Commit 57c92724 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'microblaze-v6.1' of git://git.monstr.eu/linux-2.6-microblaze

Pull microblaze updates from Michal Simek:
 "This adds architecture support for error injection which can be done
  only via local memory (BRAM) with enabling path for recovery after
  reset.

  These patches targets Triple Modular Redundacy (TMR) configuration
  where 3 Microblazes are running in parallel with monitoring logic.

  When an error happens (or is injected) system goes to break handler
  with full CPU reset and system recovery back to origin context. More
  information can be found at [1]"

Link: https://www.xilinx.com/content/dam/xilinx/support/documents/ip_documentation/tmr/v1_0/pg268-tmr.pdf [1]

* tag 'microblaze-v6.1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Add support for error injection
  microblaze: Add custom break vector handler for mb manager
  microblaze: Add xmb_manager_register function
parents ef688f8b adc4cefa
...@@ -204,6 +204,16 @@ config TASK_SIZE ...@@ -204,6 +204,16 @@ config TASK_SIZE
hex "Size of user task space" if TASK_SIZE_BOOL hex "Size of user task space" if TASK_SIZE_BOOL
default "0x80000000" default "0x80000000"
config MB_MANAGER
bool "Support for Microblaze Manager"
depends on ADVANCED_OPTIONS
help
This option enables API for configuring the MicroBlaze manager
control register, which is consumed by the break handler to
block the break.
Say N here unless you know what you are doing.
endmenu endmenu
menu "Bus Options" menu "Bus Options"
......
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2022 Xilinx, Inc.
*/
#ifndef _XILINX_MB_MANAGER_H
#define _XILINX_MB_MANAGER_H
# ifndef __ASSEMBLY__
#include <linux/of_address.h>
/*
* When the break vector gets asserted because of error injection, the break
* signal must be blocked before exiting from the break handler, Below api
* updates the manager address and control register and error counter callback
* arguments, which will be used by the break handler to block the break and
* call the callback function.
*/
void xmb_manager_register(uintptr_t phys_baseaddr, u32 cr_val,
void (*callback)(void *data),
void *priv, void (*reset_callback)(void *data));
asmlinkage void xmb_inject_err(void);
# endif /* __ASSEMBLY__ */
/* Error injection offset */
#define XMB_INJECT_ERR_OFFSET 0x200
#endif /* _XILINX_MB_MANAGER_H */
...@@ -120,5 +120,12 @@ int main(int argc, char *argv[]) ...@@ -120,5 +120,12 @@ int main(int argc, char *argv[])
DEFINE(CC_FSR, offsetof(struct cpu_context, fsr)); DEFINE(CC_FSR, offsetof(struct cpu_context, fsr));
BLANK(); BLANK();
/* struct cpuinfo */
DEFINE(CI_DCS, offsetof(struct cpuinfo, dcache_size));
DEFINE(CI_DCL, offsetof(struct cpuinfo, dcache_line_length));
DEFINE(CI_ICS, offsetof(struct cpuinfo, icache_size));
DEFINE(CI_ICL, offsetof(struct cpuinfo, icache_line_length));
BLANK();
return 0; return 0;
} }
...@@ -27,9 +27,11 @@ ...@@ -27,9 +27,11 @@
#include <asm/page.h> #include <asm/page.h>
#include <asm/unistd.h> #include <asm/unistd.h>
#include <asm/xilinx_mb_manager.h>
#include <linux/errno.h> #include <linux/errno.h>
#include <asm/signal.h> #include <asm/signal.h>
#include <asm/mmu.h>
#undef DEBUG #undef DEBUG
...@@ -287,6 +289,44 @@ syscall_debug_table: ...@@ -287,6 +289,44 @@ syscall_debug_table:
.text .text
.extern cpuinfo
C_ENTRY(mb_flush_dcache):
addik r1, r1, -PT_SIZE
SAVE_REGS
addik r3, r0, cpuinfo
lwi r7, r3, CI_DCS
lwi r8, r3, CI_DCL
sub r9, r7, r8
1:
wdc.flush r9, r0
bgtid r9, 1b
addk r9, r9, r8
RESTORE_REGS
addik r1, r1, PT_SIZE
rtsd r15, 8
nop
C_ENTRY(mb_invalidate_icache):
addik r1, r1, -PT_SIZE
SAVE_REGS
addik r3, r0, cpuinfo
lwi r7, r3, CI_ICS
lwi r8, r3, CI_ICL
sub r9, r7, r8
1:
wic r9, r0
bgtid r9, 1b
addk r9, r9, r8
RESTORE_REGS
addik r1, r1, PT_SIZE
rtsd r15, 8
nop
/* /*
* User trap. * User trap.
* *
...@@ -753,6 +793,160 @@ IRQ_return: /* MS: Make global symbol for debugging */ ...@@ -753,6 +793,160 @@ IRQ_return: /* MS: Make global symbol for debugging */
rtid r14, 0 rtid r14, 0
nop nop
#ifdef CONFIG_MB_MANAGER
#define PT_PID PT_SIZE
#define PT_TLBI PT_SIZE + 4
#define PT_ZPR PT_SIZE + 8
#define PT_TLBL0 PT_SIZE + 12
#define PT_TLBH0 PT_SIZE + 16
C_ENTRY(_xtmr_manager_reset):
lwi r1, r0, xmb_manager_stackpointer
/* Restore MSR */
lwi r2, r1, PT_MSR
mts rmsr, r2
bri 4
/* restore Special purpose registers */
lwi r2, r1, PT_PID
mts rpid, r2
lwi r2, r1, PT_TLBI
mts rtlbx, r2
lwi r2, r1, PT_ZPR
mts rzpr, r2
#if CONFIG_XILINX_MICROBLAZE0_USE_FPU
lwi r2, r1, PT_FSR
mts rfsr, r2
#endif
/* restore all the tlb's */
addik r3, r0, TOPHYS(tlb_skip)
addik r6, r0, PT_TLBL0
addik r7, r0, PT_TLBH0
restore_tlb:
add r6, r6, r1
add r7, r7, r1
lwi r2, r6, 0
mts rtlblo, r2
lwi r2, r7, 0
mts rtlbhi, r2
addik r6, r6, 4
addik r7, r7, 4
bgtid r3, restore_tlb
addik r3, r3, -1
lwi r5, r0, TOPHYS(xmb_manager_dev)
lwi r8, r0, TOPHYS(xmb_manager_reset_callback)
set_vms
/* return from reset need -8 to adjust for rtsd r15, 8 */
addik r15, r0, ret_from_reset - 8
rtbd r8, 0
nop
ret_from_reset:
set_bip /* Ints masked for state restore */
VM_OFF
/* MS: Restore all regs */
RESTORE_REGS
lwi r14, r1, PT_R14
lwi r16, r1, PT_PC
addik r1, r1, PT_SIZE + 36
rtbd r16, 0
nop
/*
* Break handler for MB Manager. Enter to _xmb_manager_break by
* injecting fault in one of the TMR Microblaze core.
* FIXME: This break handler supports getting
* called from kernel space only.
*/
C_ENTRY(_xmb_manager_break):
/*
* Reserve memory in the stack for context store/restore
* (which includes memory for storing tlbs (max two tlbs))
*/
addik r1, r1, -PT_SIZE - 36
swi r1, r0, xmb_manager_stackpointer
SAVE_REGS
swi r14, r1, PT_R14 /* rewrite saved R14 value */
swi r16, r1, PT_PC; /* PC and r16 are the same */
lwi r6, r0, TOPHYS(xmb_manager_baseaddr)
lwi r7, r0, TOPHYS(xmb_manager_crval)
/*
* When the break vector gets asserted because of error injection,
* the break signal must be blocked before exiting from the
* break handler, below code configures the tmr manager
* control register to block break signal.
*/
swi r7, r6, 0
/* Save the special purpose registers */
mfs r2, rpid
swi r2, r1, PT_PID
mfs r2, rtlbx
swi r2, r1, PT_TLBI
