Commit 5791a73c authored by Alex Elder's avatar Alex Elder Committed by David S. Miller

net: ipa: define IPA remaining GSI register offsets

Add the remaining GSI register offset definitions.  Use gsi_reg()
rather than the corresponding GSI_*_OFFSET() macros to get the
offsets for these registers, and get rid of the macros.

Note that we are now defining information for the HW_PARAM_2
register, and that doesn't appear until IPA v3.5.1.
Signed-off-by: default avatarAlex Elder <elder@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 465d1bc9
......@@ -437,16 +437,18 @@ static void gsi_evt_ring_command(struct gsi *gsi, u32 evt_ring_id,
enum gsi_evt_cmd_opcode opcode)
{
struct device *dev = gsi->dev;
const struct reg *reg;
bool timeout;
u32 val;
/* Enable the completion interrupt for the command */
gsi_irq_ev_ctrl_enable(gsi, evt_ring_id);
reg = gsi_reg(gsi, EV_CH_CMD);
val = u32_encode_bits(evt_ring_id, EV_CHID_FMASK);
val |= u32_encode_bits(opcode, EV_OPCODE_FMASK);
timeout = !gsi_command(gsi, GSI_EV_CH_CMD_OFFSET, val);
timeout = !gsi_command(gsi, reg_offset(reg), val);
gsi_irq_ev_ctrl_disable(gsi);
......@@ -552,15 +554,18 @@ gsi_channel_command(struct gsi_channel *channel, enum gsi_ch_cmd_opcode opcode)
u32 channel_id = gsi_channel_id(channel);
struct gsi *gsi = channel->gsi;
struct device *dev = gsi->dev;
const struct reg *reg;
bool timeout;
u32 val;
/* Enable the completion interrupt for the command */
gsi_irq_ch_ctrl_enable(gsi, channel_id);
reg = gsi_reg(gsi, CH_CMD);
val = u32_encode_bits(channel_id, CH_CHID_FMASK);
val |= u32_encode_bits(opcode, CH_OPCODE_FMASK);
timeout = !gsi_command(gsi, GSI_CH_CMD_OFFSET, val);
timeout = !gsi_command(gsi, reg_offset(reg), val);
gsi_irq_ch_ctrl_disable(gsi);
......@@ -1230,15 +1235,22 @@ static void gsi_isr_glob_err(struct gsi *gsi)
{
enum gsi_err_type type;
enum gsi_err_code code;
const struct reg *reg;
u32 offset;
u32 which;
u32 val;
u32 ee;
/* Get the logged error, then reinitialize the log */
val = ioread32(gsi->virt + GSI_ERROR_LOG_OFFSET);
iowrite32(0, gsi->virt + GSI_ERROR_LOG_OFFSET);
iowrite32(~0, gsi->virt + GSI_ERROR_LOG_CLR_OFFSET);
reg = gsi_reg(gsi, ERROR_LOG);
offset = reg_offset(reg);
val = ioread32(gsi->virt + offset);
iowrite32(0, gsi->virt + offset);
reg = gsi_reg(gsi, ERROR_LOG_CLR);
iowrite32(~0, gsi->virt + reg_offset(reg));
/* Parse the error value */
ee = u32_get_bits(val, ERR_EE_FMASK);
type = u32_get_bits(val, ERR_TYPE_FMASK);
which = u32_get_bits(val, ERR_VIRT_IDX_FMASK);
......@@ -1806,13 +1818,14 @@ static int gsi_generic_command(struct gsi *gsi, u32 channel_id,
iowrite32(val, gsi->virt + offset);
/* Now issue the command */
reg = gsi_reg(gsi, GENERIC_CMD);
val = u32_encode_bits(opcode, GENERIC_OPCODE_FMASK);
val |= u32_encode_bits(channel_id, GENERIC_CHID_FMASK);
val |= u32_encode_bits(GSI_EE_MODEM, GENERIC_EE_FMASK);
if (gsi->version >= IPA_VERSION_4_11)
val |= u32_encode_bits(params, GENERIC_PARAMS_FMASK);
timeout = !gsi_command(gsi, GSI_GENERIC_CMD_OFFSET, val);
timeout = !gsi_command(gsi, reg_offset(reg), val);
/* Disable the GP_INT1 IRQ type again */
reg = gsi_reg(gsi, CNTXT_GLOB_IRQ_EN);
......@@ -2025,6 +2038,7 @@ static void gsi_irq_teardown(struct gsi *gsi)
static int gsi_ring_setup(struct gsi *gsi)
{
struct device *dev = gsi->dev;
const struct reg *reg;
u32 count;
u32 val;
......@@ -2036,7 +2050,8 @@ static int gsi_ring_setup(struct gsi *gsi)
return 0;
}
val = ioread32(gsi->virt + GSI_GSI_HW_PARAM_2_OFFSET);
reg = gsi_reg(gsi, HW_PARAM_2);
val = ioread32(gsi->virt + reg_offset(reg));
count = u32_get_bits(val, NUM_CH_PER_EE_FMASK);
if (!count) {
......@@ -2069,11 +2084,13 @@ static int gsi_ring_setup(struct gsi *gsi)
/* Setup function for GSI. GSI firmware must be loaded and initialized */
int gsi_setup(struct gsi *gsi)
{
const struct reg *reg;
u32 val;
int ret;
/* Here is where we first touch the GSI hardware */
val = ioread32(gsi->virt + GSI_GSI_STATUS_OFFSET);
reg = gsi_reg(gsi, GSI_STATUS);
val = ioread32(gsi->virt + reg_offset(reg));
if (!(val & ENABLED_FMASK)) {
dev_err(gsi->dev, "GSI has not been enabled\n");
return -EIO;
......@@ -2088,7 +2105,8 @@ int gsi_setup(struct gsi *gsi)
goto err_irq_teardown;
/* Initialize the error log */
iowrite32(0, gsi->virt + GSI_ERROR_LOG_OFFSET);
reg = gsi_reg(gsi, ERROR_LOG);
iowrite32(0, gsi->virt + reg_offset(reg));
ret = gsi_channel_setup(gsi);
if (ret)
......
......@@ -98,13 +98,15 @@ static const struct regs *gsi_regs(struct gsi *gsi)
{
switch (gsi->version) {
case IPA_VERSION_3_1:
return &gsi_regs_v3_1;
case IPA_VERSION_3_5_1:
case IPA_VERSION_4_2:
case IPA_VERSION_4_5:
case IPA_VERSION_4_7:
case IPA_VERSION_4_9:
case IPA_VERSION_4_11:
return &gsi_regs_v3_1;
return &gsi_regs_v3_5_1;
default:
return NULL;
......
......@@ -154,12 +154,10 @@ enum gsi_prefetch_mode {
#define MODC_FMASK GENMASK(23, 16)
#define MOD_CNT_FMASK GENMASK(31, 24)
#define GSI_GSI_STATUS_OFFSET \
(0x0001f000 + 0x4000 * GSI_EE_AP)
/* GSI_STATUS register */
#define ENABLED_FMASK GENMASK(0, 0)
#define GSI_CH_CMD_OFFSET \
(0x0001f008 + 0x4000 * GSI_EE_AP)
/* CH_CMD register */
#define CH_CHID_FMASK GENMASK(7, 0)
#define CH_OPCODE_FMASK GENMASK(31, 24)
......@@ -173,8 +171,7 @@ enum gsi_ch_cmd_opcode {
GSI_CH_DB_STOP = 0xb,
};
#define GSI_EV_CH_CMD_OFFSET \
(0x0001f010 + 0x4000 * GSI_EE_AP)
/* EV_CH_CMD register */
#define EV_CHID_FMASK GENMASK(7, 0)
#define EV_OPCODE_FMASK GENMASK(31, 24)
......@@ -185,8 +182,7 @@ enum gsi_evt_cmd_opcode {
GSI_EVT_DE_ALLOC = 0xa,
};
#define GSI_GENERIC_CMD_OFFSET \
(0x0001f018 + 0x4000 * GSI_EE_AP)
/* GENERIC_CMD register */
#define GENERIC_OPCODE_FMASK GENMASK(4, 0)
#define GENERIC_CHID_FMASK GENMASK(9, 5)
#define GENERIC_EE_FMASK GENMASK(13, 10)
......@@ -201,9 +197,7 @@ enum gsi_generic_cmd_opcode {
GSI_GENERIC_QUERY_FLOW_CONTROL = 0x5, /* IPA v4.11+ */
};
/* The next register is present for IPA v3.5.1 and above */
#define GSI_GSI_HW_PARAM_2_OFFSET \
(0x0001f040 + 0x4000 * GSI_EE_AP)
/* HW_PARAM_2 register */ /* IPA v3.5.1+ */
#define IRAM_SIZE_FMASK GENMASK(2, 0)
#define NUM_CH_PER_EE_FMASK GENMASK(7, 3)
#define NUM_EV_PER_EE_FMASK GENMASK(12, 8)
......@@ -272,9 +266,7 @@ enum gsi_general_irq_id {
/* CNTXT_INTSET register */
#define INTYPE_FMASK GENMASK(0, 0)
#define GSI_ERROR_LOG_OFFSET \
(0x0001f200 + 0x4000 * GSI_EE_AP)
/* ERROR_LOG register */
#define ERR_ARG3_FMASK GENMASK(3, 0)
#define ERR_ARG2_FMASK GENMASK(7, 4)
#define ERR_ARG1_FMASK GENMASK(11, 8)
......@@ -302,9 +294,7 @@ enum gsi_err_type {
GSI_ERR_TYPE_EVT = 0x3,
};
#define GSI_ERROR_LOG_CLR_OFFSET \
(0x0001f210 + 0x4000 * GSI_EE_AP)
/* CNTXT_SCRATCH_0 register */
#define INTER_EE_RESULT_FMASK GENMASK(2, 0)
#define GENERIC_EE_RESULT_FMASK GENMASK(7, 5)
......
......@@ -28,6 +28,10 @@ REG_STRIDE(CH_C_CNTXT_3, ch_c_cntxt_3, 0x0001c00c + 0x4000 * GSI_EE_AP, 0x80);
REG_STRIDE(CH_C_QOS, ch_c_qos, 0x0001c05c + 0x4000 * GSI_EE_AP, 0x80);
REG(ERROR_LOG, error_log, 0x0001f200 + 0x4000 * GSI_EE_AP);
REG(ERROR_LOG_CLR, error_log_clr, 0x0001f210 + 0x4000 * GSI_EE_AP);
REG_STRIDE(CH_C_SCRATCH_0, ch_c_scratch_0,
0x0001c060 + 0x4000 * GSI_EE_AP, 0x80);
......@@ -85,6 +89,14 @@ REG_STRIDE(CH_C_DOORBELL_0, ch_c_doorbell_0,
REG_STRIDE(EV_CH_E_DOORBELL_0, ev_ch_e_doorbell_0,
0x0001e100 + 0x4000 * GSI_EE_AP, 0x08);
REG(GSI_STATUS, gsi_status, 0x0001f000 + 0x4000 * GSI_EE_AP);
REG(CH_CMD, ch_cmd, 0x0001f008 + 0x4000 * GSI_EE_AP);
REG(EV_CH_CMD, ev_ch_cmd, 0x0001f010 + 0x4000 * GSI_EE_AP);
REG(GENERIC_CMD, generic_cmd, 0x0001f018 + 0x4000 * GSI_EE_AP);
REG(CNTXT_TYPE_IRQ, cntxt_type_irq, 0x0001f080 + 0x4000 * GSI_EE_AP);
REG(CNTXT_TYPE_IRQ_MSK, cntxt_type_irq_msk, 0x0001f088 + 0x4000 * GSI_EE_AP);
......@@ -156,6 +168,10 @@ static const struct reg *reg_array[] = {
[EV_CH_E_SCRATCH_1] = &reg_ev_ch_e_scratch_1,
[CH_C_DOORBELL_0] = &reg_ch_c_doorbell_0,
[EV_CH_E_DOORBELL_0] = &reg_ev_ch_e_doorbell_0,
[GSI_STATUS] = &reg_gsi_status,
[CH_CMD] = &reg_ch_cmd,
[EV_CH_CMD] = &reg_ev_ch_cmd,
[GENERIC_CMD] = &reg_generic_cmd,
[CNTXT_TYPE_IRQ] = &reg_cntxt_type_irq,
[CNTXT_TYPE_IRQ_MSK] = &reg_cntxt_type_irq_msk,
[CNTXT_SRC_CH_IRQ] = &reg_cntxt_src_ch_irq,
......@@ -174,6 +190,8 @@ static const struct reg *reg_array[] = {
[CNTXT_GSI_IRQ_EN] = &reg_cntxt_gsi_irq_en,
[CNTXT_GSI_IRQ_CLR] = &reg_cntxt_gsi_irq_clr,
[CNTXT_INTSET] = &reg_cntxt_intset,
[ERROR_LOG] = &reg_error_log,
[ERROR_LOG_CLR] = &reg_error_log_clr,
[CNTXT_SCRATCH_0] = &reg_cntxt_scratch_0,
};
......
