Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
 "I've been sitting on these longer than I meant, so the patch count is
  a bit higher than ideal for this part of the release. There's also
  some reverts of double-applied patches that brings the diffstat up a
  bit.

  With that said, the biggest changes are:

   - Revert of duplicate i2c device addition on two Aspeed (BMC)
     Devicetrees.

   - Move of two device nodes that got applied to the wrong part of the
     tree on ASpeed G6.

   - Regulator fix for Beaglebone X15 (adding 12/5V supplies)

   - Use interrupts for keys on Amlogic SM1 to avoid missed polls

  In addition to that, there is a collection of smaller DT fixes:

   - Power supply assignment fixes for i.MX6

   - Fix of interrupt line for magnetometer on i.MX8 Librem5 devkit

   - Build fixlets (selects) for davinci/omap2+

   - More interrupt number fixes for Stratix10, Amlogic SM1, etc.

   - ... and more similar fixes across different platforms

  And some non-DT stuff:

   - optee fix to register multiple shared pages properly

   - Clock calculation fixes for MMP3

   - Clock fixes for OMAP as well"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
  MAINTAINERS: Add myself as the co-maintainer for Actions Semi platforms
  ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support
  ARM: dts: imx6sll-evk: Remove incorrect power supply assignment
  ARM: dts: imx6sl-evk: Remove incorrect power supply assignment
  ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment
  ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment
  ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL
  ARM: omap2plus: select RESET_CONTROLLER
  ARM: davinci: select CONFIG_RESET_CONTROLLER
  ARM: dts: aspeed: rainier: Fix fan fault and presence
  ARM: dts: aspeed: rainier: Remove duplicate i2c busses
  ARM: dts: aspeed: tacoma: Remove duplicate flash nodes
  ARM: dts: aspeed: tacoma: Remove duplicate i2c busses
  ARM: dts: aspeed: tacoma: Fix fsi master node
  ARM: dts: aspeed-g6: Fix FSI master location
  ARM: dts: mmp3: Fix the TWSI ranges
  clk: mmp2: Fix the order of timer mux parents
  ARM: mmp: do not divide the clock rate
  arm64: dts: rockchip: Fix IR on Beelink A1
  optee: Fix multi page dynamic shm pool alloc
  ...

MAINTAINERS

@@ -1407,7 +1407,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
 
 ARM/ACTIONS SEMI ARCHITECTURE
 M:	Andreas Färber <afaerber@suse.de>
-R:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 N:	owl

arch/arm/boot/dts/am571x-idk.dts

@@ -167,11 +167,7 @@ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
 
 &pcie1_rc {
 	status = "okay";
-	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
-&pcie1_ep {
-	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+	gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
 };
 
 &mmc1 {

arch/arm/boot/dts/am572x-idk-common.dtsi

@@ -147,10 +147,6 @@ &pcie1_rc {
 	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
 };
 
-&pcie1_ep {
-	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
 &mailbox5 {
 	status = "okay";
 	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {

arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi

@@ -29,6 +29,27 @@ memory@0 {
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
+	main_12v0: fixedregulator-main_12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "main_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	evm_5v0: fixedregulator-evm_5v0 {
+		/* Output of TPS54531D */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vdd_3v3: fixedregulator-vdd_3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
@@ -547,10 +568,6 @@ &pcie1_rc {
 	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
 };
 
-&pcie1_ep {
-	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
-};
-
 &mcasp3 {
 	#sound-dai-cells = <0>;
 	assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;

arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts

@@ -258,9 +258,9 @@ fan@3 {
 		};
 	};
 
-	pca0: pca9552@60 {
+	pca0: pca9552@61 {
 		compatible = "nxp,pca9552";
-		reg = <0x60>;
+		reg = <0x61>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -519,371 +519,6 @@ &i2c12 {
 	status = "okay";
 };
 
-&i2c13 {
-	status = "okay";
-};
-
-&i2c14 {
-	status = "okay";
-};
-
-&i2c15 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-
-	power-supply@68 {
-		compatible = "ibm,cffps2";
-		reg = <0x68>;
-	};
-
-	power-supply@69 {
-		compatible = "ibm,cffps2";
-		reg = <0x69>;
-	};
-
-	power-supply@6a {
-		compatible = "ibm,cffps2";
-		reg = <0x6a>;
-	};
-
-	power-supply@6b {
-		compatible = "ibm,cffps2";
-		reg = <0x6b>;
-	};
-};
-
-&i2c4 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@49 {
-		compatible = "ti,tmp275";
-		reg = <0x49>;
-	};
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-};
-
-&i2c5 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@49 {
-		compatible = "ti,tmp275";
-		reg = <0x49>;
-	};
-};
-
-&i2c6 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-
-	tmp275@4b {
-		compatible = "ti,tmp275";
-		reg = <0x4b>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-
-	si7021-a20@20 {
-		compatible = "silabs,si7020";
-		reg = <0x20>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	max31785@52 {
-		compatible = "maxim,max31785a";
-		reg = <0x52>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fan@0 {
-			compatible = "pmbus-fan";
-			reg = <0>;
-			tach-pulses = <2>;
-		};
-
-		fan@1 {
-			compatible = "pmbus-fan";
-			reg = <1>;
-			tach-pulses = <2>;
-		};
-
-		fan@2 {
-			compatible = "pmbus-fan";
-			reg = <2>;
-			tach-pulses = <2>;
-		};
-
-		fan@3 {
-			compatible = "pmbus-fan";
-			reg = <3>;
-			tach-pulses = <2>;
-		};
-	};
-
-	pca0: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-		};
-	};
-
-	dps: dps310@76 {
-		compatible = "infineon,dps310";
-		reg = <0x76>;
-		#io-channel-cells = <0>;
-	};
-};
-
-&i2c8 {
-	status = "okay";
-
-	ucd90320@b {
-		compatible = "ti,ucd90160";
-		reg = <0x0b>;
-	};
-
-	ucd90320@c {
-		compatible = "ti,ucd90160";
-		reg = <0x0c>;
-	};
-
-	ucd90320@11 {
-		compatible = "ti,ucd90160";
-		reg = <0x11>;
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-};
-
-&i2c9 {
-	status = "okay";
-
-	ir35221@42 {
-		compatible = "infineon,ir35221";
-		reg = <0x42>;
-	};
-
-	ir35221@43 {
-		compatible = "infineon,ir35221";
-		reg = <0x43>;
-	};
-
-	ir35221@44 {
-		compatible = "infineon,ir35221";
-		reg = <0x44>;
-	};
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	tmp423b@4d {
-		compatible = "ti,tmp423";
-		reg = <0x4d>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-	ir35221@73 {
-		compatible = "infineon,ir35221";
-		reg = <0x73>;
-	};
-
-	ir35221@74 {
-		compatible = "infineon,ir35221";
-		reg = <0x74>;
-	};
-};
-
-&i2c10 {
-	status = "okay";
-
-	ir35221@42 {
-		compatible = "infineon,ir35221";
-		reg = <0x42>;
-	};
-
-	ir35221@43 {
-		compatible = "infineon,ir35221";
-		reg = <0x43>;
-	};
-
-	ir35221@44 {
-		compatible = "infineon,ir35221";
-		reg = <0x44>;
-	};
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	tmp423b@4d {
-		compatible = "ti,tmp423";
-		reg = <0x4d>;
-	};
-
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-	ir35221@73 {
-		compatible = "infineon,ir35221";
-		reg = <0x73>;
-	};
-
-	ir35221@74 {
-		compatible = "infineon,ir35221";
-		reg = <0x74>;
-	};
-};
-
-&i2c11 {
-	status = "okay";
-
-	tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tmp275@49 {
-		compatible = "ti,tmp275";
-		reg = <0x49>;
-	};
-};
-
-&i2c12 {
-	status = "okay";
-};
-
 &i2c13 {
 	status = "okay";
 

arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts

@@ -122,37 +122,6 @@ flash@0 {
 	};
 };
 
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-128.dtsi"
-	};
-
-	flash@1 {
-		status = "okay";
-		m25p,fast-read;
-		label = "alt-bmc";
-		spi-max-frequency = <50000000>;
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-		spi-max-frequency = <100000000>;
-	};
-};
-
 &mac2 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -165,6 +134,11 @@ &mac2 {
 
 &emmc {
 	status = "okay";
+};
+
+&fsim0 {
+	status = "okay";
+
 	#address-cells = <2>;
 	#size-cells = <0>;
 
@@ -820,373 +794,6 @@ &wdt2 {
 	status = "okay";
 };
 
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&i2c3 {
-	status = "okay";
-
-	bmp: bmp280@77 {
-		compatible = "bosch,bmp280";
-		reg = <0x77>;
-		#io-channel-cells = <1>;
-	};
-
-	max31785@52 {
-		compatible = "maxim,max31785a";
-		reg = <0x52>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		fan@0 {
-			compatible = "pmbus-fan";
-			reg = <0>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-dual-tach;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@1 {
-			compatible = "pmbus-fan";
-			reg = <1>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-dual-tach;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@2 {
-			compatible = "pmbus-fan";
-			reg = <2>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-dual-tach;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-
-		fan@3 {
-			compatible = "pmbus-fan";
-			reg = <3>;
-			tach-pulses = <2>;
-			maxim,fan-rotor-input = "tach";
-			maxim,fan-pwm-freq = <25000>;
-			maxim,fan-dual-tach;
-			maxim,fan-no-watchdog;
-			maxim,fan-no-fault-ramp;
-			maxim,fan-ramp = <2>;
-			maxim,fan-fault-pin-mon;
-		};
-	};
-
-	dps: dps310@76 {
-		compatible = "infineon,dps310";
-		reg = <0x76>;
-		#io-channel-cells = <0>;
-	};
-
-	pca0: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	power-supply@68 {
-		compatible = "ibm,cffps1";
-		reg = <0x68>;
-	};
-
-	power-supply@69 {
-		compatible = "ibm,cffps1";
-		reg = <0x69>;
-	};
-};
-
-&i2c4 {
-	status = "okay";
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	ir35221@70 {
-		compatible = "infineon,ir35221";
-		reg = <0x70>;
-	};
-
-	ir35221@71 {
-		compatible = "infineon,ir35221";
-		reg = <0x71>;
-	};
-};
-
-&i2c5 {
-	status = "okay";
-
-	tmp423a@4c {
-		compatible = "ti,tmp423";
-		reg = <0x4c>;
-	};
-
-	ir35221@70 {
-		compatible = "infineon,ir35221";
-		reg = <0x70>;
-	};
-
-	ir35221@71 {
-		compatible = "infineon,ir35221";
-		reg = <0x71>;
-	};
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c9 {
-	status = "okay";
-
-	tmp275@4a {
-		compatible = "ti,tmp275";
-		reg = <0x4a>;
-	};
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-
-	pca9552: pca9552@60 {
-		compatible = "nxp,pca9552";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
-			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
-			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
-			"GPU4_TH_OVERT_N_BUFF",	"GPU5_TH_OVERT_N_BUFF",
-			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
-			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
-			"GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
-			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
-
-		gpio@0 {
-			reg = <0>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@1 {
-			reg = <1>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@2 {
-			reg = <2>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@3 {
-			reg = <3>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@4 {
-			reg = <4>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@5 {
-			reg = <5>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@6 {
-			reg = <6>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@7 {
-			reg = <7>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@8 {
-			reg = <8>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@9 {
-			reg = <9>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@10 {
-			reg = <10>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@11 {
-			reg = <11>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@12 {
-			reg = <12>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@13 {
-			reg = <13>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@14 {
-			reg = <14>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-
-		gpio@15 {
-			reg = <15>;
-			type = <PCA955X_TYPE_GPIO>;
-		};
-	};
-
-	rtc@32 {
-		compatible = "epson,rx8900";
-		reg = <0x32>;
-	};
-
-	eeprom@51 {
-		compatible = "atmel,24c64";
-		reg = <0x51>;
-	};
-
-	ucd90160@64 {
-		compatible = "ti,ucd90160";
-		reg = <0x64>;
-	};
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
-
 &pinctrl {
 	/* Hog these as no driver is probed for the entire LPC block */
 	pinctrl-names = "default";

arch/arm/boot/dts/aspeed-g6.dtsi

@@ -163,26 +163,6 @@ flash@2 {
 				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
-
-			fsim0: fsi@1e79b000 {
-				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
-				reg = <0x1e79b000 0x94>;
-				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_fsi1_default>;
-				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
-				status = "disabled";
-			};
-
-			fsim1: fsi@1e79b100 {
-				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
-				reg = <0x1e79b100 0x94>;
-				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_fsi2_default>;
-				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
-				status = "disabled";
-			};
 		};
 
 		mdio0: mdio@1e650000 {
@@ -595,6 +575,25 @@ i2c: bus@1e78a000 {
 				ranges = <0 0x1e78a000 0x1000>;
 			};
 
+			fsim0: fsi@1e79b000 {
+				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+				reg = <0x1e79b000 0x94>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fsi1_default>;
+				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+				status = "disabled";
+			};
+
+			fsim1: fsi@1e79b100 {
+				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+				reg = <0x1e79b100 0x94>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fsi2_default>;
+				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+				status = "disabled";
+			};
 		};
 	};
 };

arch/arm/boot/dts/imx6dl-icore-mipi.dts

@@ -8,7 +8,7 @@
 /dts-v1/;
 
 #include "imx6dl.dtsi"
-#include "imx6qdl-icore.dtsi"
+#include "imx6qdl-icore-1.5.dtsi"
 
 / {
 	model = "Engicam i.CoreM6 DualLite/Solo MIPI Starter Kit";

arch/arm/boot/dts/imx6q-dhcom-pdk2.dts

@@ -63,7 +63,7 @@ sgtl5000: codec@a {
 		#sound-dai-cells = <0>;
 		clocks = <&clk_ext_audio_codec>;
 		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
+		VDDIO-supply = <&sw2_reg>;
 	};
 };
 

arch/arm/boot/dts/imx6q-dhcom-som.dtsi

@@ -204,7 +204,7 @@ eeprom@50 {
 	};
 
 	rtc@56 {
-		compatible = "rv3029c2";
+		compatible = "microcrystal,rv3029";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_rtc_hw300>;
 		reg = <0x56>;

arch/arm/boot/dts/imx6qdl-sabresd.dtsi

@@ -749,10 +749,6 @@ &reg_vdd1p1 {
 	vin-supply = <&vgen5_reg>;
 };
 
-&reg_vdd3p0 {
-	vin-supply = <&sw2_reg>;
-};
-
 &reg_vdd2p5 {
 	vin-supply = <&vgen5_reg>;
 };

arch/arm/boot/dts/imx6sl-evk.dts

@@ -584,10 +584,6 @@ &reg_vdd1p1 {
 	vin-supply = <&sw2_reg>;
 };
 
-&reg_vdd3p0 {
-	vin-supply = <&sw2_reg>;
-};
-
 &reg_vdd2p5 {
 	vin-supply = <&sw2_reg>;
 };

arch/arm/boot/dts/imx6sll-evk.dts

@@ -265,10 +265,6 @@ &pwm1 {
 	status = "okay";
 };
 
-&reg_3p0 {
-	vin-supply = <&sw2_reg>;
-};
-
 &snvs_poweroff {
 	status = "okay";
 };

arch/arm/boot/dts/imx6sx-sdb-reva.dts

@@ -159,10 +159,6 @@ &reg_vdd1p1 {
 	vin-supply = <&vgen6_reg>;
 };
 
-&reg_vdd3p0 {
-	vin-supply = <&sw2_reg>;
-};
-
 &reg_vdd2p5 {
 	vin-supply = <&vgen6_reg>;
 };

arch/arm/boot/dts/imx6sx-sdb.dts

@@ -141,10 +141,6 @@ &reg_vdd1p1 {
 	vin-supply = <&vgen6_reg>;
 };
 
-&reg_vdd3p0 {
-	vin-supply = <&sw2_reg>;
-};
-
 &reg_vdd2p5 {
 	vin-supply = <&vgen6_reg>;
 };

arch/arm/boot/dts/imx7s-colibri.dtsi

@@ -49,3 +49,7 @@ memory@80000000 {
 		reg = <0x80000000 0x10000000>;
 	};
 };
+
+&gpmi {
+	status = "okay";
+};

arch/arm/boot/dts/imx7ulp.dtsi

@@ -37,10 +37,10 @@ cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu0: cpu@0 {
+		cpu0: cpu@f00 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
-			reg = <0>;
+			reg = <0xf00>;
 		};
 	};
 

arch/arm/boot/dts/meson8.dtsi

@@ -253,7 +253,7 @@ mali: gpu@c0000 {
 &aobus {
 	pmu: pmu@e0 {
 		compatible = "amlogic,meson8-pmu", "syscon";
-		reg = <0xe0 0x8>;
+		reg = <0xe0 0x18>;
 	};
 
 	pinctrl_aobus: pinctrl@84 {

arch/arm/boot/dts/mmp3.dtsi

@@ -356,7 +356,7 @@ gcb5: gpio@d4019108 {
 
 			twsi1: i2c@d4011000 {
 				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4011000 0x1000>;
+				reg = <0xd4011000 0x70>;
 				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&soc_clocks MMP2_CLK_TWSI0>;
 				resets = <&soc_clocks MMP2_CLK_TWSI0>;
@@ -368,7 +368,7 @@ twsi1: i2c@d4011000 {
 
 			twsi2: i2c@d4031000 {
 				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4031000 0x1000>;
+				reg = <0xd4031000 0x70>;
 				interrupt-parent = <&twsi_mux>;
 				interrupts = <0>;
 				clocks = <&soc_clocks MMP2_CLK_TWSI1>;
@@ -380,7 +380,7 @@ twsi2: i2c@d4031000 {
 
 			twsi3: i2c@d4032000 {
 				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4032000 0x1000>;
+				reg = <0xd4032000 0x70>;
 				interrupt-parent = <&twsi_mux>;
 				interrupts = <1>;
 				clocks = <&soc_clocks MMP2_CLK_TWSI2>;
@@ -392,7 +392,7 @@ twsi3: i2c@d4032000 {
 
 			twsi4: i2c@d4033000 {
 				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4033000 0x1000>;
+				reg = <0xd4033000 0x70>;
 				interrupt-parent = <&twsi_mux>;
 				interrupts = <2>;
 				clocks = <&soc_clocks MMP2_CLK_TWSI3>;
@@ -405,7 +405,7 @@ twsi4: i2c@d4033000 {
 
 			twsi5: i2c@d4033800 {
 				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4033800 0x1000>;
+				reg = <0xd4033800 0x70>;
 				interrupt-parent = <&twsi_mux>;
 				interrupts = <3>;
 				clocks = <&soc_clocks MMP2_CLK_TWSI4>;
@@ -417,7 +417,7 @@ twsi5: i2c@d4033800 {
 
 			twsi6: i2c@d4034000 {
 				compatible = "mrvl,mmp-twsi";
-				reg = <0xd4034000 0x1000>;
+				reg = <0xd4034000 0x70>;
 				interrupt-parent = <&twsi_mux>;
 				interrupts = <4>;
 				clocks = <&soc_clocks MMP2_CLK_TWSI5>;

arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts

@@ -101,7 +101,7 @@ usb-hub {
 		initial-mode = <1>; /* initialize in HUB mode */
 		disabled-ports = <1>;
 		intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
-		reset-gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */
+		reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
 		connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */
 		refclk-frequency = <19200000>;
 	};

arch/arm/mach-davinci/Kconfig

@@ -9,6 +9,7 @@ menuconfig ARCH_DAVINCI
 	select PM_GENERIC_DOMAINS if PM
 	select PM_GENERIC_DOMAINS_OF if PM && OF
 	select REGMAP_MMIO
+	select RESET_CONTROLLER
 	select HAVE_IDE
 	select PINCTRL_SINGLE
 

arch/arm/mach-mmp/time.c

@@ -207,7 +207,7 @@ static int __init mmp_dt_init_timer(struct device_node *np)
 		ret = clk_prepare_enable(clk);
 		if (ret)
 			return ret;
-		rate = clk_get_rate(clk) / 2;
+		rate = clk_get_rate(clk);
 	} else if (cpu_is_pj4()) {
 		rate = 6500000;
 	} else {

arch/arm/mach-omap2/Kconfig

@@ -95,6 +95,7 @@ config ARCH_OMAP2PLUS
 	bool
 	select ARCH_HAS_BANDGAP
 	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_OMAP
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
@@ -105,11 +106,11 @@ config ARCH_OMAP2PLUS
 	select OMAP_DM_TIMER
 	select OMAP_GPMC
 	select PINCTRL
+	select RESET_CONTROLLER
 	select SOC_BUS
 	select TI_SYSC
 	select OMAP_IRQCHIP
 	select CLKSRC_TI_32K
-	select ARCH_HAS_RESET_CONTROLLER
 	help
 	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
 

arch/arm/mach-omap2/pdata-quirks.c

@@ -306,10 +306,14 @@ static void __init dra7x_evm_mmc_quirk(void)
 
 static struct clockdomain *ti_sysc_find_one_clockdomain(struct clk *clk)
 {
+	struct clk_hw *hw = __clk_get_hw(clk);
 	struct clockdomain *clkdm = NULL;
 	struct clk_hw_omap *hwclk;
 
-	hwclk = to_clk_hw_omap(__clk_get_hw(clk));
+	hwclk = to_clk_hw_omap(hw);
+	if (!omap2_clk_is_hw_omap(hw))
+		return NULL;
+
 	if (hwclk && hwclk->clkdm_name)
 		clkdm = clkdm_lookup(hwclk->clkdm_name);
 

arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino-emmc.dts

@@ -15,7 +15,7 @@ &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
 	vmmc-supply = <&reg_dcdc1>;
-	vqmmc-supply = <&reg_dcdc1>;
+	vqmmc-supply = <&reg_eldo1>;
 	bus-width = <8>;
 	non-removable;
 	cap-mmc-hw-reset;

arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts

@@ -140,7 +140,7 @@ &mmc0 {
 &mmc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	vmmc-supply = <&reg_aldo2>;
+	vmmc-supply = <&reg_dcdc1>;
 	vqmmc-supply = <&reg_dldo4>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	bus-width = <4>;

arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi

@@ -61,10 +61,10 @@ cpu3: cpu@3 {
 
 	pmu {
 		compatible = "arm,armv8-pmuv3";
-		interrupts = <0 120 8>,
-			     <0 121 8>,
-			     <0 122 8>,
-			     <0 123 8>;
+		interrupts = <0 170 4>,
+			     <0 171 4>,
+			     <0 172 4>,
+			     <0 173 4>;
 		interrupt-affinity = <&cpu0>,
 				     <&cpu1>,
 				     <&cpu2>,

arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts

@@ -46,25 +46,47 @@ emmc_pwrseq: emmc-pwrseq {
 	};
 
 	gpio-keys {
-		compatible = "gpio-keys-polled";
-		poll-interval = <100>;
+		compatible = "gpio-keys";
 
 		key1 {
 			label = "A";
 			linux,code = <BTN_0>;
 			gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <34 IRQ_TYPE_EDGE_BOTH>;
 		};
 
 		key2 {
 			label = "B";
 			linux,code = <BTN_1>;
 			gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <35 IRQ_TYPE_EDGE_BOTH>;
 		};
 
 		key3 {
 			label = "C";
 			linux,code = <BTN_2>;
 			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
+		};
+
+		mic_mute {
+			label = "MicMute";
+			linux,code = <SW_MUTE_DEVICE>;
+			linux,input-type = <EV_SW>;
+			gpios = <&gpio_ao GPIOE_2 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <99 IRQ_TYPE_EDGE_BOTH>;
+		};
+
+		power_key {
+			label = "PowerKey";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio_intc>;
+			interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
 		};
 	};
 
@@ -569,6 +591,8 @@ &uart_A {
 
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
 		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		max-speed = <2000000>;
 		clocks = <&wifi32k>;

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi

@@ -175,7 +175,7 @@ ddr: memory-controller@1080000 {
 		dcfg: syscon@1e00000 {
 			compatible = "fsl,ls1028a-dcfg", "syscon";
 			reg = <0x0 0x1e00000 0x0 0x10000>;
-			big-endian;
+			little-endian;
 		};
 
 		rst: syscon@1e60000 {

arch/arm64/boot/dts/freescale/imx8mm.dtsi

@@ -740,7 +740,7 @@ sdma1: dma-controller@30bd0000 {
 				reg = <0x30bd0000 0x10000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
-					 <&clk IMX8MM_CLK_SDMA1_ROOT>;
+					 <&clk IMX8MM_CLK_AHB>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";

arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts

@@ -421,7 +421,7 @@ magnetometer@1e	{
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_imu>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
 		vdd-supply = <&reg_3v3_p>;
 		vddio-supply = <&reg_3v3_p>;
 	};

arch/arm64/boot/dts/intel/socfpga_agilex.dtsi

@@ -60,10 +60,10 @@ cpu3: cpu@3 {
 
 	pmu {
 		compatible = "arm,armv8-pmuv3";
-		interrupts = <0 120 8>,
-			     <0 121 8>,
-			     <0 122 8>,
-			     <0 123 8>;
+		interrupts = <0 170 4>,
+			     <0 171 4>,
+			     <0 172 4>,
+			     <0 173 4>;
 		interrupt-affinity = <&cpu0>,
 				     <&cpu1>,
 				     <&cpu2>,

arch/arm64/boot/dts/rockchip/rk3328-a1.dts

@@ -49,7 +49,8 @@ vcc_sys: vcc-sys {
 
 	ir-receiver {
 		compatible = "gpio-ir-receiver";
-		gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+		linux,rc-map-name = "rc-beelink-gs1";
 	};
 };
 

drivers/bus/ti-sysc.c

@@ -343,6 +343,12 @@ static int sysc_get_clocks(struct sysc *ddata)
 		return -EINVAL;
 	}
 
+	/* Always add a slot for main clocks fck and ick even if unused */
+	if (!nr_fck)
+		ddata->nr_clocks++;
+	if (!nr_ick)
+		ddata->nr_clocks++;
+
 	ddata->clocks = devm_kcalloc(ddata->dev,
 				     ddata->nr_clocks, sizeof(*ddata->clocks),
 				     GFP_KERNEL);
@@ -421,7 +427,7 @@ static int sysc_enable_opt_clocks(struct sysc *ddata)
 	struct clk *clock;
 	int i, error;
 
-	if (!ddata->clocks)
+	if (!ddata->clocks || ddata->nr_clocks < SYSC_OPTFCK0 + 1)
 		return 0;
 
 	for (i = SYSC_OPTFCK0; i < SYSC_MAX_CLOCKS; i++) {
@@ -455,7 +461,7 @@ static void sysc_disable_opt_clocks(struct sysc *ddata)
 	struct clk *clock;
 	int i;
 
-	if (!ddata->clocks)
+	if (!ddata->clocks || ddata->nr_clocks < SYSC_OPTFCK0 + 1)
 		return;
 
 	for (i = SYSC_OPTFCK0; i < SYSC_MAX_CLOCKS; i++) {

drivers/clk/mmp/clk-of-mmp2.c

@@ -134,7 +134,7 @@ static DEFINE_SPINLOCK(ssp3_lock);
 static const char *ssp_parent_names[] = {"vctcxo_4", "vctcxo_2", "vctcxo", "pll1_16"};
 
 static DEFINE_SPINLOCK(timer_lock);
-static const char *timer_parent_names[] = {"clk32", "vctcxo_2", "vctcxo_4", "vctcxo"};
+static const char *timer_parent_names[] = {"clk32", "vctcxo_4", "vctcxo_2", "vctcxo"};
 
 static DEFINE_SPINLOCK(reset_lock);
 

drivers/soc/amlogic/meson-ee-pwrc.c

@@ -323,6 +323,8 @@ static int meson_ee_pwrc_init_domain(struct platform_device *pdev,
 				     struct meson_ee_pwrc *pwrc,
 				     struct meson_ee_pwrc_domain *dom)
 {
+	int ret;
+
 	dom->pwrc = pwrc;
 	dom->num_rstc = dom->desc.reset_names_count;
 	dom->num_clks = dom->desc.clk_names_count;
@@ -368,15 +370,21 @@ static int meson_ee_pwrc_init_domain(struct platform_device *pdev,
          * prepare/enable counters won't be in sync.
          */
 	if (dom->num_clks && dom->desc.get_power && !dom->desc.get_power(dom)) {
-		int ret = clk_bulk_prepare_enable(dom->num_clks, dom->clks);
+		ret = clk_bulk_prepare_enable(dom->num_clks, dom->clks);
 		if (ret)
 			return ret;
 
-		pm_genpd_init(&dom->base, &pm_domain_always_on_gov, false);
-	} else
-		pm_genpd_init(&dom->base, NULL,
-			      (dom->desc.get_power ?
-			       dom->desc.get_power(dom) : true));
+		ret = pm_genpd_init(&dom->base, &pm_domain_always_on_gov,
+				    false);
+		if (ret)
+			return ret;
+	} else {
+		ret = pm_genpd_init(&dom->base, NULL,
+				    (dom->desc.get_power ?
+				     dom->desc.get_power(dom) : true));
+		if (ret)
+			return ret;
+	}
 
 	return 0;
 }
@@ -441,9 +449,7 @@ static int meson_ee_pwrc_probe(struct platform_device *pdev)
 		pwrc->xlate.domains[i] = &dom->base;
 	}
 
-	of_genpd_add_provider_onecell(pdev->dev.of_node, &pwrc->xlate);
-
-	return 0;
+	return of_genpd_add_provider_onecell(pdev->dev.of_node, &pwrc->xlate);
 }
 
 static void meson_ee_pwrc_shutdown(struct platform_device *pdev)

drivers/soc/ti/wkup_m3_ipc.c

@@ -419,6 +419,8 @@ static void wkup_m3_rproc_boot_thread(struct wkup_m3_ipc *m3_ipc)
 	ret = rproc_boot(m3_ipc->rproc);
 	if (ret)
 		dev_err(dev, "rproc_boot failed\n");
+	else
+		m3_ipc_state = m3_ipc;
 
 	do_exit(0);
 }
@@ -505,8 +507,6 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev)
 		goto err_put_rproc;
 	}
 
-	m3_ipc_state = m3_ipc;
-
 	return 0;
 
 err_put_rproc:

drivers/tee/optee/shm_pool.c

@@ -28,9 +28,22 @@ static int pool_op_alloc(struct tee_shm_pool_mgr *poolm,
 	shm->size = PAGE_SIZE << order;
 
 	if (shm->flags & TEE_SHM_DMA_BUF) {
+		unsigned int nr_pages = 1 << order, i;
+		struct page **pages;
+
+		pages = kcalloc(nr_pages, sizeof(pages), GFP_KERNEL);
+		if (!pages)
+			return -ENOMEM;
+
+		for (i = 0; i < nr_pages; i++) {
+			pages[i] = page;
+			page++;
+		}
+
 		shm->flags |= TEE_SHM_REGISTER;
-		rc = optee_shm_register(shm->ctx, shm, &page, 1 << order,
+		rc = optee_shm_register(shm->ctx, shm, pages, nr_pages,
 					(unsigned long)shm->kaddr);
+		kfree(pages);
 	}
 
 	return rc;

include/dt-bindings/reset/amlogic,meson8b-reset.h

@@ -46,9 +46,9 @@
 #define RESET_VD_RMEM			64
 #define RESET_AUDIN			65
 #define RESET_DBLK			66
-#define RESET_PIC_DC			66
-#define RESET_PSC			66
-#define RESET_NAND			66
+#define RESET_PIC_DC			67
+#define RESET_PSC			68
+#define RESET_NAND			69
 #define RESET_GE2D			70
 #define RESET_PARSER_REG		71
 #define RESET_PARSER_FETCH		72