Commit 56a0eccd authored by Chanho Min's avatar Chanho Min Committed by Olof Johansson

arm64: dts: Add dts files for LG Electronics's lg1312 SoC

Add initial dtsi file to support lg1312 SoC which based on
Cortex-A53. Also add dts file to support lg1312 reference board
which based on lg1312 SoC.
Signed-off-by: default avatarChanho Min <chanho.min@lge.com>
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parent 49695dfa
......@@ -18,6 +18,7 @@ dts-dirs += rockchip
dts-dirs += socionext
dts-dirs += sprd
dts-dirs += xilinx
dts-dirs += lg
subdir-y := $(dts-dirs)
......
dtb-$(CONFIG_ARCH_LG1K) += lg1312-ref.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
clean-files := *.dtb
/*
* dts file for lg1312 Reference Board.
*
* Copyright (C) 2016, LG Electronics
*/
/dts-v1/;
#include "lg1312.dtsi"
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "LG Electronics, DTV SoC LG1312 Reference Board";
compatible = "lge,lg1312-ref", "lge,lg1312";
aliases {
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
};
memory {
device_type = "memory";
reg = <0x0 0x00000000 0x20000000>;
};
chosen {
stdout-path = "serial0:115200n8";
};
};
&uart0 {
status = "okay";
};
/*
* dts file for lg1312 SoC
*
* Copyright (C) 2016, LG Electronics
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
#address-cells = <2>;
#size-cells = <2>;
compatible = "lge,lg1312";
interrupt-parent = <&gic>;
cpus {
#address-cells = <2>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x0>;
next-level-cache = <&L2_0>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&L2_0>;
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&L2_0>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&L2_0>;
};
L2_0: l2-cache0 {
compatible = "cache";
};
};
psci {
compatible = "arm,psci-0.2", "arm,psci";
method = "smc";
cpu_suspend = <0x84000001>;
cpu_off = <0x84000002>;
cpu_on = <0x84000003>;
};
gic: interrupt-controller@c0001000 {
#interrupt-cells = <3>;
compatible = "arm,gic-400";
interrupt-controller;
reg = <0x0 0xc0001000 0x1000>,
<0x0 0xc0002000 0x2000>,
<0x0 0xc0004000 0x2000>,
<0x0 0xc0006000 0x2000>;
};
pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>,
<&cpu1>,
<&cpu2>,
<&cpu3>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0x0f) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_RAW(0x0f) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_RAW(0x0f) |
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_RAW(0x0f) |
IRQ_TYPE_LEVEL_LOW)>;
};
clk_bus: clk_bus {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <198000000>;
clock-output-names = "BUSCLK";
};
soc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&gic>;
ranges;
eth0: ethernet@c1b00000 {
compatible = "cdns,gem";
reg = <0x0 0xc1b00000 0x1000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_bus>, <&clk_bus>;
clock-names = "hclk", "pclk";
phy-mode = "rmii";
/* Filled in by boot */
mac-address = [ 00 00 00 00 00 00 ];
};
};
amba {
#address-cells = <2>;
#size-cells = <1>;
#interrupts-cells = <3>;
compatible = "arm,amba-bus";
interrupt-parent = <&gic>;
ranges;
timers: timer@fd100000 {
compatible = "arm,sp804";
reg = <0x0 0xfd100000 0x1000>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
};
wdog: watchdog@fd200000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xfd200000 0x1000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
};
uart0: serial@fe000000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfe000000 0x1000>;
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
status="disabled";
};
uart1: serial@fe100000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfe100000 0x1000>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
status="disabled";
};
uart2: serial@fe200000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0xfe200000 0x1000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
status="disabled";
};
spi0: ssp@fe800000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x0 0xfe800000 0x1000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
};
spi1: ssp@fe900000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x0 0xfe900000 0x1000>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
};
dmac0: dma@c1128000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x0 0xc1128000 0x1000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
};
gpio0: gpio@fd400000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0x0 0xfd400000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
status="disabled";
};
gpio1: gpio@fd410000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0x0 0xfd410000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
status="disabled";
};
gpio2: gpio@fd420000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0x0 0xfd420000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
status="disabled";
};
gpio3: gpio@fd430000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0x0 0xfd430000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
};
gpio4: gpio@fd440000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0x0 0xfd440000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
status="disabled";
};
gpio5: gpio@fd450000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0x0 0xfd450000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
status="disabled";
};
gpio6: gpio@fd460000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0x0 0xfd460000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
status="disabled";
};
gpio7: gpio@fd470000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0x0 0xfd470000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
status="disabled";
};
gpio8: gpio@fd480000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0x0 0xfd480000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
status="disabled";
};
gpio9: gpio@fd490000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0x0 0xfd490000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
status="disabled";
};
gpio10: gpio@fd4a0000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0x0 0xfd4a0000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
status="disabled";
};
gpio11: gpio@fd4b0000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0x0 0xfd4b0000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
};
gpio12: gpio@fd4c0000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0x0 0xfd4c0000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
status="disabled";
};
gpio13: gpio@fd4d0000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0x0 0xfd4d0000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
status="disabled";
};
gpio14: gpio@fd4e0000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0x0 0xfd4e0000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
status="disabled";
};
gpio15: gpio@fd4f0000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0x0 0xfd4f0000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
status="disabled";
};
gpio16: gpio@fd500000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0x0 0xfd500000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
status="disabled";
};
gpio17: gpio@fd510000 {
#gpio-cells = <2>;
compatible = "arm,pl061", "arm,primecell";
gpio-controller;
reg = <0x0 0xfd510000 0x1000>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment