Commit 56ac4aa4 authored by Laurent Pinchart's avatar Laurent Pinchart Committed by Mauro Carvalho Chehab

media: i2c: Drop unused s5k6aa camera sensor driver

The s5k6aa camera sensor driver doesn't support DT and relies on
platform data. The last board files supplying platform data for that
device have been removed from the kernel in v3.11. The driver hasn't
been used since them. Drop it.
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: default avatarSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@kernel.org>
parent 4604236d
...@@ -105,7 +105,6 @@ s5c73m3 Samsung S5C73M3 sensor ...@@ -105,7 +105,6 @@ s5c73m3 Samsung S5C73M3 sensor
s5k4ecgx Samsung S5K4ECGX sensor s5k4ecgx Samsung S5K4ECGX sensor
s5k5baf Samsung S5K5BAF sensor s5k5baf Samsung S5K5BAF sensor
s5k6a3 Samsung S5K6A3 sensor s5k6a3 Samsung S5K6A3 sensor
s5k6aa Samsung S5K6AAFX sensor
sr030pc30 Siliconfile SR030PC30 sensor sr030pc30 Siliconfile SR030PC30 sensor
vs6624 ST VS6624 sensor vs6624 ST VS6624 sensor
============ ========================================================== ============ ==========================================================
......
...@@ -784,15 +784,6 @@ config VIDEO_S5K6A3 ...@@ -784,15 +784,6 @@ config VIDEO_S5K6A3
This is a V4L2 sensor driver for Samsung S5K6A3 raw This is a V4L2 sensor driver for Samsung S5K6A3 raw
camera sensor. camera sensor.
config VIDEO_S5K6AA
tristate "Samsung S5K6AAFX sensor support"
depends on I2C && VIDEO_DEV
select MEDIA_CONTROLLER
select VIDEO_V4L2_SUBDEV_API
help
This is a V4L2 sensor driver for Samsung S5K6AA(FX) 1.3M
camera sensor with an embedded SoC image signal processor.
config VIDEO_SR030PC30 config VIDEO_SR030PC30
tristate "Siliconfile SR030PC30 sensor support" tristate "Siliconfile SR030PC30 sensor support"
depends on I2C && VIDEO_DEV depends on I2C && VIDEO_DEV
......
...@@ -105,7 +105,6 @@ obj-$(CONFIG_VIDEO_RJ54N1) += rj54n1cb0c.o ...@@ -105,7 +105,6 @@ obj-$(CONFIG_VIDEO_RJ54N1) += rj54n1cb0c.o
obj-$(CONFIG_VIDEO_S5C73M3) += s5c73m3/ obj-$(CONFIG_VIDEO_S5C73M3) += s5c73m3/
obj-$(CONFIG_VIDEO_S5K5BAF) += s5k5baf.o obj-$(CONFIG_VIDEO_S5K5BAF) += s5k5baf.o
obj-$(CONFIG_VIDEO_S5K6A3) += s5k6a3.o obj-$(CONFIG_VIDEO_S5K6A3) += s5k6a3.o
obj-$(CONFIG_VIDEO_S5K6AA) += s5k6aa.o
obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o
obj-$(CONFIG_VIDEO_SAA6752HS) += saa6752hs.o obj-$(CONFIG_VIDEO_SAA6752HS) += saa6752hs.o
obj-$(CONFIG_VIDEO_SAA7110) += saa7110.o obj-$(CONFIG_VIDEO_SAA7110) += saa7110.o
......
This diff is collapsed.
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* S5K6AAFX camera sensor driver header
*
* Copyright (C) 2011 Samsung Electronics Co., Ltd.
*/
#ifndef S5K6AA_H
#define S5K6AA_H
#include <media/v4l2-mediabus.h>
/**
* struct s5k6aa_gpio - data structure describing a GPIO
* @gpio: GPIO number
* @level: indicates active state of the @gpio
*/
struct s5k6aa_gpio {
int gpio;
int level;
};
/**
* struct s5k6aa_platform_data - s5k6aa driver platform data
* @set_power: an additional callback to the board code, called
* after enabling the regulators and before switching
* the sensor off
* @mclk_frequency: sensor's master clock frequency in Hz
* @gpio_reset: GPIO driving RESET pin
* @gpio_stby: GPIO driving STBY pin
* @bus_type: bus type
* @nlanes: maximum number of MIPI-CSI lanes used
* @horiz_flip: default horizontal image flip value, non zero to enable
* @vert_flip: default vertical image flip value, non zero to enable
*/
struct s5k6aa_platform_data {
int (*set_power)(int enable);
unsigned long mclk_frequency;
struct s5k6aa_gpio gpio_reset;
struct s5k6aa_gpio gpio_stby;
enum v4l2_mbus_type bus_type;
u8 nlanes;
u8 horiz_flip;
u8 vert_flip;
};
#endif /* S5K6AA_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment