drm/amd/pm: fix possible power mode mismatch between driver and PMFW

PMFW may boots the ASIC with a different power mode from the system's
real one. Notify PMFW explicitly the power mode the system in. This
is needed only when ACDC switch via gpio is not supported.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c

@@ -733,6 +733,24 @@ static int smu_late_init(void *handle)
 		return ret;
 	}
 
+	/*
+	 * Explicitly notify PMFW the power mode the system in. Since
+	 * the PMFW may boot the ASIC with a different mode.
+	 * For those supporting ACDC switch via gpio, PMFW will
+	 * handle the switch automatically. Driver involvement
+	 * is unnecessary.
+	 */
+	if (!smu->dc_controlled_by_gpio) {
+		ret = smu_set_power_source(smu,
+					   adev->pm.ac_power ? SMU_POWER_SOURCE_AC :
+					   SMU_POWER_SOURCE_DC);
+		if (ret) {
+			dev_err(adev->dev, "Failed to switch to %s mode!\n",
+				adev->pm.ac_power ? "AC" : "DC");
+			return ret;
+		}
+	}
+
 	if ((adev->ip_versions[MP1_HWIP][0] == IP_VERSION(13, 0, 1)) ||
 	    (adev->ip_versions[MP1_HWIP][0] == IP_VERSION(13, 0, 3)))
 		return 0;

drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c

@@ -3413,26 +3413,8 @@ static int navi10_post_smu_init(struct smu_context *smu)
 		return 0;
 
 	ret = navi10_run_umc_cdr_workaround(smu);
-	if (ret) {
+	if (ret)
 		dev_err(adev->dev, "Failed to apply umc cdr workaround!\n");
-		return ret;
-	}
-
-	if (!smu->dc_controlled_by_gpio) {
-		/*
-		 * For Navi1X, manually switch it to AC mode as PMFW
-		 * may boot it with DC mode.
-		 */
-		ret = smu_v11_0_set_power_source(smu,
-						 adev->pm.ac_power ?
-						 SMU_POWER_SOURCE_AC :
-						 SMU_POWER_SOURCE_DC);
-		if (ret) {
-			dev_err(adev->dev, "Failed to switch to %s mode!\n",
-					adev->pm.ac_power ? "AC" : "DC");
-			return ret;
-		}
-	}
 
 	return ret;
 }

drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_7_ppt.c

@@ -1770,6 +1770,7 @@ static const struct pptable_funcs smu_v13_0_7_ppt_funcs = {
 	.enable_mgpu_fan_boost = smu_v13_0_7_enable_mgpu_fan_boost,
 	.get_power_limit = smu_v13_0_7_get_power_limit,
 	.set_power_limit = smu_v13_0_set_power_limit,
+	.set_power_source = smu_v13_0_set_power_source,
 	.get_power_profile_mode = smu_v13_0_7_get_power_profile_mode,
 	.set_power_profile_mode = smu_v13_0_7_set_power_profile_mode,
 	.set_tool_table_location = smu_v13_0_set_tool_table_location,