Commit 5772e9a3 authored by Jesper Dangaard Brouer's avatar Jesper Dangaard Brouer Committed by David S. Miller

qdisc: bulk dequeue support for qdiscs with TCQ_F_ONETXQUEUE

Based on DaveM's recent API work on dev_hard_start_xmit(), that allows
sending/processing an entire skb list.

This patch implements qdisc bulk dequeue, by allowing multiple packets
to be dequeued in dequeue_skb().

The optimization principle for this is two fold, (1) to amortize
locking cost and (2) avoid expensive tailptr update for notifying HW.
 (1) Several packets are dequeued while holding the qdisc root_lock,
amortizing locking cost over several packet.  The dequeued SKB list is
processed under the TXQ lock in dev_hard_start_xmit(), thus also
amortizing the cost of the TXQ lock.
 (2) Further more, dev_hard_start_xmit() will utilize the skb->xmit_more
API to delay HW tailptr update, which also reduces the cost per
packet.

One restriction of the new API is that every SKB must belong to the
same TXQ.  This patch takes the easy way out, by restricting bulk
dequeue to qdisc's with the TCQ_F_ONETXQUEUE flag, that specifies the
qdisc only have attached a single TXQ.

Some detail about the flow; dev_hard_start_xmit() will process the skb
list, and transmit packets individually towards the driver (see
xmit_one()).  In case the driver stops midway in the list, the
remaining skb list is returned by dev_hard_start_xmit().  In
sch_direct_xmit() this returned list is requeued by dev_requeue_skb().

To avoid overshooting the HW limits, which results in requeuing, the
patch limits the amount of bytes dequeued, based on the drivers BQL
limits.  In-effect bulking will only happen for BQL enabled drivers.

Small amounts for extra HoL blocking (2x MTU/0.24ms) were
measured at 100Mbit/s, with bulking 8 packets, but the
oscillating nature of the measurement indicate something, like
sched latency might be causing this effect. More comparisons
show, that this oscillation goes away occationally. Thus, we
disregard this artifact completely and remove any "magic" bulking
limit.

For now, as a conservative approach, stop bulking when seeing TSO and
segmented GSO packets.  They already benefit from bulking on their own.
A followup patch add this, to allow easier bisect-ability for finding
regressions.

Jointed work with Hannes, Daniel and Florian.
Signed-off-by: default avatarJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: default avatarDaniel Borkmann <dborkman@redhat.com>
Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 38df6492
......@@ -7,6 +7,7 @@
#include <linux/pkt_sched.h>
#include <linux/pkt_cls.h>
#include <linux/percpu.h>
#include <linux/dynamic_queue_limits.h>
#include <net/gen_stats.h>
#include <net/rtnetlink.h>
......@@ -119,6 +120,21 @@ static inline void qdisc_run_end(struct Qdisc *qdisc)
qdisc->__state &= ~__QDISC___STATE_RUNNING;
}
static inline bool qdisc_may_bulk(const struct Qdisc *qdisc)
{
return qdisc->flags & TCQ_F_ONETXQUEUE;
}
static inline int qdisc_avail_bulklimit(const struct netdev_queue *txq)
{
#ifdef CONFIG_BQL
/* Non-BQL migrated drivers will return 0, too. */
return dql_avail(&txq->dql);
#else
return 0;
#endif
}
static inline bool qdisc_is_throttled(const struct Qdisc *qdisc)
{
return test_bit(__QDISC_STATE_THROTTLED, &qdisc->state) ? true : false;
......
......@@ -56,6 +56,41 @@ static inline int dev_requeue_skb(struct sk_buff *skb, struct Qdisc *q)
return 0;
}
static struct sk_buff *try_bulk_dequeue_skb(struct Qdisc *q,
struct sk_buff *head_skb,
int bytelimit)
{
struct sk_buff *skb, *tail_skb = head_skb;
while (bytelimit > 0) {
/* For now, don't bulk dequeue GSO (or GSO segmented) pkts */
if (tail_skb->next || skb_is_gso(tail_skb))
break;
skb = q->dequeue(q);
if (!skb)
break;
bytelimit -= skb->len; /* covers GSO len */
skb = validate_xmit_skb(skb, qdisc_dev(q));
if (!skb)
break;
/* "skb" can be a skb list after validate call above
* (GSO segmented), but it is okay to append it to
* current tail_skb->next, because next round will exit
* in-case "tail_skb->next" is a skb list.
*/
tail_skb->next = skb;
tail_skb = skb;
}
return head_skb;
}
/* Note that dequeue_skb can possibly return a SKB list (via skb->next).
* A requeued skb (via q->gso_skb) can also be a SKB list.
*/
static inline struct sk_buff *dequeue_skb(struct Qdisc *q)
{
struct sk_buff *skb = q->gso_skb;
......@@ -70,10 +105,17 @@ static inline struct sk_buff *dequeue_skb(struct Qdisc *q)
} else
skb = NULL;
} else {
if (!(q->flags & TCQ_F_ONETXQUEUE) || !netif_xmit_frozen_or_stopped(txq)) {
if (!(q->flags & TCQ_F_ONETXQUEUE) ||
!netif_xmit_frozen_or_stopped(txq)) {
int bytelimit = qdisc_avail_bulklimit(txq);
skb = q->dequeue(q);
if (skb)
if (skb) {
bytelimit -= skb->len;
skb = validate_xmit_skb(skb, qdisc_dev(q));
}
if (skb && qdisc_may_bulk(q))
skb = try_bulk_dequeue_skb(q, skb, bytelimit);
}
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment