staging: comedi: 8253: mmio address is a void __iomem *

The inline functions for accessing a memory mapped 8254 device
are using a void * for the 'base_address' of the device. Memory
mapped io using the read/write functions should be using a
void __iomem * for the address.

Fixing these exposed a couple other void * / void __iomem *
issues in the ni_labpc driver.

This fixes a number of sparse warnings like:

  warning: incorrect type in argument 2 (different address spaces)
     expected void volatile [noderef] <asn:2>*addr
     got void *

  warning: incorrect type in argument 1 (different address spaces)
     expected void const volatile [noderef] <asn:2>*addr
     got void *<noident>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/8253.h

@@ -262,8 +262,10 @@ static inline int i8254_load(unsigned long base_address, unsigned int regshift,
 	return 0;
 }
 
-static inline int i8254_mm_load(void *base_address, unsigned int regshift,
-				unsigned int counter_number, unsigned int count,
+static inline int i8254_mm_load(void __iomem *base_address,
+				unsigned int regshift,
+				unsigned int counter_number,
+				unsigned int count,
 				unsigned int mode)
 {
 	unsigned int byte;
@@ -311,7 +313,8 @@ static inline int i8254_read(unsigned long base_address, unsigned int regshift,
 	return ret;
 }
 
-static inline int i8254_mm_read(void *base_address, unsigned int regshift,
+static inline int i8254_mm_read(void __iomem *base_address,
+				unsigned int regshift,
 				unsigned int counter_number)
 {
 	unsigned int byte;
@@ -348,7 +351,7 @@ static inline void i8254_write(unsigned long base_address,
 	outb(byte, base_address + (counter_number << regshift));
 }
 
-static inline void i8254_mm_write(void *base_address,
+static inline void i8254_mm_write(void __iomem *base_address,
 				  unsigned int regshift,
 				  unsigned int counter_number,
 				  unsigned int count)
@@ -390,7 +393,7 @@ static inline int i8254_set_mode(unsigned long base_address,
 	return 0;
 }
 
-static inline int i8254_mm_set_mode(void *base_address,
+static inline int i8254_mm_set_mode(void __iomem *base_address,
 				    unsigned int regshift,
 				    unsigned int counter_number,
 				    unsigned int mode)
@@ -419,7 +422,7 @@ static inline int i8254_status(unsigned long base_address,
 	return inb(base_address + (counter_number << regshift));
 }
 
-static inline int i8254_mm_status(void *base_address,
+static inline int i8254_mm_status(void __iomem *base_address,
 				  unsigned int regshift,
 				  unsigned int counter_number)
 {

drivers/staging/comedi/drivers/ni_labpc.c

@@ -409,12 +409,12 @@ static inline void labpc_outb(unsigned int byte, unsigned long address)
 
 static inline unsigned int labpc_readb(unsigned long address)
 {
-	return readb((void *)address);
+	return readb((void __iomem *)address);
 }
 
 static inline void labpc_writeb(unsigned int byte, unsigned long address)
 {
-	writeb(byte, (void *)address);
+	writeb(byte, (void __iomem *)address);
 }
 
 static const struct labpc_board_struct labpc_boards[] = {
@@ -494,8 +494,8 @@ static inline int labpc_counter_load(struct comedi_device *dev,
 				     unsigned int count, unsigned int mode)
 {
 	if (thisboard->memory_mapped_io)
-		return i8254_mm_load((void *)base_address, 0, counter_number,
-				     count, mode);
+		return i8254_mm_load((void __iomem *)base_address, 0,
+				     counter_number, count, mode);
 	else
 		return i8254_load(base_address, 0, counter_number, count, mode);
 }
@@ -1896,10 +1896,10 @@ static int labpc_dio_mem_callback(int dir, int port, int data,
 				  unsigned long iobase)
 {
 	if (dir) {
-		writeb(data, (void *)(iobase + port));
+		writeb(data, (void __iomem *)(iobase + port));
 		return 0;
 	} else {
-		return readb((void *)(iobase + port));
+		return readb((void __iomem *)(iobase + port));
 	}
 }