......@@ -28,6 +28,10 @@ REG_STRIDE(CH_C_CNTXT_3, ch_c_cntxt_3, 0x0001c00c + 0x4000 * GSI_EE_AP, 0x80);
REG_STRIDE(CH_C_QOS, ch_c_qos, 0x0001c05c + 0x4000 * GSI_EE_AP, 0x80);
REG(ERROR_LOG, error_log, 0x0001f200 + 0x4000 * GSI_EE_AP);
REG(ERROR_LOG_CLR, error_log_clr, 0x0001f210 + 0x4000 * GSI_EE_AP);
REG_STRIDE(CH_C_SCRATCH_0, ch_c_scratch_0,
0x0001c060 + 0x4000 * GSI_EE_AP, 0x80);
......@@ -85,6 +89,16 @@ REG_STRIDE(CH_C_DOORBELL_0, ch_c_doorbell_0,
REG_STRIDE(EV_CH_E_DOORBELL_0, ev_ch_e_doorbell_0,
0x0001e100 + 0x4000 * GSI_EE_AP, 0x08);
REG(GSI_STATUS, gsi_status, 0x0001f000 + 0x4000 * GSI_EE_AP);
REG(CH_CMD, ch_cmd, 0x0001f008 + 0x4000 * GSI_EE_AP);
REG(EV_CH_CMD, ev_ch_cmd, 0x0001f010 + 0x4000 * GSI_EE_AP);
REG(GENERIC_CMD, generic_cmd, 0x0001f018 + 0x4000 * GSI_EE_AP);
REG(HW_PARAM_2, hw_param_2, 0x0001f040 + 0x4000 * GSI_EE_AP);
REG(CNTXT_TYPE_IRQ, cntxt_type_irq, 0x0001f080 + 0x4000 * GSI_EE_AP);
REG(CNTXT_TYPE_IRQ_MSK, cntxt_type_irq_msk, 0x0001f088 + 0x4000 * GSI_EE_AP);
......@@ -156,6 +170,11 @@ static const struct reg *reg_array[] = {
[EV_CH_E_SCRATCH_1] = &reg_ev_ch_e_scratch_1,
[CH_C_DOORBELL_0] = &reg_ch_c_doorbell_0,
[EV_CH_E_DOORBELL_0] = &reg_ev_ch_e_doorbell_0,
[GSI_STATUS] = &reg_gsi_status,
[CH_CMD] = &reg_ch_cmd,
[EV_CH_CMD] = &reg_ev_ch_cmd,
[GENERIC_CMD] = &reg_generic_cmd,
[HW_PARAM_2] = &reg_hw_param_2,
[CNTXT_TYPE_IRQ] = &reg_cntxt_type_irq,
[CNTXT_TYPE_IRQ_MSK] = &reg_cntxt_type_irq_msk,
[CNTXT_SRC_CH_IRQ] = &reg_cntxt_src_ch_irq,
......@@ -174,6 +193,8 @@ static const struct reg *reg_array[] = {
[CNTXT_GSI_IRQ_EN] = &reg_cntxt_gsi_irq_en,
[CNTXT_GSI_IRQ_CLR] = &reg_cntxt_gsi_irq_clr,
[CNTXT_INTSET] = &reg_cntxt_intset,
[ERROR_LOG] = &reg_error_log,
[ERROR_LOG_CLR] = &reg_error_log_clr,
[CNTXT_SCRATCH_0] = &reg_cntxt_scratch_0,
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment