Commit 575a2929 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'tty-3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
 "Here are a number of small tty/serial driver fixes for 3.15-rc2.  Also
  in here are some Documentation file removals for drivers that we
  removed a long time ago, no need to keep it around any longer.

  All of these have been in linux-next for a bit"

* tag 'tty-3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "serial: 8250, disable "too much work" messages"
  serial: amba-pl011: fix regression, causing an Oops on rmmod
  tty: Fix help text of SYNCLINK_CS
  tty: fix memleak in alloc_pid
  ttyprintk: Allow built as a module
  ttyprintk: Fix wrong tty_unregister_driver() call in the error path
  serial: 8250, disable "too much work" messages
  Documentation/serial: Delete obsolete driver documentation
  serial: omap: Fix missing pm_runtime_resume handling by simplifying code
  serial_core: Fix pm imbalance on unbind
  serial: pl011: change Rx burst size to half of trigger level
  serial: timberdale: Depend on X86_32
  serial: st-asc: Fix SysRq char handling
  Revert "serial: clps711x: Give a chance to perform useful tasks during wait loop"
  serial_core: Fix conditional start_tx on ring buffer not empty
  serial: efm32: use $vendor,$device scheme for compatible string
  serial: omap: free the wakeup settings in remove
parents 7e55f81e 12de375e
* Energymicro efm32 UART * Energymicro efm32 UART
Required properties: Required properties:
- compatible : Should be "efm32,uart" - compatible : Should be "energymicro,efm32-uart"
- reg : Address and length of the register set - reg : Address and length of the register set
- interrupts : Should contain uart interrupt - interrupts : Should contain uart interrupt
...@@ -13,7 +13,7 @@ Optional properties: ...@@ -13,7 +13,7 @@ Optional properties:
Example: Example:
uart@0x4000c400 { uart@0x4000c400 {
compatible = "efm32,uart"; compatible = "energymicro,efm32-uart";
reg = <0x4000c400 0x400>; reg = <0x4000c400 0x400>;
interrupts = <15>; interrupts = <15>;
efm32,location = <0>; efm32,location = <0>;
......
...@@ -804,13 +804,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. ...@@ -804,13 +804,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
dhash_entries= [KNL] dhash_entries= [KNL]
Set number of hash buckets for dentry cache. Set number of hash buckets for dentry cache.
digi= [HW,SERIAL]
IO parameters + enable/disable command.
digiepca= [HW,SERIAL]
See drivers/char/README.epca and
Documentation/serial/digiepca.txt.
disable= [IPV6] disable= [IPV6]
See Documentation/networking/ipv6.txt. See Documentation/networking/ipv6.txt.
...@@ -2939,9 +2932,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. ...@@ -2939,9 +2932,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
rhash_entries= [KNL,NET] rhash_entries= [KNL,NET]
Set number of hash buckets for route cache Set number of hash buckets for route cache
riscom8= [HW,SERIAL]
Format: <io_board1>[,<io_board2>[,...<io_boardN>]]
ro [KNL] Mount root device read-only on boot ro [KNL] Mount root device read-only on boot
root= [KNL] Root filesystem root= [KNL] Root filesystem
...@@ -3083,9 +3073,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. ...@@ -3083,9 +3073,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
sonypi.*= [HW] Sony Programmable I/O Control Device driver sonypi.*= [HW] Sony Programmable I/O Control Device driver
See Documentation/laptops/sonypi.txt See Documentation/laptops/sonypi.txt
specialix= [HW,SERIAL] Specialix multi-serial port adapter
See Documentation/serial/specialix.txt.
spia_io_base= [HW,MTD] spia_io_base= [HW,MTD]
spia_fio_base= spia_fio_base=
spia_pedr= spia_pedr=
......
...@@ -63,8 +63,6 @@ Magic Name Number Structure File ...@@ -63,8 +63,6 @@ Magic Name Number Structure File
PG_MAGIC 'P' pg_{read,write}_hdr include/linux/pg.h PG_MAGIC 'P' pg_{read,write}_hdr include/linux/pg.h
CMAGIC 0x0111 user include/linux/a.out.h CMAGIC 0x0111 user include/linux/a.out.h
MKISS_DRIVER_MAGIC 0x04bf mkiss_channel drivers/net/mkiss.h MKISS_DRIVER_MAGIC 0x04bf mkiss_channel drivers/net/mkiss.h
RISCOM8_MAGIC 0x0907 riscom_port drivers/char/riscom8.h
SPECIALIX_MAGIC 0x0907 specialix_port drivers/char/specialix_io8.h
HDLC_MAGIC 0x239e n_hdlc drivers/char/n_hdlc.c HDLC_MAGIC 0x239e n_hdlc drivers/char/n_hdlc.c
APM_BIOS_MAGIC 0x4101 apm_user arch/x86/kernel/apm_32.c APM_BIOS_MAGIC 0x4101 apm_user arch/x86/kernel/apm_32.c
CYCLADES_MAGIC 0x4359 cyclades_port include/linux/cyclades.h CYCLADES_MAGIC 0x4359 cyclades_port include/linux/cyclades.h
