MIPS: Loongson2ef: Convert to early_printk_8250

early_printk.c is doing the same with early_printk_8250.
Remove duplicated code.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: chenhe@lemote.com

arch/mips/include/asm/mach-loongson2ef/loongson.h

@@ -21,7 +21,6 @@ extern void mach_prepare_shutdown(void);
 /* environment arguments from bootloader */
 extern u32 cpu_clock_freq;
 extern u32 memsize, highmemsize;
-extern const struct plat_smp_ops loongson3_smp_ops;
 
 /* loongson-specific command line, env and memory initialization */
 extern void __init prom_init_memory(void);

arch/mips/loongson2ef/Kconfig

@@ -23,6 +23,7 @@ config LEMOTE_FULOONG2E
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_HAS_EARLY_PRINTK
+	select USE_GENERIC_EARLY_PRINTK_8250
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select CPU_HAS_WB
 	select LOONGSON_MC146818
@@ -52,6 +53,7 @@ config LEMOTE_MACH2F
 	select ISA
 	select SYS_HAS_CPU_LOONGSON2F
 	select SYS_HAS_EARLY_PRINTK
+	select USE_GENERIC_EARLY_PRINTK_8250
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_LITTLE_ENDIAN

arch/mips/loongson2ef/common/Makefile

@@ -10,7 +10,6 @@ obj-$(CONFIG_PCI) += pci.o
 #
 # Serial port support
 #
-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
 obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o
 obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
 

arch/mips/loongson2ef/common/early_printk.c

-// SPDX-License-Identifier: GPL-2.0-or-later
-/*  early printk support
- *
- *  Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca>
- *  Copyright (c) 2009 Lemote Inc.
- *  Author: Wu Zhangjin, wuzhangjin@gmail.com
- */
-#include <linux/serial_reg.h>
-#include <asm/setup.h>
-
-#include <loongson.h>
-
-#define PORT(base, offset) (u8 *)(base + offset)
-
-static inline unsigned int serial_in(unsigned char *base, int offset)
-{
-	return readb(PORT(base, offset));
-}
-
-static inline void serial_out(unsigned char *base, int offset, int value)
-{
-	writeb(value, PORT(base, offset));
-}
-
-void prom_putchar(char c)
-{
-	int timeout;
-	unsigned char *uart_base;
-
-	uart_base = (unsigned char *)_loongson_uart_base;
-	timeout = 1024;
-
-	while (((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) &&
-			(timeout-- > 0))
-		;
-
-	serial_out(uart_base, UART_TX, c);
-}

arch/mips/loongson2ef/common/init.c

@@ -44,7 +44,6 @@ void __init prom_init(void)
 
 	/*init the uart base address */
 	prom_init_uart_base();
-	register_smp_ops(&loongson3_smp_ops);
 	board_nmi_handler_setup = mips_nmi_setup;
 }
 

arch/mips/loongson2ef/common/uart_base.c

@@ -6,6 +6,7 @@
 
 #include <linux/export.h>
 #include <asm/bootinfo.h>
+#include <asm/setup.h>
 
 #include <loongson.h>
 
@@ -38,4 +39,5 @@ void prom_init_loongson_uart_base(void)
 	}
 
 	_loongson_uart_base = TO_UNCAC(loongson_uart_base);
+	setup_8250_early_printk_port(_loongson_uart_base, 0, 1024);
 }