Merge tag 'for-linus-4.9-2' of git://git.code.sf.net/p/openipmi/linux-ipmi

Pull IPMI updates from Corey Minyard:
 "A small bug fix and a new driver for acting as an IPMI device.

  I was on vacation during the merge window (a long vacation) but this
  is a bug fix that should go in and a new driver that shouldn't hurt
  anything.

  This has been in linux-next for a month or so"

* tag 'for-linus-4.9-2' of git://git.code.sf.net/p/openipmi/linux-ipmi:
  ipmi: fix crash on reading version from proc after unregisted bmc
  ipmi/bt-bmc: remove redundant return value check of platform_get_resource()
  ipmi/bt-bmc: add a dependency on ARCH_ASPEED
  ipmi: Fix ioremap error handling in bt-bmc
  ipmi: add an Aspeed BT IPMI BMC driver

Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt

+* Aspeed BT (Block Transfer) IPMI interface
+
+The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs
+(BaseBoard Management Controllers) and the BT interface can be used to
+perform in-band IPMI communication with their host.
+
+Required properties:
+
+- compatible : should be "aspeed,ast2400-bt-bmc"
+- reg: physical address and size of the registers
+
+Optional properties:
+
+- interrupts: interrupt generated by the BT interface. without an
+  interrupt, the driver will operate in poll mode.
+
+Example:
+
+	ibt@1e789140 {
+		compatible = "aspeed,ast2400-bt-bmc";
+		reg = <0x1e789140 0x18>;
+		interrupts = <8>;
+	};

drivers/Makefile

@@ -21,7 +21,7 @@ obj-y				+= video/
 obj-y				+= idle/
 
 # IPMI must come before ACPI in order to provide IPMI opregion support
-obj-$(CONFIG_IPMI_HANDLER)	+= char/ipmi/
+obj-y				+= char/ipmi/
 
 obj-$(CONFIG_ACPI)		+= acpi/
 obj-$(CONFIG_SFI)		+= sfi/

drivers/char/ipmi/Kconfig

@@ -76,3 +76,11 @@ config IPMI_POWEROFF
 	 the IPMI management controller is capable of this.
 
 endif # IPMI_HANDLER
+
+config ASPEED_BT_IPMI_BMC
+	depends on ARCH_ASPEED
+	tristate "BT IPMI bmc driver"
+	help
+	  Provides a driver for the BT (Block Transfer) IPMI interface
+	  found on Aspeed SOCs (AST2400 and AST2500). The driver
+	  implements the BMC side of the BT interface.

drivers/char/ipmi/Makefile

@@ -11,3 +11,4 @@ obj-$(CONFIG_IPMI_SSIF) += ipmi_ssif.o
 obj-$(CONFIG_IPMI_POWERNV) += ipmi_powernv.o
 obj-$(CONFIG_IPMI_WATCHDOG) += ipmi_watchdog.o
 obj-$(CONFIG_IPMI_POWEROFF) += ipmi_poweroff.o
+obj-$(CONFIG_ASPEED_BT_IPMI_BMC) += bt-bmc.o

drivers/char/ipmi/ipmi_msghandler.c

@@ -2891,11 +2891,11 @@ int ipmi_register_smi(const struct ipmi_smi_handlers *handlers,
 		intf->curr_channel = IPMI_MAX_CHANNELS;
 	}
 
+	rv = ipmi_bmc_register(intf, i);
+
 	if (rv == 0)
 		rv = add_proc_entries(intf, i);
 
-	rv = ipmi_bmc_register(intf, i);
-
  out:
 	if (rv) {
 		if (intf->proc_dir)
@@ -2982,8 +2982,6 @@ int ipmi_unregister_smi(ipmi_smi_t intf)
 	int intf_num = intf->intf_num;
 	ipmi_user_t user;
 
-	ipmi_bmc_unregister(intf);
-
 	mutex_lock(&smi_watchers_mutex);
 	mutex_lock(&ipmi_interfaces_mutex);
 	intf->intf_num = -1;
@@ -3007,6 +3005,7 @@ int ipmi_unregister_smi(ipmi_smi_t intf)
 	mutex_unlock(&ipmi_interfaces_mutex);
 
 	remove_proc_entries(intf);
+	ipmi_bmc_unregister(intf);
 
 	/*
 	 * Call all the watcher interfaces to tell them that

include/uapi/linux/Kbuild

@@ -75,6 +75,7 @@ header-y += bpf_perf_event.h
 header-y += bpf.h
 header-y += bpqether.h
 header-y += bsg.h
+header-y += bt-bmc.h
 header-y += btrfs.h
 header-y += can.h
 header-y += capability.h

include/uapi/linux/bt-bmc.h

+/*
+ * Copyright (c) 2015-2016, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _UAPI_LINUX_BT_BMC_H
+#define _UAPI_LINUX_BT_BMC_H
+
+#include <linux/ioctl.h>
+
+#define __BT_BMC_IOCTL_MAGIC	0xb1
+#define BT_BMC_IOCTL_SMS_ATN	_IO(__BT_BMC_IOCTL_MAGIC, 0x00)
+
+#endif /* _UAPI_LINUX_BT_BMC_H */