...@@ -82,7 +80,6 @@ STRIP_MAGIC 0x5303 strip drivers/net/strip.c ...@@ -82,7 +80,6 @@ STRIP_MAGIC 0x5303 strip drivers/net/strip.c
X25_ASY_MAGIC 0x5303 x25_asy drivers/net/x25_asy.h X25_ASY_MAGIC 0x5303 x25_asy drivers/net/x25_asy.h
SIXPACK_MAGIC 0x5304 sixpack drivers/net/hamradio/6pack.h SIXPACK_MAGIC 0x5304 sixpack drivers/net/hamradio/6pack.h
AX25_MAGIC 0x5316 ax_disp drivers/net/mkiss.h AX25_MAGIC 0x5316 ax_disp drivers/net/mkiss.h
ESP_MAGIC 0x53ee esp_struct drivers/char/esp.h
TTY_MAGIC 0x5401 tty_struct include/linux/tty.h TTY_MAGIC 0x5401 tty_struct include/linux/tty.h
MGSL_MAGIC 0x5401 mgsl_info drivers/char/synclink.c MGSL_MAGIC 0x5401 mgsl_info drivers/char/synclink.c
TTY_DRIVER_MAGIC 0x5402 tty_driver include/linux/tty_driver.h TTY_DRIVER_MAGIC 0x5402 tty_driver include/linux/tty_driver.h
...@@ -94,13 +91,10 @@ USB_BLUETOOTH_MAGIC 0x6d02 usb_bluetooth drivers/usb/class/bluetty.c ...@@ -94,13 +91,10 @@ USB_BLUETOOTH_MAGIC 0x6d02 usb_bluetooth drivers/usb/class/bluetty.c
RFCOMM_TTY_MAGIC 0x6d02 net/bluetooth/rfcomm/tty.c RFCOMM_TTY_MAGIC 0x6d02 net/bluetooth/rfcomm/tty.c
USB_SERIAL_PORT_MAGIC 0x7301 usb_serial_port drivers/usb/serial/usb-serial.h USB_SERIAL_PORT_MAGIC 0x7301 usb_serial_port drivers/usb/serial/usb-serial.h
CG_MAGIC 0x00090255 ufs_cylinder_group include/linux/ufs_fs.h CG_MAGIC 0x00090255 ufs_cylinder_group include/linux/ufs_fs.h
A2232_MAGIC 0x000a2232 gs_port drivers/char/ser_a2232.h
RPORT_MAGIC 0x00525001 r_port drivers/char/rocket_int.h RPORT_MAGIC 0x00525001 r_port drivers/char/rocket_int.h
LSEMAGIC 0x05091998 lse drivers/fc4/fc.c LSEMAGIC 0x05091998 lse drivers/fc4/fc.c
GDTIOCTL_MAGIC 0x06030f07 gdth_iowr_str drivers/scsi/gdth_ioctl.h GDTIOCTL_MAGIC 0x06030f07 gdth_iowr_str drivers/scsi/gdth_ioctl.h
RIEBL_MAGIC 0x09051990 drivers/net/atarilance.c RIEBL_MAGIC 0x09051990 drivers/net/atarilance.c
RIO_MAGIC 0x12345678 gs_port drivers/char/rio/rio_linux.c
SX_MAGIC 0x12345678 gs_port drivers/char/sx.h
NBD_REQUEST_MAGIC 0x12560953 nbd_request include/linux/nbd.h NBD_REQUEST_MAGIC 0x12560953 nbd_request include/linux/nbd.h
RED_MAGIC2 0x170fc2a5 (any) mm/slab.c RED_MAGIC2 0x170fc2a5 (any) mm/slab.c
BAYCOM_MAGIC 0x19730510 baycom_state drivers/net/baycom_epp.c BAYCOM_MAGIC 0x19730510 baycom_state drivers/net/baycom_epp.c
...@@ -116,7 +110,6 @@ ISDN_ASYNC_MAGIC 0x49344C01 modem_info include/linux/isdn.h ...@@ -116,7 +110,6 @@ ISDN_ASYNC_MAGIC 0x49344C01 modem_info include/linux/isdn.h
CTC_ASYNC_MAGIC 0x49344C01 ctc_tty_info drivers/s390/net/ctctty.c CTC_ASYNC_MAGIC 0x49344C01 ctc_tty_info drivers/s390/net/ctctty.c
ISDN_NET_MAGIC 0x49344C02 isdn_net_local_s drivers/isdn/i4l/isdn_net_lib.h ISDN_NET_MAGIC 0x49344C02 isdn_net_local_s drivers/isdn/i4l/isdn_net_lib.h
SAVEKMSG_MAGIC2 0x4B4D5347 savekmsg arch/*/amiga/config.c SAVEKMSG_MAGIC2 0x4B4D5347 savekmsg arch/*/amiga/config.c
STLI_BOARDMAGIC 0x4bc6c825 stlibrd include/linux/istallion.h
CS_STATE_MAGIC 0x4c4f4749 cs_state sound/oss/cs46xx.c CS_STATE_MAGIC 0x4c4f4749 cs_state sound/oss/cs46xx.c
SLAB_C_MAGIC 0x4f17a36d kmem_cache mm/slab.c SLAB_C_MAGIC 0x4f17a36d kmem_cache mm/slab.c
COW_MAGIC 0x4f4f4f4d cow_header_v1 arch/um/drivers/ubd_user.c COW_MAGIC 0x4f4f4f4d cow_header_v1 arch/um/drivers/ubd_user.c
...@@ -127,10 +120,8 @@ SCC_MAGIC 0x52696368 gs_port drivers/char/scc.h ...@@ -127,10 +120,8 @@ SCC_MAGIC 0x52696368 gs_port drivers/char/scc.h
SAVEKMSG_MAGIC1 0x53415645 savekmsg arch/*/amiga/config.c SAVEKMSG_MAGIC1 0x53415645 savekmsg arch/*/amiga/config.c
GDA_MAGIC 0x58464552 gda arch/mips/include/asm/sn/gda.h GDA_MAGIC 0x58464552 gda arch/mips/include/asm/sn/gda.h
RED_MAGIC1 0x5a2cf071 (any) mm/slab.c RED_MAGIC1 0x5a2cf071 (any) mm/slab.c
STL_PORTMAGIC 0x5a7182c9 stlport include/linux/stallion.h
EEPROM_MAGIC_VALUE 0x5ab478d2 lanai_dev drivers/atm/lanai.c EEPROM_MAGIC_VALUE 0x5ab478d2 lanai_dev drivers/atm/lanai.c
HDLCDRV_MAGIC 0x5ac6e778 hdlcdrv_state include/linux/hdlcdrv.h HDLCDRV_MAGIC 0x5ac6e778 hdlcdrv_state include/linux/hdlcdrv.h
EPCA_MAGIC 0x5c6df104 channel include/linux/epca.h
PCXX_MAGIC 0x5c6df104 channel drivers/char/pcxx.h PCXX_MAGIC 0x5c6df104 channel drivers/char/pcxx.h
KV_MAGIC 0x5f4b565f kernel_vars_s arch/mips/include/asm/sn/klkernvars.h KV_MAGIC 0x5f4b565f kernel_vars_s arch/mips/include/asm/sn/klkernvars.h
I810_STATE_MAGIC 0x63657373 i810_state sound/oss/i810_audio.c I810_STATE_MAGIC 0x63657373 i810_state sound/oss/i810_audio.c
...@@ -142,17 +133,14 @@ SLOT_MAGIC 0x67267322 slot drivers/hotplug/acpiphp.h ...@@ -142,17 +133,14 @@ SLOT_MAGIC 0x67267322 slot drivers/hotplug/acpiphp.h
LO_MAGIC 0x68797548 nbd_device include/linux/nbd.h LO_MAGIC 0x68797548 nbd_device include/linux/nbd.h
OPROFILE_MAGIC 0x6f70726f super_block drivers/oprofile/oprofilefs.h OPROFILE_MAGIC 0x6f70726f super_block drivers/oprofile/oprofilefs.h
M3_STATE_MAGIC 0x734d724d m3_state sound/oss/maestro3.c M3_STATE_MAGIC 0x734d724d m3_state sound/oss/maestro3.c
STL_PANELMAGIC 0x7ef621a1 stlpanel include/linux/stallion.h
VMALLOC_MAGIC 0x87654320 snd_alloc_track sound/core/memory.c VMALLOC_MAGIC 0x87654320 snd_alloc_track sound/core/memory.c
KMALLOC_MAGIC 0x87654321 snd_alloc_track sound/core/memory.c KMALLOC_MAGIC 0x87654321 snd_alloc_track sound/core/memory.c
PWC_MAGIC 0x89DC10AB pwc_device drivers/usb/media/pwc.h PWC_MAGIC 0x89DC10AB pwc_device drivers/usb/media/pwc.h
NBD_REPLY_MAGIC 0x96744668 nbd_reply include/linux/nbd.h NBD_REPLY_MAGIC 0x96744668 nbd_reply include/linux/nbd.h
STL_BOARDMAGIC 0xa2267f52 stlbrd include/linux/stallion.h
ENI155_MAGIC 0xa54b872d midway_eprom drivers/atm/eni.h ENI155_MAGIC 0xa54b872d midway_eprom drivers/atm/eni.h
SCI_MAGIC 0xbabeface gs_port drivers/char/sh-sci.h SCI_MAGIC 0xbabeface gs_port drivers/char/sh-sci.h
CODA_MAGIC 0xC0DAC0DA coda_file_info fs/coda/coda_fs_i.h CODA_MAGIC 0xC0DAC0DA coda_file_info fs/coda/coda_fs_i.h
DPMEM_MAGIC 0xc0ffee11 gdt_pci_sram drivers/scsi/gdth.h DPMEM_MAGIC 0xc0ffee11 gdt_pci_sram drivers/scsi/gdth.h
STLI_PORTMAGIC 0xe671c7a1 stliport include/linux/istallion.h
YAM_MAGIC 0xF10A7654 yam_port drivers/net/hamradio/yam.c YAM_MAGIC 0xF10A7654 yam_port drivers/net/hamradio/yam.c
CCB_MAGIC 0xf2691ad2 ccb drivers/scsi/ncr53c8xx.c CCB_MAGIC 0xf2691ad2 ccb drivers/scsi/ncr53c8xx.c
QUEUE_MAGIC_FREE 0xf7e1c9a3 queue_entry drivers/scsi/arm/queue.c QUEUE_MAGIC_FREE 0xf7e1c9a3 queue_entry drivers/scsi/arm/queue.c
......
...@@ -2,23 +2,15 @@ ...@@ -2,23 +2,15 @@
- this file. - this file.
README.cycladesZ README.cycladesZ
- info on Cyclades-Z firmware loading. - info on Cyclades-Z firmware loading.
digiepca.txt
- info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
driver driver
- intro to the low level serial driver. - intro to the low level serial driver.
moxa-smartio moxa-smartio
- file with info on installing/using Moxa multiport serial driver. - file with info on installing/using Moxa multiport serial driver.
n_gsm.txt n_gsm.txt
- GSM 0710 tty multiplexer howto. - GSM 0710 tty multiplexer howto.
riscom8.txt
- notes on using the RISCom/8 multi-port serial driver.
rocket.txt rocket.txt
- info on the Comtrol RocketPort multiport serial driver. - info on the Comtrol RocketPort multiport serial driver.
serial-rs485.txt serial-rs485.txt
- info about RS485 structures and support in the kernel. - info about RS485 structures and support in the kernel.
specialix.txt
- info on hardware/driver for specialix IO8+ multiport serial card.
sx.txt
- info on the Specialix SX/SI multiport serial driver.
tty.txt tty.txt
- guide to the locking policies of the tty layer. - guide to the locking policies of the tty layer.
NOTE: This driver is obsolete. Digi provides a 2.6 driver (dgdm) at
http://www.digi.com for PCI cards. They no longer maintain this driver,
and have no 2.6 driver for ISA cards.
This driver requires a number of user-space tools. They can be acquired from
http://www.digi.com, but only works with 2.4 kernels.
The Digi Intl. epca driver.
----------------------------
The Digi Intl. epca driver for Linux supports the following boards:
Digi PC/Xem, PC/Xr, PC/Xe, PC/Xi, PC/Xeve
Digi EISA/Xem, PCI/Xem, PCI/Xr
Limitations:
------------
Currently the driver only autoprobes for supported PCI boards.
The Linux MAKEDEV command does not support generating the Digiboard
Devices. Users executing digiConfig to setup EISA and PC series cards
will have their device nodes automatically constructed (cud?? for ~CLOCAL,
and ttyD?? for CLOCAL). Users wishing to boot their board from the LILO
prompt, or those users booting PCI cards may use buildDIGI to construct
the necessary nodes.
Notes:
------
This driver may be configured via LILO. For users who have already configured
their driver using digiConfig, configuring from LILO will override previous
settings. Multiple boards may be configured by issuing multiple LILO command
lines. For examples see the bottom of this document.
Device names start at 0 and continue up. Beware of this as previous Digi
drivers started device names with 1.
PCI boards are auto-detected and configured by the driver. PCI boards will
be allocated device numbers (internally) beginning with the lowest PCI slot
first. In other words a PCI card in slot 3 will always have higher device
nodes than a PCI card in slot 1.
LILO config examples:
---------------------
Using LILO's APPEND command, a string of comma separated identifiers or
integers can be used to configure supported boards. The six values in order
are:
Enable/Disable this card or Override,
Type of card: PC/Xe (AccelePort) (0), PC/Xeve (1), PC/Xem or PC/Xr (2),
EISA/Xem (3), PC/64Xe (4), PC/Xi (5),
Enable/Disable alternate pin arrangement,
Number of ports on this card,
I/O Port where card is configured (in HEX if using string identifiers),
Base of memory window (in HEX if using string identifiers),
NOTE : PCI boards are auto-detected and configured. Do not attempt to
configure PCI boards with the LILO append command. If you wish to override
previous configuration data (As set by digiConfig), but you do not wish to
configure any specific card (Example if there are PCI cards in the system)
the following override command will accomplish this:
-> append="digi=2"
Samples:
append="digiepca=E,PC/Xe,D,16,200,D0000"
or
append="digi=1,0,0,16,512,851968"
Supporting Tools:
-----------------
Supporting tools include digiDload, digiConfig, buildPCI, and ditty. See
drivers/char/README.epca for more details. Note,
this driver REQUIRES that digiDload be executed prior to it being used.
Failure to do this will result in an ENODEV error.
Documentation:
--------------
Complete documentation for this product may be found in the tool package.
Sources of information and support:
-----------------------------------
Digi Intl. support site for this product:
-> http://www.digi.com
Acknowledgments:
----------------
Much of this work (And even text) was derived from a similar document
supporting the original public domain DigiBoard driver Copyright (C)
1994,1995 Troy De Jongh. Many thanks to Christoph Lameter
(christoph@lameter.com) and Mike McLagan (mike.mclagan@linux.org) who authored
and contributed to the original document.
Changelog:
----------
10-29-04: Update status of driver, remove dead links in document
James Nelson <james4765@gmail.com>
2000 (?) Original Document
* NOTE - this is an unmaintained driver. The original author cannot be located.
SDL Communications is now SBS Technologies, and does not have any
information on these ancient ISA cards on their website.
James Nelson <james4765@gmail.com> - 12-12-2004
This is the README for RISCom/8 multi-port serial driver
(C) 1994-1996 D.Gorodchanin
See file LICENSE for terms and conditions.
NOTE: English is not my native language.
I'm sorry for any mistakes in this text.
Misc. notes for RISCom/8 serial driver, in no particular order :)
1) This driver can support up to 4 boards at time.
Use string "riscom8=0xXXX,0xXXX,0xXXX,0xXXX" at LILO prompt, for
setting I/O base addresses for boards. If you compile driver
as module use modprobe options "iobase=0xXXX iobase1=0xXXX iobase2=..."
2) The driver partially supports famous 'setserial' program, you can use almost
any of its options, excluding port & irq settings.
3) There are some misc. defines at the beginning of riscom8.c, please read the
comments and try to change some of them in case of problems.
4) I consider the current state of the driver as BETA.
5) SDL Communications WWW page is http://www.sdlcomm.com.
6) You can use the MAKEDEV program to create RISCom/8 /dev/ttyL* entries.
7) Minor numbers for first board are 0-7, for second 8-15, etc.
22 Apr 1996.
This diff is collapsed.
This diff is collapsed.
...@@ -63,8 +63,6 @@ struct tty_ldisc { ...@@ -63,8 +63,6 @@ struct tty_ldisc {
PG_MAGIC 'P' pg_{read,write}_hdr include/linux/pg.h PG_MAGIC 'P' pg_{read,write}_hdr include/linux/pg.h
CMAGIC 0x0111 user include/linux/a.out.h CMAGIC 0x0111 user include/linux/a.out.h
MKISS_DRIVER_MAGIC 0x04bf mkiss_channel drivers/net/mkiss.h MKISS_DRIVER_MAGIC 0x04bf mkiss_channel drivers/net/mkiss.h
RISCOM8_MAGIC 0x0907 riscom_port drivers/char/riscom8.h
SPECIALIX_MAGIC 0x0907 specialix_port drivers/char/specialix_io8.h
HDLC_MAGIC 0x239e n_hdlc drivers/char/n_hdlc.c HDLC_MAGIC 0x239e n_hdlc drivers/char/n_hdlc.c
APM_BIOS_MAGIC 0x4101 apm_user arch/x86/kernel/apm_32.c APM_BIOS_MAGIC 0x4101 apm_user arch/x86/kernel/apm_32.c
CYCLADES_MAGIC 0x4359 cyclades_port include/linux/cyclades.h CYCLADES_MAGIC 0x4359 cyclades_port include/linux/cyclades.h
...@@ -82,7 +80,6 @@ STRIP_MAGIC 0x5303 strip drivers/net/strip.c ...@@ -82,7 +80,6 @@ STRIP_MAGIC 0x5303 strip drivers/net/strip.c
X25_ASY_MAGIC 0x5303 x25_asy drivers/net/x25_asy.h X25_ASY_MAGIC 0x5303 x25_asy drivers/net/x25_asy.h
SIXPACK_MAGIC 0x5304 sixpack drivers/net/hamradio/6pack.h SIXPACK_MAGIC 0x5304 sixpack drivers/net/hamradio/6pack.h
AX25_MAGIC 0x5316 ax_disp drivers/net/mkiss.h AX25_MAGIC 0x5316 ax_disp drivers/net/mkiss.h
ESP_MAGIC 0x53ee esp_struct drivers/char/esp.h
TTY_MAGIC 0x5401 tty_struct include/linux/tty.h TTY_MAGIC 0x5401 tty_struct include/linux/tty.h
MGSL_MAGIC 0x5401 mgsl_info drivers/char/synclink.c MGSL_MAGIC 0x5401 mgsl_info drivers/char/synclink.c
TTY_DRIVER_MAGIC 0x5402 tty_driver include/linux/tty_driver.h TTY_DRIVER_MAGIC 0x5402 tty_driver include/linux/tty_driver.h
...@@ -94,13 +91,10 @@ USB_BLUETOOTH_MAGIC 0x6d02 usb_bluetooth drivers/usb/class/bluetty.c ...@@ -94,13 +91,10 @@ USB_BLUETOOTH_MAGIC 0x6d02 usb_bluetooth drivers/usb/class/bluetty.c
RFCOMM_TTY_MAGIC 0x6d02 net/bluetooth/rfcomm/tty.c RFCOMM_TTY_MAGIC 0x6d02 net/bluetooth/rfcomm/tty.c
USB_SERIAL_PORT_MAGIC 0x7301 usb_serial_port drivers/usb/serial/usb-serial.h USB_SERIAL_PORT_MAGIC 0x7301 usb_serial_port drivers/usb/serial/usb-serial.h
CG_MAGIC 0x00090255 ufs_cylinder_group include/linux/ufs_fs.h CG_MAGIC 0x00090255 ufs_cylinder_group include/linux/ufs_fs.h
A2232_MAGIC 0x000a2232 gs_port drivers/char/ser_a2232.h
RPORT_MAGIC 0x00525001 r_port drivers/char/rocket_int.h RPORT_MAGIC 0x00525001 r_port drivers/char/rocket_int.h
LSEMAGIC 0x05091998 lse drivers/fc4/fc.c LSEMAGIC 0x05091998 lse drivers/fc4/fc.c
GDTIOCTL_MAGIC 0x06030f07 gdth_iowr_str drivers/scsi/gdth_ioctl.h GDTIOCTL_MAGIC 0x06030f07 gdth_iowr_str drivers/scsi/gdth_ioctl.h
RIEBL_MAGIC 0x09051990 drivers/net/atarilance.c RIEBL_MAGIC 0x09051990 drivers/net/atarilance.c
RIO_MAGIC 0x12345678 gs_port drivers/char/rio/rio_linux.c
SX_MAGIC 0x12345678 gs_port drivers/char/sx.h
NBD_REQUEST_MAGIC 0x12560953 nbd_request include/linux/nbd.h NBD_REQUEST_MAGIC 0x12560953 nbd_request include/linux/nbd.h
RED_MAGIC2 0x170fc2a5 (any) mm/slab.c RED_MAGIC2 0x170fc2a5 (any) mm/slab.c
BAYCOM_MAGIC 0x19730510 baycom_state drivers/net/baycom_epp.c BAYCOM_MAGIC 0x19730510 baycom_state drivers/net/baycom_epp.c
...@@ -116,7 +110,6 @@ ISDN_ASYNC_MAGIC 0x49344C01 modem_info include/linux/isdn.h ...@@ -116,7 +110,6 @@ ISDN_ASYNC_MAGIC 0x49344C01 modem_info include/linux/isdn.h
CTC_ASYNC_MAGIC 0x49344C01 ctc_tty_info drivers/s390/net/ctctty.c CTC_ASYNC_MAGIC 0x49344C01 ctc_tty_info drivers/s390/net/ctctty.c
ISDN_NET_MAGIC 0x49344C02 isdn_net_local_s drivers/isdn/i4l/isdn_net_lib.h ISDN_NET_MAGIC 0x49344C02 isdn_net_local_s drivers/isdn/i4l/isdn_net_lib.h
SAVEKMSG_MAGIC2 0x4B4D5347 savekmsg arch/*/amiga/config.c SAVEKMSG_MAGIC2 0x4B4D5347 savekmsg arch/*/amiga/config.c
STLI_BOARDMAGIC 0x4bc6c825 stlibrd include/linux/istallion.h
CS_STATE_MAGIC 0x4c4f4749 cs_state sound/oss/cs46xx.c CS_STATE_MAGIC 0x4c4f4749 cs_state sound/oss/cs46xx.c
SLAB_C_MAGIC 0x4f17a36d kmem_cache mm/slab.c SLAB_C_MAGIC 0x4f17a36d kmem_cache mm/slab.c
COW_MAGIC 0x4f4f4f4d cow_header_v1 arch/um/drivers/ubd_user.c COW_MAGIC 0x4f4f4f4d cow_header_v1 arch/um/drivers/ubd_user.c
...@@ -127,10 +120,8 @@ SCC_MAGIC 0x52696368 gs_port drivers/char/scc.h ...@@ -127,10 +120,8 @@ SCC_MAGIC 0x52696368 gs_port drivers/char/scc.h
SAVEKMSG_MAGIC1 0x53415645 savekmsg arch/*/amiga/config.c SAVEKMSG_MAGIC1 0x53415645 savekmsg arch/*/amiga/config.c
GDA_MAGIC 0x58464552 gda arch/mips/include/asm/sn/gda.h GDA_MAGIC 0x58464552 gda arch/mips/include/asm/sn/gda.h
RED_MAGIC1 0x5a2cf071 (any) mm/slab.c RED_MAGIC1 0x5a2cf071 (any) mm/slab.c
STL_PORTMAGIC 0x5a7182c9 stlport include/linux/stallion.h
EEPROM_MAGIC_VALUE 0x5ab478d2 lanai_dev drivers/atm/lanai.c EEPROM_MAGIC_VALUE 0x5ab478d2 lanai_dev drivers/atm/lanai.c
HDLCDRV_MAGIC 0x5ac6e778 hdlcdrv_state include/linux/hdlcdrv.h HDLCDRV_MAGIC 0x5ac6e778 hdlcdrv_state include/linux/hdlcdrv.h
EPCA_MAGIC 0x5c6df104 channel include/linux/epca.h
PCXX_MAGIC 0x5c6df104 channel drivers/char/pcxx.h PCXX_MAGIC 0x5c6df104 channel drivers/char/pcxx.h
KV_MAGIC 0x5f4b565f kernel_vars_s arch/mips/include/asm/sn/klkernvars.h KV_MAGIC 0x5f4b565f kernel_vars_s arch/mips/include/asm/sn/klkernvars.h
I810_STATE_MAGIC 0x63657373 i810_state sound/oss/i810_audio.c I810_STATE_MAGIC 0x63657373 i810_state sound/oss/i810_audio.c
...@@ -142,17 +133,14 @@ SLOT_MAGIC 0x67267322 slot drivers/hotplug/acpiphp.h ...@@ -142,17 +133,14 @@ SLOT_MAGIC 0x67267322 slot drivers/hotplug/acpiphp.h
LO_MAGIC 0x68797548 nbd_device include/linux/nbd.h LO_MAGIC 0x68797548 nbd_device include/linux/nbd.h
OPROFILE_MAGIC 0x6f70726f super_block drivers/oprofile/oprofilefs.h OPROFILE_MAGIC 0x6f70726f super_block drivers/oprofile/oprofilefs.h
M3_STATE_MAGIC 0x734d724d m3_state sound/oss/maestro3.c M3_STATE_MAGIC 0x734d724d m3_state sound/oss/maestro3.c
STL_PANELMAGIC 0x7ef621a1 stlpanel include/linux/stallion.h
VMALLOC_MAGIC 0x87654320 snd_alloc_track sound/core/memory.c VMALLOC_MAGIC 0x87654320 snd_alloc_track sound/core/memory.c
KMALLOC_MAGIC 0x87654321 snd_alloc_track sound/core/memory.c KMALLOC_MAGIC 0x87654321 snd_alloc_track sound/core/memory.c
PWC_MAGIC 0x89DC10AB pwc_device drivers/usb/media/pwc.h PWC_MAGIC 0x89DC10AB pwc_device drivers/usb/media/pwc.h
NBD_REPLY_MAGIC 0x96744668 nbd_reply include/linux/nbd.h NBD_REPLY_MAGIC 0x96744668 nbd_reply include/linux/nbd.h
STL_BOARDMAGIC 0xa2267f52 stlbrd include/linux/stallion.h
ENI155_MAGIC 0xa54b872d midway_eprom drivers/atm/eni.h ENI155_MAGIC 0xa54b872d midway_eprom drivers/atm/eni.h
SCI_MAGIC 0xbabeface gs_port drivers/char/sh-sci.h SCI_MAGIC 0xbabeface gs_port drivers/char/sh-sci.h
CODA_MAGIC 0xC0DAC0DA coda_file_info include/linux/coda_fs_i.h CODA_MAGIC 0xC0DAC0DA coda_file_info include/linux/coda_fs_i.h
DPMEM_MAGIC 0xc0ffee11 gdt_pci_sram drivers/scsi/gdth.h DPMEM_MAGIC 0xc0ffee11 gdt_pci_sram drivers/scsi/gdth.h
STLI_PORTMAGIC 0xe671c7a1 stliport include/linux/istallion.h
YAM_MAGIC 0xF10A7654 yam_port drivers/net/hamradio/yam.c YAM_MAGIC 0xF10A7654 yam_port drivers/net/hamradio/yam.c
CCB_MAGIC 0xf2691ad2 ccb drivers/scsi/ncr53c8xx.c CCB_MAGIC 0xf2691ad2 ccb drivers/scsi/ncr53c8xx.c
QUEUE_MAGIC_FREE 0xf7e1c9a3 queue_entry drivers/scsi/arm/queue.c QUEUE_MAGIC_FREE 0xf7e1c9a3 queue_entry drivers/scsi/arm/queue.c
......
...@@ -40,7 +40,7 @@ config SGI_MBCS ...@@ -40,7 +40,7 @@ config SGI_MBCS
source "drivers/tty/serial/Kconfig" source "drivers/tty/serial/Kconfig"
config TTY_PRINTK config TTY_PRINTK
bool "TTY driver to output user messages via printk" tristate "TTY driver to output user messages via printk"
depends on EXPERT && TTY depends on EXPERT && TTY
default n default n
---help--- ---help---
......
...@@ -15,7 +15,7 @@ config SYNCLINK_CS ...@@ -15,7 +15,7 @@ config SYNCLINK_CS
This driver may be built as a module ( = code which can be This driver may be built as a module ( = code which can be
inserted in and removed from the running kernel whenever you want). inserted in and removed from the running kernel whenever you want).
The module will be called synclinkmp. If you want to do that, say M The module will be called synclink_cs. If you want to do that, say M
here. here.
config CARDMAN_4000 config CARDMAN_4000
......
...@@ -17,7 +17,7 @@ ...@@ -17,7 +17,7 @@
#include <linux/device.h> #include <linux/device.h>
#include <linux/serial.h> #include <linux/serial.h>
#include <linux/tty.h> #include <linux/tty.h>
#include <linux/export.h> #include <linux/module.h>
struct ttyprintk_port { struct ttyprintk_port {
struct tty_port port; struct tty_port port;
...@@ -210,10 +210,19 @@ static int __init ttyprintk_init(void) ...@@ -210,10 +210,19 @@ static int __init ttyprintk_init(void)
return 0; return 0;
error: error:
tty_unregister_driver(ttyprintk_driver);
put_tty_driver(ttyprintk_driver); put_tty_driver(ttyprintk_driver);
tty_port_destroy(&tpk_port.port); tty_port_destroy(&tpk_port.port);
ttyprintk_driver = NULL;
return ret; return ret;
} }
static void __exit ttyprintk_exit(void)
{
tty_unregister_driver(ttyprintk_driver);
put_tty_driver(ttyprintk_driver);
tty_port_destroy(&tpk_port.port);
}
device_initcall(ttyprintk_init); device_initcall(ttyprintk_init);
module_exit(ttyprintk_exit);
MODULE_LICENSE("GPL");
...@@ -1226,6 +1226,7 @@ config SERIAL_BFIN_SPORT3_UART_CTSRTS ...@@ -1226,6 +1226,7 @@ config SERIAL_BFIN_SPORT3_UART_CTSRTS
config SERIAL_TIMBERDALE config SERIAL_TIMBERDALE
tristate "Support for timberdale UART" tristate "Support for timberdale UART"
select SERIAL_CORE select SERIAL_CORE
depends on X86_32 || COMPILE_TEST
---help--- ---help---
Add support for UART controller on timberdale. Add support for UART controller on timberdale.
......
...@@ -318,7 +318,7 @@ static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port * ...@@ -318,7 +318,7 @@ static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port *
.src_addr = uap->port.mapbase + UART01x_DR, .src_addr = uap->port.mapbase + UART01x_DR,
.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
.direction = DMA_DEV_TO_MEM, .direction = DMA_DEV_TO_MEM,
.src_maxburst = uap->fifosize >> 1, .src_maxburst = uap->fifosize >> 2,
.device_fc = false, .device_fc = false,
}; };
...@@ -2176,6 +2176,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) ...@@ -2176,6 +2176,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
static int pl011_remove(struct amba_device *dev) static int pl011_remove(struct amba_device *dev)
{ {
struct uart_amba_port *uap = amba_get_drvdata(dev); struct uart_amba_port *uap = amba_get_drvdata(dev);
bool busy = false;
int i; int i;
uart_remove_one_port(&amba_reg, &uap->port); uart_remove_one_port(&amba_reg, &uap->port);
...@@ -2183,8 +2184,11 @@ static int pl011_remove(struct amba_device *dev) ...@@ -2183,8 +2184,11 @@ static int pl011_remove(struct amba_device *dev)
for (i = 0; i < ARRAY_SIZE(amba_ports); i++) for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
if (amba_ports[i] == uap) if (amba_ports[i] == uap)
amba_ports[i] = NULL; amba_ports[i] = NULL;
else if (amba_ports[i])
busy = true;
pl011_dma_remove(uap); pl011_dma_remove(uap);
if (!busy)
uart_unregister_driver(&amba_reg); uart_unregister_driver(&amba_reg);
return 0; return 0;
} }
......
...@@ -368,16 +368,12 @@ static const struct uart_ops uart_clps711x_ops = { ...@@ -368,16 +368,12 @@ static const struct uart_ops uart_clps711x_ops = {
static void uart_clps711x_console_putchar(struct uart_port *port, int ch) static void uart_clps711x_console_putchar(struct uart_port *port, int ch)
{ {
struct clps711x_port *s = dev_get_drvdata(port->dev); struct clps711x_port *s = dev_get_drvdata(port->dev);
/* Wait for FIFO is not full */
while (1) {
u32 sysflg = 0; u32 sysflg = 0;
/* Wait for FIFO is not full */
do {
regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
if (!(sysflg & SYSFLG_UTXFF)) } while (sysflg & SYSFLG_UTXFF);
break;
cond_resched();
}
writew(ch, port->membase + UARTDR_OFFSET); writew(ch, port->membase + UARTDR_OFFSET);
} }
...@@ -387,18 +383,14 @@ static void uart_clps711x_console_write(struct console *co, const char *c, ...@@ -387,18 +383,14 @@ static void uart_clps711x_console_write(struct console *co, const char *c,
{ {
struct uart_port *port = clps711x_uart.state[co->index].uart_port; struct uart_port *port = clps711x_uart.state[co->index].uart_port;
struct clps711x_port *s = dev_get_drvdata(port->dev); struct clps711x_port *s = dev_get_drvdata(port->dev);
u32 sysflg = 0;
uart_console_write(port, c, n, uart_clps711x_console_putchar); uart_console_write(port, c, n, uart_clps711x_console_putchar);
/* Wait for transmitter to become empty */ /* Wait for transmitter to become empty */
while (1) { do {
u32 sysflg = 0;
regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
if (!(sysflg & SYSFLG_UBUSY)) } while (sysflg & SYSFLG_UBUSY);
break;
cond_resched();
}
} }
static int uart_clps711x_console_setup(struct console *co, char *options) static int uart_clps711x_console_setup(struct console *co, char *options)
......
...@@ -798,6 +798,9 @@ static int efm32_uart_remove(struct platform_device *pdev) ...@@ -798,6 +798,9 @@ static int efm32_uart_remove(struct platform_device *pdev)
static const struct of_device_id efm32_uart_dt_ids[] = { static const struct of_device_id efm32_uart_dt_ids[] = {
{ {
.compatible = "energymicro,efm32-uart",
}, {
/* doesn't follow the "vendor,device" scheme, don't use */
.compatible = "efm32,uart", .compatible = "efm32,uart",
}, { }, {
/* sentinel */ /* sentinel */
......
...@@ -225,14 +225,19 @@ static inline void serial_omap_enable_wakeirq(struct uart_omap_port *up, ...@@ -225,14 +225,19 @@ static inline void serial_omap_enable_wakeirq(struct uart_omap_port *up,
if (enable) if (enable)
enable_irq(up->wakeirq); enable_irq(up->wakeirq);
else else
disable_irq(up->wakeirq); disable_irq_nosync(up->wakeirq);
} }
static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable) static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable)
{ {
struct omap_uart_port_info *pdata = dev_get_platdata(up->dev); struct omap_uart_port_info *pdata = dev_get_platdata(up->dev);
if (enable == up->wakeups_enabled)
return;
serial_omap_enable_wakeirq(up, enable); serial_omap_enable_wakeirq(up, enable);
up->wakeups_enabled = enable;
if (!pdata || !pdata->enable_wakeup) if (!pdata || !pdata->enable_wakeup)
return; return;
...@@ -1495,6 +1500,11 @@ static int serial_omap_suspend(struct device *dev) ...@@ -1495,6 +1500,11 @@ static int serial_omap_suspend(struct device *dev)
uart_suspend_port(&serial_omap_reg, &up->port); uart_suspend_port(&serial_omap_reg, &up->port);
flush_work(&up->qos_work); flush_work(&up->qos_work);
if (device_may_wakeup(dev))
serial_omap_enable_wakeup(up, true);
else
serial_omap_enable_wakeup(up, false);
return 0; return 0;
} }
...@@ -1502,6 +1512,9 @@ static int serial_omap_resume(struct device *dev) ...@@ -1502,6 +1512,9 @@ static int serial_omap_resume(struct device *dev)
{ {
struct uart_omap_port *up = dev_get_drvdata(dev); struct uart_omap_port *up = dev_get_drvdata(dev);
if (device_may_wakeup(dev))
serial_omap_enable_wakeup(up, false);
uart_resume_port(&serial_omap_reg, &up->port); uart_resume_port(&serial_omap_reg, &up->port);
return 0; return 0;
...@@ -1789,6 +1802,7 @@ static int serial_omap_remove(struct platform_device *dev) ...@@ -1789,6 +1802,7 @@ static int serial_omap_remove(struct platform_device *dev)
pm_runtime_disable(up->dev); pm_runtime_disable(up->dev);
uart_remove_one_port(&serial_omap_reg, &up->port); uart_remove_one_port(&serial_omap_reg, &up->port);
pm_qos_remove_request(&up->pm_qos_request); pm_qos_remove_request(&up->pm_qos_request);
device_init_wakeup(&dev->dev, false);
return 0; return 0;
} }
...@@ -1877,17 +1891,7 @@ static int serial_omap_runtime_suspend(struct device *dev) ...@@ -1877,17 +1891,7 @@ static int serial_omap_runtime_suspend(struct device *dev)
up->context_loss_cnt = serial_omap_get_context_loss_count(up); up->context_loss_cnt = serial_omap_get_context_loss_count(up);
if (device_may_wakeup(dev)) {
if (!up->wakeups_enabled) {
serial_omap_enable_wakeup(up, true); serial_omap_enable_wakeup(up, true);
up->wakeups_enabled = true;
}
} else {
if (up->wakeups_enabled) {
serial_omap_enable_wakeup(up, false);
up->wakeups_enabled = false;
}
}
up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE; up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
schedule_work(&up->qos_work); schedule_work(&up->qos_work);
...@@ -1901,6 +1905,8 @@ static int serial_omap_runtime_resume(struct device *dev) ...@@ -1901,6 +1905,8 @@ static int serial_omap_runtime_resume(struct device *dev)
int loss_cnt = serial_omap_get_context_loss_count(up); int loss_cnt = serial_omap_get_context_loss_count(up);
serial_omap_enable_wakeup(up, false);
if (loss_cnt < 0) { if (loss_cnt < 0) {
dev_dbg(dev, "serial_omap_get_context_loss_count failed : %d\n", dev_dbg(dev, "serial_omap_get_context_loss_count failed : %d\n",
loss_cnt); loss_cnt);
......
