Skip to content

L
linux
Commit 57899053 authored by Stephen Warren's avatar Stephen Warren
Browse files
Options

ARM: tegra: fix node sort order 

For Tegra DT files, I've been attempting to keep the nodes sorted in
the order:
1) Nodes with reg, in order of reg.
2) Nodes without reg, alphabetically.

This patch fixes a few escapees that I missed:-(

The diffs look larger than they really are, because sometimes when one
node was moved up or down, diff chose to represent this as many other
nodes being moved the other way!
Signed-off-by: default avatarStephen Warren <swarren@nvidia.com>
parent 58ecb23f
Hide whitespace changes
Inline Side-by-side
Showing with 333 additions and 332 deletions
arch/arm/boot/dts/tegra20-colibri-512.dtsi
View file @ 57899053
......@@ -199,6 +199,14 @@ vi_sc {
};
};
ac97: ac97@70002000 {
status = "okay";
nvidia,codec-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
GPIO_ACTIVE_HIGH>;
nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0)
GPIO_ACTIVE_HIGH>;
};
i2c@7000c000 {
clock-frequency = <400000>;
};
......@@ -442,14 +450,6 @@ emc-table@333000 {
};
};
ac97: ac97@70002000 {
status = "okay";
nvidia,codec-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
GPIO_ACTIVE_HIGH>;
nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0)
GPIO_ACTIVE_HIGH>;
};
usb@c5004000 {
status = "okay";
nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
......@@ -479,26 +479,6 @@ clk32k_in: clock@0 {
};
};
sound {
compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
"nvidia,tegra-audio-wm9712";
nvidia,model = "Colibri T20 AC97 Audio";
nvidia,audio-routing =
"Headphone", "HPOUTL",
"Headphone", "HPOUTR",
"LineIn", "LINEINL",
"LineIn", "LINEINR",
"Mic", "MIC1";
nvidia,ac97-controller = <&ac97>;
clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
<&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
<&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
......@@ -525,4 +505,24 @@ regulator@101 {
gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
};
};
sound {
compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
"nvidia,tegra-audio-wm9712";
nvidia,model = "Colibri T20 AC97 Audio";
nvidia,audio-routing =
"Headphone", "HPOUTL",
"Headphone", "HPOUTR",
"LineIn", "LINEINL",
"LineIn", "LINEINR",
"Mic", "MIC1";
nvidia,ac97-controller = <&ac97>;
clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
<&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
<&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
arch/arm/boot/dts/tegra20-harmony.dts
View file @ 57899053
......@@ -415,98 +415,6 @@ temperature-sensor@4c {
};
};
pmc@7000e400 {
nvidia,invert-interrupt;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <5000>;
nvidia,cpu-pwr-off-time = <5000>;
nvidia,core-pwr-good-time = <3845 3845>;
nvidia,core-pwr-off-time = <3875>;
nvidia,sys-clock-req-active-high;
};
pcie-controller@80003000 {
pex-clk-supply = <&pci_clk_reg>;
vdd-supply = <&pci_vdd_reg>;
status = "okay";
pci@1,0 {
status = "okay";
};
pci@2,0 {
status = "okay";
};
};
usb@c5000000 {
status = "okay";
};
usb-phy@c5000000 {
status = "okay";
};
usb@c5004000 {
status = "okay";
nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
GPIO_ACTIVE_LOW>;
};
usb-phy@c5004000 {
status = "okay";
nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
GPIO_ACTIVE_LOW>;
};
usb@c5008000 {
status = "okay";
};
usb-phy@c5008000 {
status = "okay";
};
sdhci@c8000200 {
status = "okay";
cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
power-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
sdhci@c8000600 {
status = "okay";
cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
bus-width = <8>;
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock@0 {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
gpio-keys {
compatible = "gpio-keys";
power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
};
kbc@7000e200 {
status = "okay";
nvidia,debounce-delay-ms = <2>;
......@@ -624,6 +532,98 @@ kbc@7000e200 {
0x1F0400D6>; /* KEY_QUESTION */
};
pmc@7000e400 {
nvidia,invert-interrupt;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <5000>;
nvidia,cpu-pwr-off-time = <5000>;
nvidia,core-pwr-good-time = <3845 3845>;
nvidia,core-pwr-off-time = <3875>;
nvidia,sys-clock-req-active-high;
};
pcie-controller@80003000 {
pex-clk-supply = <&pci_clk_reg>;
vdd-supply = <&pci_vdd_reg>;
status = "okay";
pci@1,0 {
status = "okay";
};
pci@2,0 {
status = "okay";
};
};
usb@c5000000 {
status = "okay";
};
usb-phy@c5000000 {
status = "okay";
};
usb@c5004000 {
status = "okay";
nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
GPIO_ACTIVE_LOW>;
};
usb-phy@c5004000 {
status = "okay";
nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
GPIO_ACTIVE_LOW>;
};
usb@c5008000 {
status = "okay";
};
usb-phy@c5008000 {
status = "okay";
};
sdhci@c8000200 {
status = "okay";
cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
power-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
sdhci@c8000600 {
status = "okay";
cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
bus-width = <8>;
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock@0 {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
gpio-keys {
compatible = "gpio-keys";
power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
......
arch/arm/boot/dts/tegra20-iris-512.dts
View file @ 57899053
......@@ -36,31 +36,31 @@ uartd {
};
};
usb@c5000000 {
serial@70006000 {
status = "okay";
};
usb-phy@c5000000 {
serial@70006300 {
status = "okay";
};
usb@c5008000 {
i2c_ddc: i2c@7000c400 {
status = "okay";
};
usb-phy@c5008000 {
usb@c5000000 {
status = "okay";
};
serial@70006000 {
usb-phy@c5000000 {
status = "okay";
};
serial@70006300 {
usb@c5008000 {
status = "okay";
};
i2c_ddc: i2c@7000c400 {
usb-phy@c5008000 {
status = "okay";
};
......
arch/arm/boot/dts/tegra20-seaboard.dts
View file @ 57899053
......@@ -386,6 +386,13 @@ i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
magnetometer@c {
compatible = "ak,ak8975";
reg = <0xc>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_LEVEL_HIGH>;
};
pmic: tps6586x@34 {
compatible = "ti,tps6586x";
reg = <0x34>;
......@@ -507,146 +514,6 @@ temperature-sensor@4c {
compatible = "onnn,nct1008";
reg = <0x4c>;
};
magnetometer@c {
compatible = "ak,ak8975";
reg = <0xc>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_LEVEL_HIGH>;
};
};
pmc@7000e400 {
nvidia,invert-interrupt;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <5000>;
nvidia,cpu-pwr-off-time = <5000>;
nvidia,core-pwr-good-time = <3845 3845>;
nvidia,core-pwr-off-time = <3875>;
nvidia,sys-clock-req-active-high;
};
memory-controller@7000f400 {
emc-table@190000 {
reg = <190000>;
compatible = "nvidia,tegra20-emc-table";
clock-frequency = <190000>;
nvidia,emc-registers = <0x0000000c 0x00000026
0x00000009 0x00000003 0x00000004 0x00000004
0x00000002 0x0000000c 0x00000003 0x00000003
0x00000002 0x00000001 0x00000004 0x00000005
0x00000004 0x00000009 0x0000000d 0x0000059f
0x00000000 0x00000003 0x00000003 0x00000003
0x00000003 0x00000001 0x0000000b 0x000000c8
0x00000003 0x00000007 0x00000004 0x0000000f
0x00000002 0x00000000 0x00000000 0x00000002
0x00000000 0x00000000 0x00000083 0xa06204ae
0x007dc010 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000>;
};
emc-table@380000 {
reg = <380000>;
compatible = "nvidia,tegra20-emc-table";
clock-frequency = <380000>;
nvidia,emc-registers = <0x00000017 0x0000004b
0x00000012 0x00000006 0x00000004 0x00000005
0x00000003 0x0000000c 0x00000006 0x00000006
0x00000003 0x00000001 0x00000004 0x00000005
0x00000004 0x00000009 0x0000000d 0x00000b5f
0x00000000 0x00000003 0x00000003 0x00000006
0x00000006 0x00000001 0x00000011 0x000000c8
0x00000003 0x0000000e 0x00000007 0x0000000f
0x00000002 0x00000000 0x00000000 0x00000002
0x00000000 0x00000000 0x00000083 0xe044048b
0x007d8010 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000>;
};
};
usb@c5000000 {
status = "okay";
dr_mode = "otg";
};
usb-phy@c5000000 {
status = "okay";
vbus-supply = <&vbus_reg>;
dr_mode = "otg";
};
usb@c5004000 {
status = "okay";
nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
GPIO_ACTIVE_LOW>;
};
usb-phy@c5004000 {
status = "okay";
nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
GPIO_ACTIVE_LOW>;
};
usb@c5008000 {
status = "okay";
};
usb-phy@c5008000 {
status = "okay";
};
sdhci@c8000000 {
status = "okay";
power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
keep-power-in-suspend;
};
sdhci@c8000400 {
status = "okay";
cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
sdhci@c8000600 {
status = "okay";
bus-width = <8>;
non-removable;
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock@0 {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
gpio-keys {
compatible = "gpio-keys";
power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
lid {
label = "Lid";
gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
linux,input-type = <5>; /* EV_SW */
linux,code = <0>; /* SW_LID */
debounce-interval = <1>;
gpio-key,wakeup;
};
};
kbc@7000e200 {
......@@ -788,6 +655,140 @@ kbc@7000e200 {
0x1F04008A>; /* KEY_HELP */
};
pmc@7000e400 {
nvidia,invert-interrupt;
nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <5000>;
nvidia,cpu-pwr-off-time = <5000>;
nvidia,core-pwr-good-time = <3845 3845>;
nvidia,core-pwr-off-time = <3875>;
nvidia,sys-clock-req-active-high;
};
memory-controller@7000f400 {
emc-table@190000 {
reg = <190000>;
compatible = "nvidia,tegra20-emc-table";
clock-frequency = <190000>;
nvidia,emc-registers = <0x0000000c 0x00000026
0x00000009 0x00000003 0x00000004 0x00000004
0x00000002 0x0000000c 0x00000003 0x00000003
0x00000002 0x00000001 0x00000004 0x00000005
0x00000004 0x00000009 0x0000000d 0x0000059f
0x00000000 0x00000003 0x00000003 0x00000003
0x00000003 0x00000001 0x0000000b 0x000000c8
0x00000003 0x00000007 0x00000004 0x0000000f
0x00000002 0x00000000 0x00000000 0x00000002
0x00000000 0x00000000 0x00000083 0xa06204ae
0x007dc010 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000>;
};
emc-table@380000 {
reg = <380000>;
compatible = "nvidia,tegra20-emc-table";
clock-frequency = <380000>;
nvidia,emc-registers = <0x00000017 0x0000004b
0x00000012 0x00000006 0x00000004 0x00000005
0x00000003 0x0000000c 0x00000006 0x00000006
0x00000003 0x00000001 0x00000004 0x00000005
0x00000004 0x00000009 0x0000000d 0x00000b5f
0x00000000 0x00000003 0x00000003 0x00000006
0x00000006 0x00000001 0x00000011 0x000000c8
0x00000003 0x0000000e 0x00000007 0x0000000f
0x00000002 0x00000000 0x00000000 0x00000002
0x00000000 0x00000000 0x00000083 0xe044048b
0x007d8010 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000>;
};
};
usb@c5000000 {
status = "okay";
dr_mode = "otg";
};
usb-phy@c5000000 {
status = "okay";
vbus-supply = <&vbus_reg>;
dr_mode = "otg";
};
usb@c5004000 {
status = "okay";
nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
GPIO_ACTIVE_LOW>;
};
usb-phy@c5004000 {
status = "okay";
nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
GPIO_ACTIVE_LOW>;
};
usb@c5008000 {
status = "okay";
};
usb-phy@c5008000 {
status = "okay";
};
sdhci@c8000000 {
status = "okay";
power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
keep-power-in-suspend;
};
sdhci@c8000400 {
status = "okay";
cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
};
sdhci@c8000600 {
status = "okay";
bus-width = <8>;
non-removable;
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock@0 {
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
gpio-keys {
compatible = "gpio-keys";
power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
lid {
label = "Lid";
gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
linux,input-type = <5>; /* EV_SW */
linux,code = <0>; /* SW_LID */
debounce-interval = <1>;
gpio-key,wakeup;
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
......
