Skip to content

L
linux
Commit 56e9e166 authored by Bill Pemberton's avatar Bill Pemberton Committed by Greg Kroah-Hartman
Browse files
Options

Staging: comedi: more remove C99 comments 

Signed-off-by: default avatarBill Pemberton <wfp5p@virginia.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 68c3dbff
Hide whitespace changes
Inline Side-by-side
Showing with 39 additions and 39 deletions
drivers/staging/comedi/drivers/addi-data/addi_eeprom.c
View file @ 56e9e166
......@@ -811,35 +811,35 @@ int i_EepromReadMainHeader(unsigned short w_PCIBoardEepromAddress,
struct str_MainHeader s_MainHeader;
struct str_DigitalInputHeader s_DigitalInputHeader;
struct str_DigitalOutputHeader s_DigitalOutputHeader;
//struct str_TimerMainHeader s_TimerMainHeader,s_WatchdogMainHeader;
/* struct str_TimerMainHeader s_TimerMainHeader,s_WatchdogMainHeader; */
str_AnalogOutputHeader s_AnalogOutputHeader;
struct str_AnalogInputHeader s_AnalogInputHeader;
// Read size
/* Read size */
s_MainHeader.w_HeaderSize =
w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
0x100 + 8);
// Read nbr of functionality
/* Read nbr of functionality */
w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
pc_PCIChipInformation, 0x100 + 10);
s_MainHeader.b_Nfunctions = (unsigned char) w_Temp & 0x00FF;
// Read functionality details
/* Read functionality details */
for (i = 0; i < s_MainHeader.b_Nfunctions; i++) {
// Read Type
/* Read Type */
w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
pc_PCIChipInformation, 0x100 + 12 + w_Count);
s_MainHeader.s_Functions[i].b_Type = (unsigned char) w_Temp & 0x3F;
w_Count = w_Count + 2;
//Read Address
/* Read Address */
s_MainHeader.s_Functions[i].w_Address =
w_EepromReadWord(w_PCIBoardEepromAddress,
pc_PCIChipInformation, 0x100 + 12 + w_Count);
w_Count = w_Count + 2;
}
// Display main header info
/* Display main header info */
for (i = 0; i < s_MainHeader.b_Nfunctions; i++) {
switch (s_MainHeader.s_Functions[i].b_Type) {
......
drivers/staging/comedi/drivers/adq12b.c
View file @ 56e9e166
......@@ -81,7 +81,7 @@ If you do not specify any options, they will default to
#include "../comedidev.h"
// address scheme (page 2.17 of the manual)
/* address scheme (page 2.17 of the manual) */
#define ADQ12B_SIZE 16
#define ADQ12B_CTREG 0x00
......@@ -94,12 +94,12 @@ If you do not specify any options, they will default to
#define ADQ12B_CONT2 0x0e
#define ADQ12B_COWORD 0x0f
// mask of the bit at STINR to check end of conversion
/* mask of the bit at STINR to check end of conversion */
#define ADQ12B_EOC 0x20
#define TIMEOUT 20
// available ranges through the PGA gains
/* available ranges through the PGA gains */
static const struct comedi_lrange range_adq12b_ai_bipolar = { 4, {
BIP_RANGE(5),
BIP_RANGE(2),
......@@ -134,7 +134,7 @@ static const struct adq12b_board adq12b_boards[] = {
.di_chans = 5,
.do_chans = 8
}
// potentially, more adq-based deviced will be added
/* potentially, more adq-based deviced will be added */
/*,
.name = "adq12b",
.ai_chans = 16, // this is just for reference, hardcoded again later
......@@ -337,17 +337,17 @@ static int adq12b_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s
/* wait for end of convertion */
i = 0;
do {
// comedi_udelay(1);
/* comedi_udelay(1); */
status = inb(dev->iobase + ADQ12B_STINR);
status = status & ADQ12B_EOC;
} while (status == 0 && ++i < TIMEOUT);
// } while (++i < 10);
/* } while (++i < 10); */
/* read data */
hi = inb(dev->iobase + ADQ12B_ADHIG);
lo = inb(dev->iobase + ADQ12B_ADLOW);
//rt_printk("debug: chan=%d range=%d status=%d hi=%d lo=%d\n", channel, range, status, hi, lo);
/* rt_printk("debug: chan=%d range=%d status=%d hi=%d lo=%d\n", channel, range, status, hi, lo); */
data[n] = (hi << 8) | lo;
}
......
drivers/staging/comedi/drivers/ni_pcidio.c
View file @ 56e9e166
......@@ -66,8 +66,8 @@ comedi_nonfree_firmware tarball available from http://www.comedi.org
*/
#define USE_DMA
//#define DEBUG 1
//#define DEBUG_FLAGS
/* #define DEBUG 1 */
/* #define DEBUG_FLAGS */
#include "../comedidev.h"
......@@ -117,9 +117,9 @@ comedi_nonfree_firmware tarball available from http://www.comedi.org
#define Waited (1<<5)
#define PrimaryTC (1<<6)
#define SecondaryTC (1<<7)
//#define SerialRose
//#define ReqRose
//#define Paused
/* #define SerialRose */
/* #define ReqRose */
/* #define Paused */
#define Group_1_First_Clear 6 /* W */
#define Group_2_First_Clear 7 /* W */
......@@ -206,7 +206,7 @@ comedi_nonfree_firmware tarball available from http://www.comedi.org
#define DMA_Line_Control_Group1 76
#define DMA_Line_Control_Group2 108
// channel zero is none
/* channel zero is none */
static inline unsigned primary_DMAChannel_bits(unsigned channel)
{
return channel & 0x3;
......@@ -486,7 +486,7 @@ static irqreturn_t nidio_interrupt(int irq, void *d)
struct comedi_async *async = s->async;
struct mite_struct *mite = devpriv->mite;
//int i, j;
/* int i, j; */
long int AuxData = 0;
short data1 = 0;
short data2 = 0;
......@@ -496,9 +496,9 @@ static irqreturn_t nidio_interrupt(int irq, void *d)
unsigned int m_status = 0;
unsigned long irq_flags;
//interrupcions parasites
/* interrupcions parasites */
if (dev->attached == 0) {
// assume it's from another card
/* assume it's from another card */
return IRQ_NONE;
}
......@@ -511,8 +511,8 @@ static irqreturn_t nidio_interrupt(int irq, void *d)
ni_pcidio_print_flags(flags);
ni_pcidio_print_status(status);
//printk("buf[0]=%08x\n",*(unsigned int *)async->prealloc_buf);
//printk("buf[4096]=%08x\n",*(unsigned int *)(async->prealloc_buf+4096));
/* printk("buf[0]=%08x\n",*(unsigned int *)async->prealloc_buf); */
/* printk("buf[4096]=%08x\n",*(unsigned int *)(async->prealloc_buf+4096)); */
comedi_spin_lock_irqsave(&devpriv->mite_channel_lock, irq_flags);
if (devpriv->di_mite_chan)
......@@ -520,8 +520,8 @@ static irqreturn_t nidio_interrupt(int irq, void *d)
#ifdef MITE_DEBUG
mite_print_chsr(m_status);
#endif
//printk("mite_bytes_transferred: %d\n",mite_bytes_transferred(mite,DI_DMA_CHAN));
//mite_dump_regs(mite);
/* printk("mite_bytes_transferred: %d\n",mite_bytes_transferred(mite,DI_DMA_CHAN)); */
/* mite_dump_regs(mite); */
if (m_status & CHSR_INT) {
if (m_status & CHSR_LINKC) {
writel(CHOR_CLRLC,
......@@ -552,7 +552,7 @@ static irqreturn_t nidio_interrupt(int irq, void *d)
flags &= IntEn;
if (flags & TransferReady) {
//DPRINTK("TransferReady\n");
/* DPRINTK("TransferReady\n"); */
while (flags & TransferReady) {
work++;
if (work > 100) {
......@@ -569,14 +569,14 @@ static irqreturn_t nidio_interrupt(int irq, void *d)
data2 = (AuxData & 0xffff0000) >> 16;
comedi_buf_put(async, data1);
comedi_buf_put(async, data2);
//DPRINTK("read:%d, %d\n",data1,data2);
/* DPRINTK("read:%d, %d\n",data1,data2); */
flags = readb(devpriv->mite->daq_io_addr +
Group_1_Flags);
}
//DPRINTK("buf_int_count: %d\n",async->buf_int_count);
//DPRINTK("1) IntEn=%d,flags=%d,status=%d\n",IntEn,flags,status);
//ni_pcidio_print_flags(flags);
//ni_pcidio_print_status(status);
/* DPRINTK("buf_int_count: %d\n",async->buf_int_count); */
/* DPRINTK("1) IntEn=%d,flags=%d,status=%d\n",IntEn,flags,status); */
/* ni_pcidio_print_flags(flags); */
/* ni_pcidio_print_status(status); */
async->events |= COMEDI_CB_BLOCK;
}
......@@ -621,10 +621,10 @@ static irqreturn_t nidio_interrupt(int irq, void *d)
flags = readb(devpriv->mite->daq_io_addr + Group_1_Flags);
status = readb(devpriv->mite->daq_io_addr +
Interrupt_And_Window_Status);
//DPRINTK("loop end: IntEn=0x%02x,flags=0x%02x,status=0x%02x\n",
// IntEn,flags,status);
//ni_pcidio_print_flags(flags);
//ni_pcidio_print_status(status);
/* DPRINTK("loop end: IntEn=0x%02x,flags=0x%02x,status=0x%02x\n", */
/* IntEn,flags,status); */
/* ni_pcidio_print_flags(flags); */
/* ni_pcidio_print_status(status); */
}
out:
......@@ -963,7 +963,7 @@ static int ni_pcidio_cmd(struct comedi_device * dev, struct comedi_subdevice * s
/* clear and enable interrupts */
writeb(0xff, devpriv->mite->daq_io_addr + Group_1_First_Clear);
//writeb(ClearExpired,devpriv->mite->daq_io_addr+Group_1_Second_Clear);
/* writeb(ClearExpired,devpriv->mite->daq_io_addr+Group_1_Second_Clear); */
writeb(IntEn, devpriv->mite->daq_io_addr + Interrupt_Control);
writeb(0x03,
......@@ -971,7 +971,7 @@ static int ni_pcidio_cmd(struct comedi_device * dev, struct comedi_subdevice * s
if (cmd->stop_src == TRIG_NONE) {
devpriv->OpModeBits = DataLatching(0) | RunMode(7);
} else { // TRIG_TIMER
} else { /* TRIG_TIMER */
devpriv->OpModeBits = Numbered | RunMode(7);
}
if (cmd->start_src == TRIG_NOW) {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7