dummy;
+	int ret;
+
+	ret = i2c_dw_acquire_lock(dev);
+	if (ret)
+		return;
 
 	/* Disable controller */
 	__i2c_dw_disable(dev);
@@ -614,6 +624,8 @@ void i2c_dw_disable(struct dw_i2c_dev *dev)
 	/* Disable all interrupts */
 	regmap_write(dev->map, DW_IC_INTR_MASK, 0);
 	regmap_read(dev->map, DW_IC_CLR_INTR, &dummy);
+
+	i2c_dw_release_lock(dev);
 }
 
 void i2c_dw_disable_int(struct dw_i2c_dev *dev)

drivers/i2c/busses/i2c-designware-core.h

@@ -227,6 +227,8 @@ struct reset_control;
  * @hs_lcnt: high speed LCNT value
  * @acquire_lock: function to acquire a hardware lock on the bus
  * @release_lock: function to release a hardware lock on the bus
+ * @semaphore_idx: Index of table with semaphore type attached to the bus. It's
+ *	-1 if there is no semaphore.
  * @shared_with_punit: true if this bus is shared with the SoCs PUNIT
  * @disable: function to disable the controller
  * @disable_int: function to disable all interrupts
@@ -234,7 +236,6 @@ struct reset_control;
  * @set_sda_hold_time: callback to retrieve IP specific SDA hold timing
  * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE
  * @rinfo: I²C GPIO recovery information
- * @suspended: set to true if the controller is suspended
  *
  * HCNT and LCNT parameters can be used if the platform knows more accurate
  * values than the one computed based only on the input clock frequency.
@@ -285,6 +286,7 @@ struct dw_i2c_dev {
 	u16			hs_lcnt;
 	int			(*acquire_lock)(void);
 	void			(*release_lock)(void);
+	int			semaphore_idx;
 	bool			shared_with_punit;
 	void			(*disable)(struct dw_i2c_dev *dev);
 	void			(*disable_int)(struct dw_i2c_dev *dev);
@@ -292,11 +294,11 @@ struct dw_i2c_dev {
 	int			(*set_sda_hold_time)(struct dw_i2c_dev *dev);
 	int			mode;
 	struct i2c_bus_recovery_info rinfo;
-	bool			suspended;
 };
 
 #define ACCESS_INTR_MASK	BIT(0)
 #define ACCESS_NO_IRQ_SUSPEND	BIT(1)
+#define ARBITRATION_SEMAPHORE	BIT(2)
 
 #define MODEL_MSCC_OCELOT	BIT(8)
 #define MODEL_BAIKAL_BT1	BIT(9)
@@ -310,6 +312,11 @@ struct dw_i2c_dev {
 #define AMD_UCSI_INTR_REG	0x474
 #define AMD_UCSI_INTR_EN	0xd
 
+struct i2c_dw_semaphore_callbacks {
+	int	(*probe)(struct dw_i2c_dev *dev);
+	void	(*remove)(struct dw_i2c_dev *dev);
+};
+
 int i2c_dw_init_regmap(struct dw_i2c_dev *dev);
 u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset);
 u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset);
@@ -370,9 +377,12 @@ static inline void i2c_dw_configure(struct dw_i2c_dev *dev)
 }
 
 #if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL)
-extern int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev);
-#else
-static inline int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev) { return 0; }
+int i2c_dw_baytrail_probe_lock_support(struct dw_i2c_dev *dev);
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_AMDPSP)
+int i2c_dw_amdpsp_probe_lock_support(struct dw_i2c_dev *dev);
+void i2c_dw_amdpsp_remove_lock_support(struct dw_i2c_dev *dev);
 #endif
 
 int i2c_dw_validate_speed(struct dw_i2c_dev *dev);

drivers/i2c/busses/i2c-designware-master.c

@@ -567,11 +567,6 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 		goto done_nolock;
 	}
 
-	if (dev_WARN_ONCE(dev->dev, dev->suspended, "Transfer while suspended\n")) {
-		ret = -ESHUTDOWN;
-		goto done_nolock;
-	}
-
 	reinit_completion(&dev->cmd_complete);
 	dev->msgs = msgs;
 	dev->msgs_num = num;
@@ -905,7 +900,13 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev)
 		irq_flags = IRQF_SHARED | IRQF_COND_SUSPEND;
 	}
 
+	ret = i2c_dw_acquire_lock(dev);
+	if (ret)
+		return ret;
+
 	i2c_dw_disable_int(dev);
+	i2c_dw_release_lock(dev);
+
 	ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags,
 			       dev_name(dev->dev), dev);
 	if (ret) {

drivers/i2c/busses/i2c-designware-pcidrv.c

@@ -24,6 +24,7 @@
 #include <linux/slab.h>
 
 #include "i2c-designware-core.h"
+#include "i2c-ccgx-ucsi.h"
 
 #define DRIVER_NAME "i2c-designware-pci"
 #define AMD_CLK_RATE_HZ	100000
@@ -125,26 +126,6 @@ static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
 	return -ENODEV;
 }
 
- /*
-  * TODO find a better way how to deduplicate instantiation
-  * of USB PD slave device from nVidia GPU driver.
-  */
-static int navi_amd_register_client(struct dw_i2c_dev *dev)
-{
-	struct i2c_board_info	info;
-
-	memset(&info, 0, sizeof(struct i2c_board_info));
-	strscpy(info.type, "ccgx-ucsi", I2C_NAME_SIZE);
-	info.addr = 0x08;
-	info.irq = dev->irq;
-
-	dev->slave = i2c_new_client_device(&dev->adapter, &info);
-	if (IS_ERR(dev->slave))
-		return PTR_ERR(dev->slave);
-
-	return 0;
-}
-
 static int navi_amd_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
 {
 	struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev);
@@ -213,29 +194,46 @@ static struct dw_pci_controller dw_pci_controllers[] = {
 	},
 };
 
-static int __maybe_unused i2c_dw_pci_suspend(struct device *dev)
+static int __maybe_unused i2c_dw_pci_runtime_suspend(struct device *dev)
 {
 	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
 
-	i_dev->suspended = true;
 	i_dev->disable(i_dev);
-
 	return 0;
 }
 
+static int __maybe_unused i2c_dw_pci_suspend(struct device *dev)
+{
+	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
+
+	i2c_mark_adapter_suspended(&i_dev->adapter);
+
+	return i2c_dw_pci_runtime_suspend(dev);
+}
+
+static int __maybe_unused i2c_dw_pci_runtime_resume(struct device *dev)
+{
+	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
+
+	return i_dev->init(i_dev);
+}
+
 static int __maybe_unused i2c_dw_pci_resume(struct device *dev)
 {
 	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
 	int ret;
 
-	ret = i_dev->init(i_dev);
-	i_dev->suspended = false;
+	ret = i2c_dw_pci_runtime_resume(dev);
+
+	i2c_mark_adapter_resumed(&i_dev->adapter);
 
 	return ret;
 }
 
-static UNIVERSAL_DEV_PM_OPS(i2c_dw_pm_ops, i2c_dw_pci_suspend,
-			    i2c_dw_pci_resume, NULL);
+static const struct dev_pm_ops i2c_dw_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(i2c_dw_pci_suspend, i2c_dw_pci_resume)
+	SET_RUNTIME_PM_OPS(i2c_dw_pci_runtime_suspend, i2c_dw_pci_runtime_resume, NULL)
+};
 
 static int i2c_dw_pci_probe(struct pci_dev *pdev,
 			    const struct pci_device_id *id)
@@ -325,11 +323,10 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev,
 	}
 
 	if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU) {
-		r = navi_amd_register_client(dev);
-		if (r) {
-			dev_err(dev->dev, "register client failed with %d\n", r);
-			return r;
-		}
+		dev->slave = i2c_new_ccgx_ucsi(&dev->adapter, dev->irq, NULL);
+		if (IS_ERR(dev->slave))
+			return dev_err_probe(dev->dev, PTR_ERR(dev->slave),
+					     "register UCSI failed\n");
 	}
 
 	pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);

drivers/i2c/busses/i2c-designware-platdrv.c

@@ -50,6 +50,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = {
 	{ "808622C1", ACCESS_NO_IRQ_SUSPEND },
 	{ "AMD0010", ACCESS_INTR_MASK },
 	{ "AMDI0010", ACCESS_INTR_MASK },
+	{ "AMDI0019", ACCESS_INTR_MASK | ARBITRATION_SEMAPHORE },
 	{ "AMDI0510", 0 },
 	{ "APMC0D0F", 0 },
 	{ "HISI02A1", 0 },
@@ -204,6 +205,63 @@ static const struct dmi_system_id dw_i2c_hwmon_class_dmi[] = {
 	{ } /* terminate list */
 };
 
+static const struct i2c_dw_semaphore_callbacks i2c_dw_semaphore_cb_table[] = {
+#ifdef CONFIG_I2C_DESIGNWARE_BAYTRAIL
+	{
+		.probe = i2c_dw_baytrail_probe_lock_support,
+	},
+#endif
+#ifdef CONFIG_I2C_DESIGNWARE_AMDPSP
+	{
+		.probe = i2c_dw_amdpsp_probe_lock_support,
+		.remove = i2c_dw_amdpsp_remove_lock_support,
+	},
+#endif
+	{}
+};
+
+static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
+{
+	const struct i2c_dw_semaphore_callbacks *ptr;
+	int i = 0;
+	int ret;
+
+	ptr = i2c_dw_semaphore_cb_table;
+
+	dev->semaphore_idx = -1;
+
+	while (ptr->probe) {
+		ret = ptr->probe(dev);
+		if (ret) {
+			/*
+			 * If there is no semaphore device attached to this
+			 * controller, we shouldn't abort general i2c_controller
+			 * probe.
+			 */
+			if (ret != -ENODEV)
+				return ret;
+
+			i++;
+			ptr++;
+			continue;
+		}
+
+		dev->semaphore_idx = i;
+		break;
+	}
+
+	return 0;
+}
+
+static void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev)
+{
+	if (dev->semaphore_idx < 0)
+		return;
+
+	if (i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove)
+		i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove(dev);
+}
+
 static int dw_i2c_plat_probe(struct platform_device *pdev)
 {
 	struct i2c_adapter *adap;
@@ -334,6 +392,8 @@ static int dw_i2c_plat_remove(struct platform_device *pdev)
 	pm_runtime_put_sync(&pdev->dev);
 	dw_i2c_plat_pm_cleanup(dev);
 
+	i2c_dw_remove_lock_support(dev);
+
 	reset_control_assert(dev->rst);
 
 	return 0;
@@ -368,12 +428,10 @@ static void dw_i2c_plat_complete(struct device *dev)
 #endif
 
 #ifdef CONFIG_PM
-static int dw_i2c_plat_suspend(struct device *dev)
+static int dw_i2c_plat_runtime_suspend(struct device *dev)
 {
 	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
 
-	i_dev->suspended = true;
-
 	if (i_dev->shared_with_punit)
 		return 0;
 
@@ -383,7 +441,16 @@ static int dw_i2c_plat_suspend(struct device *dev)
 	return 0;
 }
 
-static int dw_i2c_plat_resume(struct device *dev)
+static int __maybe_unused dw_i2c_plat_suspend(struct device *dev)
+{
+	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
+
+	i2c_mark_adapter_suspended(&i_dev->adapter);
+
+	return dw_i2c_plat_runtime_suspend(dev);
+}
+
+static int dw_i2c_plat_runtime_resume(struct device *dev)
 {
 	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
 
@@ -391,7 +458,16 @@ static int dw_i2c_plat_resume(struct device *dev)
 		i2c_dw_prepare_clk(i_dev, true);
 
 	i_dev->init(i_dev);
-	i_dev->suspended = false;
+
+	return 0;
+}
+
+static int __maybe_unused dw_i2c_plat_resume(struct device *dev)
+{
+	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
+
+	dw_i2c_plat_runtime_resume(dev);
+	i2c_mark_adapter_resumed(&i_dev->adapter);
 
 	return 0;
 }
@@ -400,7 +476,7 @@ static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
 	.prepare = dw_i2c_plat_prepare,
 	.complete = dw_i2c_plat_complete,
 	SET_LATE_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume)
-	SET_RUNTIME_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume, NULL)
+	SET_RUNTIME_PM_OPS(dw_i2c_plat_runtime_suspend, dw_i2c_plat_runtime_resume, NULL)
 };
 
 #define DW_I2C_DEV_PMOPS (&dw_i2c_dev_pm_ops)

drivers/i2c/busses/i2c-i801.c

@@ -75,6 +75,7 @@
  * Alder Lake-S (PCH)		0x7aa3	32	hard	yes	yes	yes
  * Alder Lake-P (PCH)		0x51a3	32	hard	yes	yes	yes
  * Alder Lake-M (PCH)		0x54a3	32	hard	yes	yes	yes
+ * Raptor Lake-S (PCH)		0x7a23	32	hard	yes	yes	yes
  *
  * Features supported by this driver:
  * Software PEC				no
@@ -165,7 +166,7 @@
 #define I801_BYTE		0x04
 #define I801_BYTE_DATA		0x08
 #define I801_WORD_DATA		0x0C
-#define I801_PROC_CALL		0x10	/* unimplemented */
+#define I801_PROC_CALL		0x10
 #define I801_BLOCK_DATA		0x14
 #define I801_I2C_BLOCK_DATA	0x18	/* ICH5 and later */
 #define I801_BLOCK_PROC_CALL	0x1C
@@ -228,6 +229,7 @@
 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS		0x51a3
 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_M_SMBUS		0x54a3
 #define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS		0x5ad4
+#define PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_S_SMBUS		0x7a23
 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS		0x7aa3
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS		0x8c22
 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS		0x8ca2
@@ -362,9 +364,6 @@ static int i801_check_post(struct i801_priv *priv, int status)
 
 	/*
 	 * If the SMBus is still busy, we give up
-	 * Note: This timeout condition only happens when using polling
-	 * transactions.  For interrupt operation, NAK/timeout is indicated by
-	 * DEV_ERR.
 	 */
 	if (unlikely(status < 0)) {
 		dev_err(&priv->pci_dev->dev, "Transaction timeout\n");
@@ -473,8 +472,6 @@ static int i801_transaction(struct i801_priv *priv, int xact)
 		return i801_check_post(priv, result ? priv->status : -ETIMEDOUT);
 	}
 
-	/* the current contents of SMBHSTCNT can be overwritten, since PEC,
-	 * SMBSCMD are passed in xact */
 	outb_p(xact | SMBHSTCNT_START, SMBHSTCNT(priv));
 
 	status = i801_wait_intr(priv);
@@ -790,7 +787,7 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
 {
 	int hwpec;
 	int block = 0;
-	int ret = 0, xact = 0;
+	int ret, xact;
 	struct i801_priv *priv = i2c_get_adapdata(adap);
 
 	mutex_lock(&priv->acpi_lock);
@@ -836,6 +833,14 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
 		}
 		xact = I801_WORD_DATA;
 		break;
+	case I2C_SMBUS_PROC_CALL:
+		outb_p((addr & 0x7f) << 1, SMBHSTADD(priv));
+		outb_p(command, SMBHSTCMD(priv));
+		outb_p(data->word & 0xff, SMBHSTDAT0(priv));
+		outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
+		xact = I801_PROC_CALL;
+		read_write = I2C_SMBUS_READ;
+		break;
 	case I2C_SMBUS_BLOCK_DATA:
 		outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
 		       SMBHSTADD(priv));
@@ -902,12 +907,13 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
 	if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
 		goto out;
 
-	switch (xact & 0x7f) {
+	switch (xact) {
 	case I801_BYTE:	/* Result put in SMBHSTDAT0 */
 	case I801_BYTE_DATA:
 		data->byte = inb_p(SMBHSTDAT0(priv));
 		break;
 	case I801_WORD_DATA:
+	case I801_PROC_CALL:
 		data->word = inb_p(SMBHSTDAT0(priv)) +
 			     (inb_p(SMBHSTDAT1(priv)) << 8);
 		break;
@@ -933,6 +939,7 @@ static u32 i801_func(struct i2c_adapter *adapter)
 
 	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
 	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	       I2C_FUNC_SMBUS_PROC_CALL |
 	       I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
 	       ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
 	       ((priv->features & FEATURE_BLOCK_PROC) ?
@@ -1041,6 +1048,7 @@ static const struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE_DATA(INTEL, ALDER_LAKE_S_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_CNL) },
 	{ PCI_DEVICE_DATA(INTEL, ALDER_LAKE_P_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_CNL) },
 	{ PCI_DEVICE_DATA(INTEL, ALDER_LAKE_M_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_CNL) },
+	{ PCI_DEVICE_DATA(INTEL, RAPTOR_LAKE_S_SMBUS,	FEATURES_ICH5 | FEATURE_TCO_CNL) },
 	{ 0, }
 };
 

drivers/i2c/busses/i2c-meson.c

@@ -465,18 +465,18 @@ static int meson_i2c_probe(struct platform_device *pdev)
 	 */
 	meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, 0);
 
-	ret = i2c_add_adapter(&i2c->adap);
-	if (ret < 0) {
-		clk_disable_unprepare(i2c->clk);
-		return ret;
-	}
-
 	/* Disable filtering */
 	meson_i2c_set_mask(i2c, REG_SLAVE_ADDR,
 			   REG_SLV_SDA_FILTER | REG_SLV_SCL_FILTER, 0);
 
 	meson_i2c_set_clk_div(i2c, timings.bus_freq_hz);
 
+	ret = i2c_add_adapter(&i2c->adap);
+	if (ret < 0) {
+		clk_disable_unprepare(i2c->clk);
+		return ret;
+	}
+
 	return 0;
 }
 

drivers/i2c/busses/i2c-npcm7xx.c

@@ -781,7 +781,7 @@ static void npcm_i2c_set_fifo(struct npcm_i2c *bus, int nread, int nwrite)
 		/*
 		 * if we are about to read the first byte in blk rd mode,
 		 * don't NACK it. If slave returns zero size HW can't NACK
-		 * it immidiattly, it will read extra byte and then NACK.
+		 * it immediately, it will read extra byte and then NACK.
 		 */
 		if (bus->rd_ind == 0 && bus->read_block_use) {
 			/* set fifo to read one byte, no last: */
@@ -981,7 +981,7 @@ static void npcm_i2c_slave_xmit(struct npcm_i2c *bus, u16 nwrite,
 /*
  * npcm_i2c_slave_wr_buf_sync:
  * currently slave IF only supports single byte operations.
- * in order to utilyze the npcm HW FIFO, the driver will ask for 16 bytes
+ * in order to utilize the npcm HW FIFO, the driver will ask for 16 bytes
  * at a time, pack them in buffer, and then transmit them all together
  * to the FIFO and onward to the bus.
  * NACK on read will be once reached to bus->adap->quirks->max_read_len.
@@ -1175,7 +1175,7 @@ static irqreturn_t npcm_i2c_int_slave_handler(struct npcm_i2c *bus)
 				/*
 				 * the i2c module can response to 10 own SA.
 				 * check which one was addressed by the master.
-				 * repond to the first one.
+				 * respond to the first one.
 				 */
 				addr = ((i2ccst3 & 0x07) << 7) |
 					(i2ccst2 & 0x7F);
@@ -1753,8 +1753,8 @@ static void npcm_i2c_recovery_init(struct i2c_adapter *_adap)
 	/*
 	 * npcm i2c HW allows direct reading of SCL and SDA.
 	 * However, it does not support setting SCL and SDA directly.
-	 * The recovery function can togle SCL when SDA is low (but not set)
-	 * Getter functions used internally, and can be used externaly.
+	 * The recovery function can toggle SCL when SDA is low (but not set)
+	 * Getter functions used internally, and can be used externally.
 	 */
 	rinfo->get_scl = npcm_i2c_get_SCL;
 	rinfo->get_sda = npcm_i2c_get_SDA;
@@ -1768,10 +1768,10 @@ static void npcm_i2c_recovery_init(struct i2c_adapter *_adap)
 
 /*
  * npcm_i2c_init_clk: init HW timing parameters.
- * NPCM7XX i2c module timing parameters are depenent on module core clk (APB)
+ * NPCM7XX i2c module timing parameters are dependent on module core clk (APB)
  * and bus frequency.
- * 100kHz bus requires tSCL = 4 * SCLFRQ * tCLK. LT and HT are simetric.
- * 400kHz bus requires assymetric HT and LT. A different equation is recomended
+ * 100kHz bus requires tSCL = 4 * SCLFRQ * tCLK. LT and HT are symmetric.
+ * 400kHz bus requires asymmetric HT and LT. A different equation is recommended
  * by the HW designer, given core clock range (equations in comments below).
  *
  */

drivers/i2c/busses/i2c-nvidia-gpu.c

@@ -17,6 +17,8 @@
 
 #include <asm/unaligned.h>
 
+#include "i2c-ccgx-ucsi.h"
+
 /* I2C definitions */
 #define I2C_MST_CNTL				0x00
 #define I2C_MST_CNTL_GEN_START			BIT(0)
@@ -266,54 +268,32 @@ static const struct software_node ccgx_node = {
 	.properties = ccgx_props,
 };
 
-static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq)
-{
-	i2cd->gpu_ccgx_ucsi = devm_kzalloc(i2cd->dev,
-					   sizeof(*i2cd->gpu_ccgx_ucsi),
-					   GFP_KERNEL);
-	if (!i2cd->gpu_ccgx_ucsi)
-		return -ENOMEM;
-
-	strlcpy(i2cd->gpu_ccgx_ucsi->type, "ccgx-ucsi",
-		sizeof(i2cd->gpu_ccgx_ucsi->type));
-	i2cd->gpu_ccgx_ucsi->addr = 0x8;
-	i2cd->gpu_ccgx_ucsi->irq = irq;
-	i2cd->gpu_ccgx_ucsi->swnode = &ccgx_node;
-	i2cd->ccgx_client = i2c_new_client_device(&i2cd->adapter, i2cd->gpu_ccgx_ucsi);
-	return PTR_ERR_OR_ZERO(i2cd->ccgx_client);
-}
-
 static int gpu_i2c_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
+	struct device *dev = &pdev->dev;
 	struct gpu_i2c_dev *i2cd;
 	int status;
 
-	i2cd = devm_kzalloc(&pdev->dev, sizeof(*i2cd), GFP_KERNEL);
+	i2cd = devm_kzalloc(dev, sizeof(*i2cd), GFP_KERNEL);
 	if (!i2cd)
 		return -ENOMEM;
 
-	i2cd->dev = &pdev->dev;
-	dev_set_drvdata(&pdev->dev, i2cd);
+	i2cd->dev = dev;
+	dev_set_drvdata(dev, i2cd);
 
 	status = pcim_enable_device(pdev);
-	if (status < 0) {
-		dev_err(&pdev->dev, "pcim_enable_device failed %d\n", status);
-		return status;
-	}
+	if (status < 0)
+		return dev_err_probe(dev, status, "pcim_enable_device failed\n");
 
 	pci_set_master(pdev);
 
 	i2cd->regs = pcim_iomap(pdev, 0, 0);
-	if (!i2cd->regs) {
-		dev_err(&pdev->dev, "pcim_iomap failed\n");
-		return -ENOMEM;
-	}
+	if (!i2cd->regs)
+		return dev_err_probe(dev, -ENOMEM, "pcim_iomap failed\n");
 
 	status = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
-	if (status < 0) {
-		dev_err(&pdev->dev, "pci_alloc_irq_vectors err %d\n", status);
-		return status;
-	}
+	if (status < 0)
+		return dev_err_probe(dev, status, "pci_alloc_irq_vectors err\n");
 
 	gpu_enable_i2c_bus(i2cd);
 
@@ -323,21 +303,21 @@ static int gpu_i2c_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		sizeof(i2cd->adapter.name));
 	i2cd->adapter.algo = &gpu_i2c_algorithm;
 	i2cd->adapter.quirks = &gpu_i2c_quirks;
-	i2cd->adapter.dev.parent = &pdev->dev;
+	i2cd->adapter.dev.parent = dev;
 	status = i2c_add_adapter(&i2cd->adapter);
 	if (status < 0)
 		goto free_irq_vectors;
 
-	status = gpu_populate_client(i2cd, pdev->irq);
-	if (status < 0) {
-		dev_err(&pdev->dev, "gpu_populate_client failed %d\n", status);
+	i2cd->ccgx_client = i2c_new_ccgx_ucsi(&i2cd->adapter, pdev->irq, &ccgx_node);
+	if (IS_ERR(i2cd->ccgx_client)) {
+		status = dev_err_probe(dev, PTR_ERR(i2cd->ccgx_client), "register UCSI failed\n");
 		goto del_adapter;
 	}
 
-	pm_runtime_set_autosuspend_delay(&pdev->dev, 3000);
-	pm_runtime_use_autosuspend(&pdev->dev);
-	pm_runtime_put_autosuspend(&pdev->dev);
-	pm_runtime_allow(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(dev, 3000);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_put_autosuspend(dev);
+	pm_runtime_allow(dev);
 
 	return 0;
 
@@ -350,7 +330,7 @@ static int gpu_i2c_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 static void gpu_i2c_remove(struct pci_dev *pdev)
 {
-	struct gpu_i2c_dev *i2cd = dev_get_drvdata(&pdev->dev);
+	struct gpu_i2c_dev *i2cd = pci_get_drvdata(pdev);
 
 	pm_runtime_get_noresume(i2cd->dev);
 	i2c_del_adapter(&i2cd->adapter);

drivers/i2c/busses/i2c-pasemi-core.c

@@ -333,7 +333,6 @@ int pasemi_i2c_common_probe(struct pasemi_smbus *smbus)
 	smbus->adapter.owner = THIS_MODULE;
 	snprintf(smbus->adapter.name, sizeof(smbus->adapter.name),
 		 "PA Semi SMBus adapter (%s)", dev_name(smbus->dev));
-	smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	smbus->adapter.algo = &smbus_algorithm;
 	smbus->adapter.algo_data = smbus;
 

drivers/i2c/busses/i2c-pasemi-pci.c

@@ -56,6 +56,7 @@ static int pasemi_smb_pci_probe(struct pci_dev *dev,
 	if (!smbus->ioaddr)
 		return -EBUSY;
 
+	smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	error = pasemi_i2c_common_probe(smbus);
 	if (error)
 		return error;

drivers/i2c/busses/i2c-piix4.c

@@ -77,6 +77,7 @@
 
 /* SB800 constants */
 #define SB800_PIIX4_SMB_IDX		0xcd6
+#define SB800_PIIX4_SMB_MAP_SIZE	2
 
 #define KERNCZ_IMC_IDX			0x3e
 #define KERNCZ_IMC_DATA			0x3f
@@ -97,6 +98,9 @@
 #define SB800_PIIX4_PORT_IDX_MASK_KERNCZ	0x18
 #define SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ	3
 
+#define SB800_PIIX4_FCH_PM_ADDR			0xFED80300
+#define SB800_PIIX4_FCH_PM_SIZE			8
+
 /* insmod parameters */
 
 /* If force is set to anything different from 0, we forcibly enable the
@@ -155,6 +159,12 @@ static const char *piix4_main_port_names_sb800[PIIX4_MAX_ADAPTERS] = {
 };
 static const char *piix4_aux_port_name_sb800 = " port 1";
 
+struct sb800_mmio_cfg {
+	void __iomem *addr;
+	struct resource *res;
+	bool use_mmio;
+};
+
 struct i2c_piix4_adapdata {
 	unsigned short smba;
 
@@ -162,8 +172,75 @@ struct i2c_piix4_adapdata {
 	bool sb800_main;
 	bool notify_imc;
 	u8 port;		/* Port number, shifted */
+	struct sb800_mmio_cfg mmio_cfg;
 };
 
+static int piix4_sb800_region_request(struct device *dev,
+				      struct sb800_mmio_cfg *mmio_cfg)
+{
+	if (mmio_cfg->use_mmio) {
+		struct resource *res;
+		void __iomem *addr;
+
+		res = request_mem_region_muxed(SB800_PIIX4_FCH_PM_ADDR,
+					       SB800_PIIX4_FCH_PM_SIZE,
+					       "sb800_piix4_smb");
+		if (!res) {
+			dev_err(dev,
+				"SMBus base address memory region 0x%x already in use.\n",
+				SB800_PIIX4_FCH_PM_ADDR);
+			return -EBUSY;
+		}
+
+		addr = ioremap(SB800_PIIX4_FCH_PM_ADDR,
+			       SB800_PIIX4_FCH_PM_SIZE);
+		if (!addr) {
+			release_resource(res);
+			dev_err(dev, "SMBus base address mapping failed.\n");
+			return -ENOMEM;
+		}
+
+		mmio_cfg->res = res;
+		mmio_cfg->addr = addr;
+
+		return 0;
+	}
+
+	if (!request_muxed_region(SB800_PIIX4_SMB_IDX, SB800_PIIX4_SMB_MAP_SIZE,
+				  "sb800_piix4_smb")) {
+		dev_err(dev,
+			"SMBus base address index region 0x%x already in use.\n",
+			SB800_PIIX4_SMB_IDX);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static void piix4_sb800_region_release(struct device *dev,
+				       struct sb800_mmio_cfg *mmio_cfg)
+{
+	if (mmio_cfg->use_mmio) {
+		iounmap(mmio_cfg->addr);
+		release_resource(mmio_cfg->res);
+		return;
+	}
+
+	release_region(SB800_PIIX4_SMB_IDX, SB800_PIIX4_SMB_MAP_SIZE);
+}
+
+static bool piix4_sb800_use_mmio(struct pci_dev *PIIX4_dev)
+{
+	/*
+	 * cd6h/cd7h port I/O accesses can be disabled on AMD processors
+	 * w/ SMBus PCI revision ID 0x51 or greater. MMIO is supported on
+	 * the same processors and is the recommended access method.
+	 */
+	return (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD &&
+		PIIX4_dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS &&
+		PIIX4_dev->revision >= 0x51);
+}
+
 static int piix4_setup(struct pci_dev *PIIX4_dev,
 		       const struct pci_device_id *id)
 {
@@ -263,12 +340,61 @@ static int piix4_setup(struct pci_dev *PIIX4_dev,
 	return piix4_smba;
 }
 
+static int piix4_setup_sb800_smba(struct pci_dev *PIIX4_dev,
+				  u8 smb_en,
+				  u8 aux,
+				  u8 *smb_en_status,
+				  unsigned short *piix4_smba)
+{
+	struct sb800_mmio_cfg mmio_cfg;
+	u8 smba_en_lo;
+	u8 smba_en_hi;
+	int retval;
+
+	mmio_cfg.use_mmio = piix4_sb800_use_mmio(PIIX4_dev);
+	retval = piix4_sb800_region_request(&PIIX4_dev->dev, &mmio_cfg);
+	if (retval)
+		return retval;
+
+	if (mmio_cfg.use_mmio) {
+		smba_en_lo = ioread8(mmio_cfg.addr);
+		smba_en_hi = ioread8(mmio_cfg.addr + 1);
+	} else {
+		outb_p(smb_en, SB800_PIIX4_SMB_IDX);
+		smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
+		outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX);
+		smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1);
+	}
+
+	piix4_sb800_region_release(&PIIX4_dev->dev, &mmio_cfg);
+
+	if (!smb_en) {
+		*smb_en_status = smba_en_lo & 0x10;
+		*piix4_smba = smba_en_hi << 8;
+		if (aux)
+			*piix4_smba |= 0x20;
+	} else {
+		*smb_en_status = smba_en_lo & 0x01;
+		*piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
+	}
+
+	if (!*smb_en_status) {
+		dev_err(&PIIX4_dev->dev,
+			"SMBus Host Controller not enabled!\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 			     const struct pci_device_id *id, u8 aux)
 {
 	unsigned short piix4_smba;
-	u8 smba_en_lo, smba_en_hi, smb_en, smb_en_status, port_sel;
+	u8 smb_en, smb_en_status, port_sel;
 	u8 i2ccfg, i2ccfg_offset = 0x10;
+	struct sb800_mmio_cfg mmio_cfg;
+	int retval;
 
 	/* SB800 and later SMBus does not support forcing address */
 	if (force || force_addr) {
@@ -290,35 +416,11 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 	else
 		smb_en = (aux) ? 0x28 : 0x2c;
 
-	if (!request_muxed_region(SB800_PIIX4_SMB_IDX, 2, "sb800_piix4_smb")) {
-		dev_err(&PIIX4_dev->dev,
-			"SMB base address index region 0x%x already in use.\n",
-			SB800_PIIX4_SMB_IDX);
-		return -EBUSY;
-	}
-
-	outb_p(smb_en, SB800_PIIX4_SMB_IDX);
-	smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
-	outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX);
-	smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1);
+	retval = piix4_setup_sb800_smba(PIIX4_dev, smb_en, aux, &smb_en_status,
+					&piix4_smba);
 
-	release_region(SB800_PIIX4_SMB_IDX, 2);
-
-	if (!smb_en) {
-		smb_en_status = smba_en_lo & 0x10;
-		piix4_smba = smba_en_hi << 8;
-		if (aux)
-			piix4_smba |= 0x20;
-	} else {
-		smb_en_status = smba_en_lo & 0x01;
-		piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
-	}
-
-	if (!smb_en_status) {
-		dev_err(&PIIX4_dev->dev,
-			"SMBus Host Controller not enabled!\n");
-		return -ENODEV;
-	}
+	if (retval)
+		return retval;
 
 	if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
 		return -ENODEV;
@@ -371,10 +473,11 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 			piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT;
 		}
 	} else {
-		if (!request_muxed_region(SB800_PIIX4_SMB_IDX, 2,
-					  "sb800_piix4_smb")) {
+		mmio_cfg.use_mmio = piix4_sb800_use_mmio(PIIX4_dev);
+		retval = piix4_sb800_region_request(&PIIX4_dev->dev, &mmio_cfg);
+		if (retval) {
 			release_region(piix4_smba, SMBIOSIZE);
-			return -EBUSY;
+			return retval;
 		}
 
 		outb_p(SB800_PIIX4_PORT_IDX_SEL, SB800_PIIX4_SMB_IDX);
@@ -384,7 +487,7 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 				       SB800_PIIX4_PORT_IDX;
 		piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK;
 		piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT;
-		release_region(SB800_PIIX4_SMB_IDX, 2);
+		piix4_sb800_region_release(&PIIX4_dev->dev, &mmio_cfg);
 	}
 
 	dev_info(&PIIX4_dev->dev,
@@ -662,6 +765,29 @@ static void piix4_imc_wakeup(void)
 	release_region(KERNCZ_IMC_IDX, 2);
 }
 
+static int piix4_sb800_port_sel(u8 port, struct sb800_mmio_cfg *mmio_cfg)
+{
+	u8 smba_en_lo, val;
+
+	if (mmio_cfg->use_mmio) {
+		smba_en_lo = ioread8(mmio_cfg->addr + piix4_port_sel_sb800);
+		val = (smba_en_lo & ~piix4_port_mask_sb800) | port;
+		if (smba_en_lo != val)
+			iowrite8(val, mmio_cfg->addr + piix4_port_sel_sb800);
+
+		return (smba_en_lo & piix4_port_mask_sb800);
+	}
+
+	outb_p(piix4_port_sel_sb800, SB800_PIIX4_SMB_IDX);
+	smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
+
+	val = (smba_en_lo & ~piix4_port_mask_sb800) | port;
+	if (smba_en_lo != val)
+		outb_p(val, SB800_PIIX4_SMB_IDX + 1);
+
+	return (smba_en_lo & piix4_port_mask_sb800);
+}
+
 /*
  * Handles access to multiple SMBus ports on the SB800.
  * The port is selected by bits 2:1 of the smb_en register (0x2c).
@@ -678,12 +804,12 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr,
 	unsigned short piix4_smba = adapdata->smba;
 	int retries = MAX_TIMEOUT;
 	int smbslvcnt;
-	u8 smba_en_lo;
-	u8 port;
+	u8 prev_port;
 	int retval;
 
-	if (!request_muxed_region(SB800_PIIX4_SMB_IDX, 2, "sb800_piix4_smb"))
-		return -EBUSY;
+	retval = piix4_sb800_region_request(&adap->dev, &adapdata->mmio_cfg);
+	if (retval)
+		return retval;
 
 	/* Request the SMBUS semaphore, avoid conflicts with the IMC */
 	smbslvcnt  = inb_p(SMBSLVCNT);
@@ -738,18 +864,12 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr,
 		}
 	}
 
-	outb_p(piix4_port_sel_sb800, SB800_PIIX4_SMB_IDX);
-	smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
-
-	port = adapdata->port;
-	if ((smba_en_lo & piix4_port_mask_sb800) != port)
-		outb_p((smba_en_lo & ~piix4_port_mask_sb800) | port,
-		       SB800_PIIX4_SMB_IDX + 1);
+	prev_port = piix4_sb800_port_sel(adapdata->port, &adapdata->mmio_cfg);
 
 	retval = piix4_access(adap, addr, flags, read_write,
 			      command, size, data);
 
-	outb_p(smba_en_lo, SB800_PIIX4_SMB_IDX + 1);
+	piix4_sb800_port_sel(prev_port, &adapdata->mmio_cfg);
 
 	/* Release the semaphore */
 	outb_p(smbslvcnt | 0x20, SMBSLVCNT);
@@ -758,7 +878,7 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr,
 		piix4_imc_wakeup();
 
 release:
-	release_region(SB800_PIIX4_SMB_IDX, 2);
+	piix4_sb800_region_release(&adap->dev, &adapdata->mmio_cfg);
 	return retval;
 }
 
@@ -836,6 +956,7 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
 		return -ENOMEM;
 	}
 
+	adapdata->mmio_cfg.use_mmio = piix4_sb800_use_mmio(dev);
 	adapdata->smba = smba;
 	adapdata->sb800_main = sb800_main;
 	adapdata->port = port << piix4_port_shift_sb800;

drivers/i2c/busses/i2c-qcom-cci.c

 // SPDX-License-Identifier: GPL-2.0
 // Copyright (c) 2012-2016, The Linux Foundation. All rights reserved.
-// Copyright (c) 2017-20 Linaro Limited.
+// Copyright (c) 2017-2022 Linaro Limited.
 
 #include <linux/clk.h>
 #include <linux/completion.h>
@@ -776,6 +776,7 @@ static const struct of_device_id cci_dt_match[] = {
 	{ .compatible = "qcom,msm8996-cci", .data = &cci_v2_data},
 	{ .compatible = "qcom,sdm845-cci", .data = &cci_v2_data},
 	{ .compatible = "qcom,sm8250-cci", .data = &cci_v2_data},
+	{ .compatible = "qcom,sm8450-cci", .data = &cci_v2_data},
 	{}
 };
 MODULE_DEVICE_TABLE(of, cci_dt_match);

drivers/i2c/busses/i2c-rcar.c

@@ -1008,6 +1008,7 @@ static const struct of_device_id rcar_i2c_dt_ids[] = {
 	{ .compatible = "renesas,rcar-gen1-i2c", .data = (void *)I2C_RCAR_GEN1 },
 	{ .compatible = "renesas,rcar-gen2-i2c", .data = (void *)I2C_RCAR_GEN2 },
 	{ .compatible = "renesas,rcar-gen3-i2c", .data = (void *)I2C_RCAR_GEN3 },
+	{ .compatible = "renesas,rcar-gen4-i2c", .data = (void *)I2C_RCAR_GEN3 },
 	{},
 };
 MODULE_DEVICE_TABLE(of, rcar_i2c_dt_ids);

drivers/i2c/busses/i2c-riic.c

@@ -88,11 +88,6 @@
 
 #define RIIC_INIT_MSG	-1
 
-enum riic_type {
-	RIIC_RZ_A,
-	RIIC_RZ_G2L,
-};
-
 struct riic_dev {
 	void __iomem *base;
 	u8 *buf;
@@ -396,6 +391,11 @@ static struct riic_irq_desc riic_irqs[] = {
 	{ .res_num = 5, .isr = riic_tend_isr, .name = "riic-nack" },
 };
 
+static void riic_reset_control_assert(void *data)
+{
+	reset_control_assert(data);
+}
+
 static int riic_i2c_probe(struct platform_device *pdev)
 {
 	struct riic_dev *riic;
@@ -404,7 +404,6 @@ static int riic_i2c_probe(struct platform_device *pdev)
 	struct i2c_timings i2c_t;
 	struct reset_control *rstc;
 	int i, ret;
-	enum riic_type type;
 
 	riic = devm_kzalloc(&pdev->dev, sizeof(*riic), GFP_KERNEL);
 	if (!riic)
@@ -421,16 +420,18 @@ static int riic_i2c_probe(struct platform_device *pdev)
 		return PTR_ERR(riic->clk);
 	}
 
-	type = (enum riic_type)of_device_get_match_data(&pdev->dev);
-	if (type == RIIC_RZ_G2L) {
-		rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
-		if (IS_ERR(rstc)) {
-			dev_err(&pdev->dev, "Error: missing reset ctrl\n");
-			return PTR_ERR(rstc);
-		}
+	rstc = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(rstc))
+		return dev_err_probe(&pdev->dev, PTR_ERR(rstc),
+				     "Error: missing reset ctrl\n");
 
-		reset_control_deassert(rstc);
-	}
+	ret = reset_control_deassert(rstc);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(&pdev->dev, riic_reset_control_assert, rstc);
+	if (ret)
+		return ret;
 
 	for (i = 0; i < ARRAY_SIZE(riic_irqs); i++) {
 		ret = platform_get_irq(pdev, riic_irqs[i].res_num);
@@ -492,8 +493,7 @@ static int riic_i2c_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id riic_i2c_dt_ids[] = {
-	{ .compatible = "renesas,riic-r9a07g044", .data = (void *)RIIC_RZ_G2L },
-	{ .compatible = "renesas,riic-rz", .data = (void *)RIIC_RZ_A },
+	{ .compatible = "renesas,riic-rz", },
 	{ /* Sentinel */ },
 };
 

drivers/i2c/busses/i2c-tegra.c

@@ -1233,6 +1233,11 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 		return err;
 
 	i2c_dev->msg_buf = msg->buf;
+
+	/* The condition true implies smbus block read and len is already read */
+	if (msg->flags & I2C_M_RECV_LEN && end_state != MSG_END_CONTINUE)
+		i2c_dev->msg_buf = msg->buf + 1;
+
 	i2c_dev->msg_buf_remaining = msg->len;
 	i2c_dev->msg_err = I2C_ERR_NONE;
 	i2c_dev->msg_read = !!(msg->flags & I2C_M_RD);
@@ -1389,6 +1394,15 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
 			else
 				end_type = MSG_END_REPEAT_START;
 		}
+		/* If M_RECV_LEN use ContinueXfer to read the first byte */
+		if (msgs[i].flags & I2C_M_RECV_LEN) {
+			ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], MSG_END_CONTINUE);
+			if (ret)
+				break;
+			/* Set the read byte as msg len */
+			msgs[i].len = msgs[i].buf[0];
+			dev_dbg(i2c_dev->dev, "reading %d bytes\n", msgs[i].len);
+		}
 		ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], end_type);
 		if (ret)
 			break;
@@ -1416,10 +1430,10 @@ static u32 tegra_i2c_func(struct i2c_adapter *adap)
 {
 	struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
 	u32 ret = I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
-		  I2C_FUNC_10BIT_ADDR |	I2C_FUNC_PROTOCOL_MANGLING;
+		  I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING;
 
 	if (i2c_dev->hw->has_continue_xfer_support)
-		ret |= I2C_FUNC_NOSTART;
+		ret |= I2C_FUNC_NOSTART | I2C_FUNC_SMBUS_READ_BLOCK_DATA;
 
 	return ret;
 }

drivers/i2c/busses/i2c-xiic.c

@@ -734,7 +734,6 @@ static const struct i2c_adapter_quirks xiic_quirks = {
 
 static const struct i2c_adapter xiic_adapter = {
 	.owner = THIS_MODULE,
-	.name = DRIVER_NAME,
 	.class = I2C_CLASS_DEPRECATED,
 	.algo = &xiic_algorithm,
 	.quirks = &xiic_quirks,
@@ -771,6 +770,8 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	i2c_set_adapdata(&i2c->adap, i2c);
 	i2c->adap.dev.parent = &pdev->dev;
 	i2c->adap.dev.of_node = pdev->dev.of_node;
+	snprintf(i2c->adap.name, sizeof(i2c->adap.name),
+		 DRIVER_NAME " %s", pdev->name);
 
 	mutex_init(&i2c->lock);
 

drivers/i2c/i2c-core-acpi.c

@@ -236,7 +236,8 @@ static int i2c_acpi_get_info(struct acpi_device *adev,
 		struct acpi_device *adapter_adev;
 
 		/* The adapter must be present */
-		if (acpi_bus_get_device(lookup.adapter_handle, &adapter_adev))
+		adapter_adev = acpi_fetch_acpi_dev(lookup.adapter_handle);
+		if (!adapter_adev)
 			return -ENODEV;
 		if (acpi_bus_get_status(adapter_adev) ||
 		    !adapter_adev->status.present)
@@ -275,13 +276,10 @@ static acpi_status i2c_acpi_add_device(acpi_handle handle, u32 level,
 				       void *data, void **return_value)
 {
 	struct i2c_adapter *adapter = data;
-	struct acpi_device *adev;
+	struct acpi_device *adev = acpi_fetch_acpi_dev(handle);
 	struct i2c_board_info info;
 
-	if (acpi_bus_get_device(handle, &adev))
-		return AE_OK;
-
-	if (i2c_acpi_get_info(adev, &info, adapter, NULL))
+	if (!adev || i2c_acpi_get_info(adev, &info, adapter, NULL))
 		return AE_OK;
 
 	i2c_acpi_register_device(adapter, adev, &info);
@@ -341,12 +339,9 @@ static acpi_status i2c_acpi_lookup_speed(acpi_handle handle, u32 level,
 					   void *data, void **return_value)
 {
 	struct i2c_acpi_lookup *lookup = data;
-	struct acpi_device *adev;
-
-	if (acpi_bus_get_device(handle, &adev))
-		return AE_OK;
+	struct acpi_device *adev = acpi_fetch_acpi_dev(handle);
 
-	if (i2c_acpi_do_lookup(adev, lookup))
+	if (!adev || i2c_acpi_do_lookup(adev, lookup))
 		return AE_OK;
 
 	if (lookup->search_handle != lookup->adapter_handle)

drivers/i2c/i2c-core-base.c

@@ -1424,7 +1424,7 @@ int i2c_handle_smbus_host_notify(struct i2c_adapter *adap, unsigned short addr)
 	if (irq <= 0)
 		return -ENXIO;
 
-	generic_handle_irq(irq);
+	generic_handle_irq_safe(irq);
 
 	return 0;
 }
@@ -1479,7 +1479,7 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 		goto out_list;
 	}
 
-	res = of_i2c_setup_smbus_alert(adap);
+	res = i2c_setup_smbus_alert(adap);
 	if (res)
 		goto out_reg;
 

drivers/i2c/i2c-core-slave.c

@@ -14,6 +14,9 @@
 
 #include "i2c-core.h"
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/i2c_slave.h>
+
 int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb)
 {
 	int ret;
@@ -79,6 +82,18 @@ int i2c_slave_unregister(struct i2c_client *client)
 }
 EXPORT_SYMBOL_GPL(i2c_slave_unregister);
 
+int i2c_slave_event(struct i2c_client *client,
+		    enum i2c_slave_event event, u8 *val)
+{
+	int ret = client->slave_cb(client, event, val);
+
+	if (trace_i2c_slave_enabled())
+		trace_i2c_slave(client, event, val, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i2c_slave_event);
+
 /**
  * i2c_detect_slave_mode - detect operation mode
  * @dev: The device owning the bus

drivers/i2c/i2c-core-smbus.c

@@ -14,6 +14,7 @@
 #include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/i2c-smbus.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 
 #include "i2c-core.h"
@@ -701,13 +702,17 @@ struct i2c_client *i2c_new_smbus_alert_device(struct i2c_adapter *adapter,
 }
 EXPORT_SYMBOL_GPL(i2c_new_smbus_alert_device);
 
-#if IS_ENABLED(CONFIG_I2C_SMBUS) && IS_ENABLED(CONFIG_OF)
-int of_i2c_setup_smbus_alert(struct i2c_adapter *adapter)
+#if IS_ENABLED(CONFIG_I2C_SMBUS)
+int i2c_setup_smbus_alert(struct i2c_adapter *adapter)
 {
+	struct device *parent = adapter->dev.parent;
 	int irq;
 
-	irq = of_property_match_string(adapter->dev.of_node, "interrupt-names",
-				       "smbus_alert");
+	/* Adapter instantiated without parent, skip the SMBus alert setup */
+	if (!parent)
+		return 0;
+
+	irq = device_property_match_string(parent, "interrupt-names", "smbus_alert");
 	if (irq == -EINVAL || irq == -ENODATA)
 		return 0;
 	else if (irq < 0)
@@ -715,5 +720,4 @@ int of_i2c_setup_smbus_alert(struct i2c_adapter *adapter)
 
 	return PTR_ERR_OR_ZERO(i2c_new_smbus_alert_device(adapter, NULL));
 }
-EXPORT_SYMBOL_GPL(of_i2c_setup_smbus_alert);
 #endif

drivers/i2c/i2c-core.h

@@ -86,3 +86,12 @@ void of_i2c_register_devices(struct i2c_adapter *adap);
 static inline void of_i2c_register_devices(struct i2c_adapter *adap) { }
 #endif
 extern struct notifier_block i2c_of_notifier;
+
+#if IS_ENABLED(CONFIG_I2C_SMBUS)
+int i2c_setup_smbus_alert(struct i2c_adapter *adap);
+#else
+static inline int i2c_setup_smbus_alert(struct i2c_adapter *adap)
+{
+	return 0;
+}
+#endif

drivers/i2c/i2c-smbus.c

@@ -13,7 +13,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/of_irq.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
 
@@ -128,7 +128,8 @@ static int smbalert_probe(struct i2c_client *ara,
 	if (setup) {
 		irq = setup->irq;
 	} else {
-		irq = of_irq_get_byname(adapter->dev.of_node, "smbus_alert");
+		irq = fwnode_irq_get_byname(dev_fwnode(adapter->dev.parent),
+					    "smbus_alert");
 		if (irq <= 0)
 			return irq;
 	}

drivers/i2c/muxes/i2c-demux-pinctrl.c

@@ -261,7 +261,7 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
 
 	err = device_create_file(&pdev->dev, &dev_attr_available_masters);
 	if (err)
-		goto err_rollback;
+		goto err_rollback_activation;
 
 	err = device_create_file(&pdev->dev, &dev_attr_current_master);
 	if (err)
@@ -271,8 +271,9 @@ static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
 
 err_rollback_available:
 	device_remove_file(&pdev->dev, &dev_attr_available_masters);
-err_rollback:
+err_rollback_activation:
 	i2c_demux_deactivate_master(priv);
+err_rollback:
 	for (j = 0; j < i; j++) {
 		of_node_put(priv->chan[j].parent_np);
 		of_changeset_destroy(&priv->chan[j].chgset);

include/linux/i2c-smbus.h

@@ -30,14 +30,6 @@ struct i2c_client *i2c_new_smbus_alert_device(struct i2c_adapter *adapter,
 					      struct i2c_smbus_alert_setup *setup);
 int i2c_handle_smbus_alert(struct i2c_client *ara);
 
-#if IS_ENABLED(CONFIG_I2C_SMBUS) && IS_ENABLED(CONFIG_OF)
-int of_i2c_setup_smbus_alert(struct i2c_adapter *adap);
-#else
-static inline int of_i2c_setup_smbus_alert(struct i2c_adapter *adap)
-{
-	return 0;
-}
-#endif
 #if IS_ENABLED(CONFIG_I2C_SMBUS) && IS_ENABLED(CONFIG_I2C_SLAVE)
 struct i2c_client *i2c_new_slave_host_notify_device(struct i2c_adapter *adapter);
 void i2c_free_slave_host_notify_device(struct i2c_client *client);

include/linux/i2c.h

@@ -392,12 +392,8 @@ enum i2c_slave_event {
 int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb);
 int i2c_slave_unregister(struct i2c_client *client);
 bool i2c_detect_slave_mode(struct device *dev);
-
-static inline int i2c_slave_event(struct i2c_client *client,
-				  enum i2c_slave_event event, u8 *val)
-{
-	return client->slave_cb(client, event, val);
-}
+int i2c_slave_event(struct i2c_client *client,
+		    enum i2c_slave_event event, u8 *val);
 #else
 static inline bool i2c_detect_slave_mode(struct device *dev) { return false; }
 #endif

include/linux/ioport.h

@@ -262,6 +262,8 @@ resource_union(struct resource *r1, struct resource *r2, struct resource *r)
 #define request_muxed_region(start,n,name)	__request_region(&ioport_resource, (start), (n), (name), IORESOURCE_MUXED)
 #define __request_mem_region(start,n,name, excl) __request_region(&iomem_resource, (start), (n), (name), excl)
 #define request_mem_region(start,n,name) __request_region(&iomem_resource, (start), (n), (name), 0)
+#define request_mem_region_muxed(start, n, name) \
+	__request_region(&iomem_resource, (start), (n), (name), IORESOURCE_MUXED)
 #define request_mem_region_exclusive(start,n,name) \
 	__request_region(&iomem_resource, (start), (n), (name), IORESOURCE_EXCLUSIVE)
 #define rename_region(region, newname) do { (region)->name = (newname); } while (0)

include/linux/property.h

@@ -121,6 +121,7 @@ struct fwnode_handle *fwnode_handle_get(struct fwnode_handle *fwnode);
 void fwnode_handle_put(struct fwnode_handle *fwnode);
 
 int fwnode_irq_get(const struct fwnode_handle *fwnode, unsigned int index);
+int fwnode_irq_get_byname(const struct fwnode_handle *fwnode, const char *name);
 
 void __iomem *fwnode_iomap(struct fwnode_handle *fwnode, int index);
 

include/trace/events/i2c_slave.h

+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * I2C slave tracepoints
+ *
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM i2c_slave
+
+#if !defined(_TRACE_I2C_SLAVE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_I2C_SLAVE_H
+
+#include <linux/i2c.h>
+#include <linux/tracepoint.h>
+
+TRACE_DEFINE_ENUM(I2C_SLAVE_READ_REQUESTED);
+TRACE_DEFINE_ENUM(I2C_SLAVE_WRITE_REQUESTED);
+TRACE_DEFINE_ENUM(I2C_SLAVE_READ_PROCESSED);
+TRACE_DEFINE_ENUM(I2C_SLAVE_WRITE_RECEIVED);
+TRACE_DEFINE_ENUM(I2C_SLAVE_STOP);
+
+#define show_event_type(type)						\
+	__print_symbolic(type,						\
+		{ I2C_SLAVE_READ_REQUESTED,	"RD_REQ" },		\
+		{ I2C_SLAVE_WRITE_REQUESTED,	"WR_REQ" },		\
+		{ I2C_SLAVE_READ_PROCESSED,	"RD_PRO" },		\
+		{ I2C_SLAVE_WRITE_RECEIVED,	"WR_RCV" },		\
+		{ I2C_SLAVE_STOP,		"  STOP" })
+
+TRACE_EVENT(i2c_slave,
+	TP_PROTO(const struct i2c_client *client, enum i2c_slave_event event,
+		 __u8 *val, int cb_ret),
+	TP_ARGS(client, event, val, cb_ret),
+	TP_STRUCT__entry(
+		__field(int,				adapter_nr	)
+		__field(int,				ret		)
+		__field(__u16,				addr		)
+		__field(__u16,				len		)
+		__field(enum i2c_slave_event,		event		)
+		__array(__u8,				buf,	1)	),
+
+	TP_fast_assign(
+		__entry->adapter_nr = client->adapter->nr;
+		__entry->addr = client->addr;
+		__entry->event = event;
+		__entry->ret = cb_ret;
+		switch (event) {
+		case I2C_SLAVE_READ_REQUESTED:
+		case I2C_SLAVE_READ_PROCESSED:
+		case I2C_SLAVE_WRITE_RECEIVED:
+			__entry->len = 1;
+			memcpy(__entry->buf, val, __entry->len);
+			break;
+		default:
+			__entry->len = 0;
+			break;
+		}
+		),
+	TP_printk("i2c-%d a=%03x ret=%d %s [%*phD]",
+		__entry->adapter_nr, __entry->addr, __entry->ret,
+		show_event_type(__entry->event), __entry->len, __entry->buf
+		));
+
+#endif /* _TRACE_I2C_SLAVE_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>