...@@ -89,8 +89,7 @@ static void __uart_start(struct tty_struct *tty) ...@@ -89,8 +89,7 @@ static void __uart_start(struct tty_struct *tty)
struct uart_state *state = tty->driver_data; struct uart_state *state = tty->driver_data;
struct uart_port *port = state->uart_port; struct uart_port *port = state->uart_port;
if (!uart_circ_empty(&state->xmit) && state->xmit.buf && if (!tty->stopped && !tty->hw_stopped)
!tty->stopped && !tty->hw_stopped)
port->ops->start_tx(port); port->ops->start_tx(port);
} }
...@@ -1452,6 +1451,8 @@ static void uart_hangup(struct tty_struct *tty) ...@@ -1452,6 +1451,8 @@ static void uart_hangup(struct tty_struct *tty)
clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
spin_unlock_irqrestore(&port->lock, flags); spin_unlock_irqrestore(&port->lock, flags);
tty_port_tty_set(port, NULL); tty_port_tty_set(port, NULL);
if (!uart_console(state->uart_port))
uart_change_pm(state, UART_PM_STATE_OFF);
wake_up_interruptible(&port->open_wait); wake_up_interruptible(&port->open_wait);
wake_up_interruptible(&port->delta_msr_wait); wake_up_interruptible(&port->delta_msr_wait);
} }
......
...@@ -295,7 +295,7 @@ static void asc_receive_chars(struct uart_port *port) ...@@ -295,7 +295,7 @@ static void asc_receive_chars(struct uart_port *port)
status & ASC_STA_OE) { status & ASC_STA_OE) {
if (c & ASC_RXBUF_FE) { if (c & ASC_RXBUF_FE) {
if (c == ASC_RXBUF_FE) { if (c == (ASC_RXBUF_FE | ASC_RXBUF_DUMMY_RX)) {
port->icount.brk++; port->icount.brk++;
if (uart_handle_break(port)) if (uart_handle_break(port))
continue; continue;
...@@ -325,7 +325,7 @@ static void asc_receive_chars(struct uart_port *port) ...@@ -325,7 +325,7 @@ static void asc_receive_chars(struct uart_port *port)
flag = TTY_FRAME; flag = TTY_FRAME;
} }
if (uart_handle_sysrq_char(port, c)) if (uart_handle_sysrq_char(port, c & 0xff))
continue; continue;
uart_insert_char(port, c, ASC_RXBUF_DUMMY_OE, c & 0xff, flag); uart_insert_char(port, c, ASC_RXBUF_DUMMY_OE, c & 0xff, flag);
......
...@@ -878,9 +878,8 @@ void disassociate_ctty(int on_exit) ...@@ -878,9 +878,8 @@ void disassociate_ctty(int on_exit)
spin_lock_irq(&current->sighand->siglock); spin_lock_irq(&current->sighand->siglock);
put_pid(current->signal->tty_old_pgrp); put_pid(current->signal->tty_old_pgrp);
current->signal->tty_old_pgrp = NULL; current->signal->tty_old_pgrp = NULL;
spin_unlock_irq(&current->sighand->siglock);
tty = get_current_tty(); tty = tty_kref_get(current->signal->tty);
if (tty) { if (tty) {
unsigned long flags; unsigned long flags;
spin_lock_irqsave(&tty->ctrl_lock, flags); spin_lock_irqsave(&tty->ctrl_lock, flags);
...@@ -897,6 +896,7 @@ void disassociate_ctty(int on_exit) ...@@ -897,6 +896,7 @@ void disassociate_ctty(int on_exit)
#endif #endif
} }
spin_unlock_irq(&current->sighand->siglock);
/* Now clear signal->tty under the lock */ /* Now clear signal->tty under the lock */
read_lock(&tasklist_lock); read_lock(&tasklist_lock);
session_clear_tty(task_session(current)); session_clear_tty(task_session(current));
......
...@@ -273,16 +273,6 @@ Converted from Intel HEX files, used in our binary representation of ihex. ...@@ -273,16 +273,6 @@ Converted from Intel HEX files, used in our binary representation of ihex.
-------------------------------------------------------------------------- --------------------------------------------------------------------------
Driver: ip2 -- Computone IntelliPort Plus serial device
File: intelliport2.bin
Licence: Unknown
Found in hex form in kernel source.
--------------------------------------------------------------------------
Driver: CPiA2 -- cameras based on Vision's CPiA2 Driver: CPiA2 -- cameras based on Vision's CPiA2
File: cpia2/stv0672_vp4.bin File: cpia2/stv0672_vp4.bin
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment