ath11k: add support for m3 firmware

PCI devices like QCA6390 have a separate firmware image for the m3
micro-controller. Add support to load the firmware using m3.bin file.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1597389030-13887-2-git-send-email-kvalo@codeaurora.org

drivers/net/wireless/ath/ath11k/ahb.c

@@ -27,6 +27,7 @@ MODULE_DEVICE_TABLE(of, ath11k_ahb_of_match);
 
 static const struct ath11k_bus_params ath11k_ahb_bus_params = {
 	.mhi_support = false,
+	.m3_fw_support = false,
 };
 
 /* Target firmware's Copy Engine configuration. */

drivers/net/wireless/ath/ath11k/core.h

@@ -582,6 +582,7 @@ struct ath11k_board_data {
 
 struct ath11k_bus_params {
 	bool mhi_support;
+	bool m3_fw_support;
 };
 
 /* IPQ8074 HW channel counters frequency value in hertz */

drivers/net/wireless/ath/ath11k/hw.h

@@ -73,6 +73,7 @@
 #define ATH11K_DEFAULT_BOARD_FILE	"board.bin"
 #define ATH11K_DEFAULT_CAL_FILE		"caldata.bin"
 #define ATH11K_AMSS_FILE		"amss.bin"
+#define ATH11K_M3_FILE			"m3.bin"
 
 enum ath11k_hw_rate_cck {
 	ATH11K_HW_RATE_CCK_LP_11M = 0,

drivers/net/wireless/ath/ath11k/pci.c

@@ -29,6 +29,7 @@ MODULE_DEVICE_TABLE(pci, ath11k_pci_id_table);
 
 static const struct ath11k_bus_params ath11k_pci_bus_params = {
 	.mhi_support = true,
+	.m3_fw_support = true,
 };
 
 static const struct ath11k_msi_config msi_config = {

drivers/net/wireless/ath/ath11k/qmi.c

@@ -1516,11 +1516,17 @@ static int ath11k_qmi_host_cap_send(struct ath11k_base *ab)
 	req.bdf_support_valid = 1;
 	req.bdf_support = 1;
 
-	req.m3_support_valid = 0;
-	req.m3_support = 0;
-
-	req.m3_cache_support_valid = 0;
-	req.m3_cache_support = 0;
+	if (ab->bus_params.m3_fw_support) {
+		req.m3_support_valid = 1;
+		req.m3_support = 1;
+		req.m3_cache_support_valid = 1;
+		req.m3_cache_support = 1;
+	} else {
+		req.m3_support_valid = 0;
+		req.m3_support = 0;
+		req.m3_cache_support_valid = 0;
+		req.m3_cache_support = 0;
+	}
 
 	req.cal_done_valid = 1;
 	req.cal_done = ab->qmi.cal_done;
@@ -1908,8 +1914,57 @@ static int ath11k_qmi_load_bdf(struct ath11k_base *ab)
 	return ret;
 }
 
+static int ath11k_qmi_m3_load(struct ath11k_base *ab)
+{
+	struct m3_mem_region *m3_mem = &ab->qmi.m3_mem;
+	const struct firmware *fw;
+	char path[100];
+	int ret;
+
+	if (m3_mem->vaddr || m3_mem->size)
+		return 0;
+
+	fw = ath11k_core_firmware_request(ab, ATH11K_M3_FILE);
+	if (IS_ERR(fw)) {
+		ret = PTR_ERR(fw);
+		ath11k_core_create_firmware_path(ab, ATH11K_M3_FILE,
+						 path, sizeof(path));
+		ath11k_err(ab, "failed to load %s: %d\n", path, ret);
+		return ret;
+	}
+
+	m3_mem->vaddr = dma_alloc_coherent(ab->dev,
+					   fw->size, &m3_mem->paddr,
+					   GFP_KERNEL);
+	if (!m3_mem->vaddr) {
+		ath11k_err(ab, "failed to allocate memory for M3 with size %zu\n",
+			   fw->size);
+		release_firmware(fw);
+		return -ENOMEM;
+	}
+
+	memcpy(m3_mem->vaddr, fw->data, fw->size);
+	m3_mem->size = fw->size;
+	release_firmware(fw);
+
+	return 0;
+}
+
+static void ath11k_qmi_m3_free(struct ath11k_base *ab)
+{
+	struct m3_mem_region *m3_mem = &ab->qmi.m3_mem;
+
+	if (!ab->bus_params.m3_fw_support || !m3_mem->vaddr)
+		return;
+
+	dma_free_coherent(ab->dev, m3_mem->size,
+			  m3_mem->vaddr, m3_mem->paddr);
+	m3_mem->vaddr = NULL;
+}
+
 static int ath11k_qmi_wlanfw_m3_info_send(struct ath11k_base *ab)
 {
+	struct m3_mem_region *m3_mem = &ab->qmi.m3_mem;
 	struct qmi_wlanfw_m3_info_req_msg_v01 req;
 	struct qmi_wlanfw_m3_info_resp_msg_v01 resp;
 	struct qmi_txn txn = {};
@@ -1917,8 +1972,20 @@ static int ath11k_qmi_wlanfw_m3_info_send(struct ath11k_base *ab)
 
 	memset(&req, 0, sizeof(req));
 	memset(&resp, 0, sizeof(resp));
-	req.addr = 0;
-	req.size = 0;
+
+	if (ab->bus_params.m3_fw_support) {
+		ret = ath11k_qmi_m3_load(ab);
+		if (ret) {
+			ath11k_err(ab, "failed to load m3 firmware: %d", ret);
+			return ret;
+		}
+
+		req.addr = m3_mem->paddr;
+		req.size = m3_mem->size;
+	} else {
+		req.addr = 0;
+		req.size = 0;
+	}
 
 	ret = qmi_txn_init(&ab->qmi.handle, &txn,
 			   qmi_wlanfw_m3_info_resp_msg_v01_ei, &resp);
@@ -2424,5 +2491,6 @@ void ath11k_qmi_deinit_service(struct ath11k_base *ab)
 	qmi_handle_release(&ab->qmi.handle);
 	cancel_work_sync(&ab->qmi.event_work);
 	destroy_workqueue(ab->qmi.event_wq);
+	ath11k_qmi_m3_free(ab);
 }
 

drivers/net/wireless/ath/ath11k/qmi.h

@@ -96,6 +96,12 @@ struct target_info {
 	char fw_build_id[ATH11K_QMI_WLANFW_MAX_BUILD_ID_LEN_V01 + 1];
 };
 
+struct m3_mem_region {
+	u32 size;
+	dma_addr_t paddr;
+	void *vaddr;
+};
+
 struct ath11k_qmi {
 	struct ath11k_base *ab;
 	struct qmi_handle handle;
@@ -110,6 +116,7 @@ struct ath11k_qmi {
 	u32 target_mem_mode;
 	u8 cal_done;
 	struct target_info target;
+	struct m3_mem_region m3_mem;
 };
 
 #define QMI_WLANFW_HOST_CAP_REQ_MSG_V01_MAX_LEN		189