arch/arm/boot/dts/tegra20-whistler.dts
View file @ 57899053
......@@ -495,6 +495,19 @@ vrtc {
};
};
kbc@7000e200 {
status = "okay";
nvidia,debounce-delay-ms = <20>;
nvidia,repeat-delay-ms = <160>;
nvidia,kbc-row-pins = <0 1 2>;
nvidia,kbc-col-pins = <16 17>;
nvidia,wakeup-source;
linux,keymap = <0x00000074 /* KEY_POWER */
0x01000066 /* KEY_HOME */
0x0101009E /* KEY_BACK */
0x0201008B>; /* KEY_MENU */
};
pmc@7000e400 {
nvidia,invert-interrupt;
nvidia,suspend-mode = <1>;
......@@ -551,19 +564,6 @@ clk32k_in: clock@0 {
};
};
kbc@7000e200 {
status = "okay";
nvidia,debounce-delay-ms = <20>;
nvidia,repeat-delay-ms = <160>;
nvidia,kbc-row-pins = <0 1 2>;
nvidia,kbc-col-pins = <16 17>;
nvidia,wakeup-source;
linux,keymap = <0x00000074 /* KEY_POWER */
0x01000066 /* KEY_HOME */
0x0101009E /* KEY_BACK */
0x0201008B>; /* KEY_MENU */
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
......
arch/arm/boot/dts/tegra30-beaver.dts
View file @ 57899053
......@@ -168,19 +168,6 @@ rt5640: rt5640@1c {
<&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
};
tps62361@60 {
compatible = "ti,tps62361";
reg = <0x60>;
regulator-name = "tps62361-vout";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
ti,vsel0-state-high;
ti,vsel1-state-high;
};
pmic: tps65911@2d {
compatible = "ti,tps65911";
reg = <0x2d>;
......@@ -284,6 +271,19 @@ ldo8_reg: ldo8 {
};
};
};
tps62361@60 {
compatible = "ti,tps62361";
reg = <0x60>;
regulator-name = "tps62361-vout";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
ti,vsel0-state-high;
ti,vsel1-state-high;
};
};
spi@7000da00 {
......@@ -296,12 +296,6 @@ spi-flash@1 {
};
};
ahub@70080000 {
i2s@70080400 {
status = "okay";
};
};
pmc@7000e400 {
status = "okay";
nvidia,invert-interrupt;
......@@ -314,6 +308,12 @@ pmc@7000e400 {
nvidia,sys-clock-req-active-high;
};
ahub@70080000 {
i2s@70080400 {
status = "okay";
};
};
sdhci@78000000 {
status = "okay";
cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
......@@ -350,6 +350,19 @@ clk32k_in: clock@0 {
};
};
gpio-leds {
compatible = "gpio-leds";
gpled1 {
label = "LED1"; /* CR5A1 (blue) */
gpios = <&gpio TEGRA_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
};
gpled2 {
label = "LED2"; /* CR4A2 (green) */
gpios = <&gpio TEGRA_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
......@@ -453,19 +466,6 @@ sys_3v3_pexs_reg: regulator@7 {
};
};
gpio-leds {
compatible = "gpio-leds";
gpled1 {
label = "LED1"; /* CR5A1 (blue) */
gpios = <&gpio TEGRA_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
};
gpled2 {
label = "LED2"; /* CR4A2 (green) */
gpios = <&gpio TEGRA_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
};
};
sound {
compatible = "nvidia,tegra-audio-rt5640-beaver",
"nvidia,tegra-audio-rt5640";
......
arch/arm/boot/dts/tegra30-cardhu-a02.dts
View file @ 57899053
......@@ -8,6 +8,13 @@ / {
model = "NVIDIA Tegra30 Cardhu A02 evaluation board";
compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30";
sdhci@78000400 {
status = "okay";
power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
keep-power-in-suspend;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
......@@ -83,12 +90,5 @@ vdd_bl_reg: regulator@105 {
gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>;
};
};
sdhci@78000400 {
status = "okay";
power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
keep-power-in-suspend;
};
};
arch/arm/boot/dts/tegra30-cardhu-a04.dts
View file @ 57899053
......@@ -8,6 +8,13 @@ / {
model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board";
compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30";
sdhci@78000400 {
status = "okay";
power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
keep-power-in-suspend;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
......@@ -95,11 +102,4 @@ vdd_bl2_reg: regulator@106 {
gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
};
};
sdhci@78000400 {
status = "okay";
power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
bus-width = <4>;
keep-power-in-suspend;
};
};
arch/arm/boot/dts/tegra30-cardhu.dtsi
View file @ 57899053
......@@ -326,12 +326,6 @@ spi-flash@1 {
};
};
ahub@70080000 {
i2s@70080400 {
status = "okay";
};
};
pmc@7000e400 {
status = "okay";
nvidia,invert-interrupt;
......@@ -344,6 +338,12 @@ pmc@7000e400 {
nvidia,sys-clock-req-active-high;
};
ahub@70080000 {
i2s@70080400 {
status = "okay";
};
};
sdhci@78000000 {
status = "okay";
cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7