pata-rb532-cf: get rid of the irq_to_gpio() call

commit 01836176 upstream.

The RB532 platform specific irq_to_gpio() implementation has been
removed with commit 832f5dac ("MIPS: Remove all the uses of
custom gpio.h"). Now the platform uses the generic stub which causes
the following error:

  pata-rb532-cf pata-rb532-cf: no GPIO found for irq149
  pata-rb532-cf: probe of pata-rb532-cf failed with error -2

Drop the irq_to_gpio() call and get the GPIO number from platform
data instead. After this change, the driver works again:

  scsi host0: pata-rb532-cf
  ata1: PATA max PIO4 irq 149
  ata1.00: CFA: CF 1GB, 20080820, max MWDMA4
  ata1.00: 1989792 sectors, multi 0: LBA
  ata1.00: configured for PIO4
  scsi 0:0:0:0: Direct-Access     ATA      CF 1GB           0820 PQ: 0\
  ANSI: 5
  sd 0:0:0:0: [sda] 1989792 512-byte logical blocks: (1.01 GB/971 MiB)
  sd 0:0:0:0: [sda] Write Protect is off
  sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't\
  support DPO or FUA
   sda: sda1 sda2
  sd 0:0:0:0: [sda] Attached SCSI disk

Fixes: 832f5dac ("MIPS: Remove all the uses of custom gpio.h")
Cc: Alban Bedel <albeu@free.fr>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/ata/pata_rb532_cf.c

@@ -32,6 +32,8 @@
 #include <linux/libata.h>
 #include <scsi/scsi_host.h>
 
+#include <asm/mach-rc32434/rb.h>
+
 #define DRV_NAME	"pata-rb532-cf"
 #define DRV_VERSION	"0.1.0"
 #define DRV_DESC	"PATA driver for RouterBOARD 532 Compact Flash"
@@ -107,6 +109,7 @@ static int rb532_pata_driver_probe(struct platform_device *pdev)
 	int gpio;
 	struct resource *res;
 	struct ata_host *ah;
+	struct cf_device *pdata;
 	struct rb532_cf_info *info;
 	int ret;
 
@@ -122,7 +125,13 @@ static int rb532_pata_driver_probe(struct platform_device *pdev)
 		return -ENOENT;
 	}
 
-	gpio = irq_to_gpio(irq);
+	pdata = dev_get_platdata(&pdev->dev);
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data specified\n");
+		return -EINVAL;
+	}
+
+	gpio = pdata->gpio_pin;
 	if (gpio < 0) {
 		dev_err(&pdev->dev, "no GPIO found for irq%d\n", irq);
 		return -ENOENT;