mfs r2, rzpr
swi r2, r1, PT_ZPR
#if CONFIG_XILINX_MICROBLAZE0_USE_FPU
mfs r2, rfsr
swi r2, r1, PT_FSR
#endif
mfs r2, rmsr
swi r2, r1, PT_MSR
/* Save all the tlb's */
addik r3, r0, TOPHYS(tlb_skip)
addik r6, r0, PT_TLBL0
addik r7, r0, PT_TLBH0
save_tlb:
add r6, r6, r1
add r7, r7, r1
mfs r2, rtlblo
swi r2, r6, 0
mfs r2, rtlbhi
swi r2, r7, 0
addik r6, r6, 4
addik r7, r7, 4
bgtid r3, save_tlb
addik r3, r3, -1
lwi r5, r0, TOPHYS(xmb_manager_dev)
lwi r8, r0, TOPHYS(xmb_manager_callback)
/* return from break need -8 to adjust for rtsd r15, 8 */
addik r15, r0, ret_from_break - 8
rtbd r8, 0
nop
ret_from_break:
/* flush the d-cache */
bralid r15, mb_flush_dcache
nop
/*
* To make sure microblaze i-cache is in a proper state
* invalidate the i-cache.
*/
bralid r15, mb_invalidate_icache
nop
set_bip; /* Ints masked for state restore */
VM_OFF;
mbar 1
mbar 2
bri 4
suspend
nop
#endif
/* /*
* Debug trap for KGDB. Enter to _debug_exception by brki r16, 0x18 * Debug trap for KGDB. Enter to _debug_exception by brki r16, 0x18
* and call handling function with saved pt_regs * and call handling function with saved pt_regs
...@@ -957,6 +1151,88 @@ ENTRY(_switch_to) ...@@ -957,6 +1151,88 @@ ENTRY(_switch_to)
rtsd r15, 8 rtsd r15, 8
nop nop
#ifdef CONFIG_MB_MANAGER
.global xmb_inject_err
.section .text
.align 2
.ent xmb_inject_err
.type xmb_inject_err, @function
xmb_inject_err:
addik r1, r1, -PT_SIZE
SAVE_REGS
/* Switch to real mode */
VM_OFF;
set_bip;
mbar 1
mbar 2
bralid r15, XMB_INJECT_ERR_OFFSET
nop;
/* enable virtual mode */
set_vms;
/* barrier for instructions and data accesses */
mbar 1
mbar 2
/*
* Enable Interrupts, Virtual Protected Mode, equalize
* initial state for all possible entries.
*/
rtbd r0, 1f
nop;
1:
RESTORE_REGS
addik r1, r1, PT_SIZE
rtsd r15, 8;
nop;
.end xmb_inject_err
.section .data
.global xmb_manager_dev
.global xmb_manager_baseaddr
.global xmb_manager_crval
.global xmb_manager_callback
.global xmb_manager_reset_callback
.global xmb_manager_stackpointer
.align 4
xmb_manager_dev:
.long 0
xmb_manager_baseaddr:
.long 0
xmb_manager_crval:
.long 0
xmb_manager_callback:
.long 0
xmb_manager_reset_callback:
.long 0
xmb_manager_stackpointer:
.long 0
/*
* When the break vector gets asserted because of error injection,
* the break signal must be blocked before exiting from the
* break handler, Below api updates the manager address and
* control register and error count callback arguments,
* which will be used by the break handler to block the
* break and call the callback function.
*/
.global xmb_manager_register
.section .text
.align 2
.ent xmb_manager_register
.type xmb_manager_register, @function
xmb_manager_register:
swi r5, r0, xmb_manager_baseaddr
swi r6, r0, xmb_manager_crval
swi r7, r0, xmb_manager_callback
swi r8, r0, xmb_manager_dev
swi r9, r0, xmb_manager_reset_callback
rtsd r15, 8;
nop;
.end xmb_manager_register
#endif
ENTRY(_reset) ENTRY(_reset)
VM_OFF VM_OFF
brai 0; /* Jump to reset vector */ brai 0; /* Jump to reset vector */
...@@ -964,19 +1240,43 @@ ENTRY(_reset) ...@@ -964,19 +1240,43 @@ ENTRY(_reset)
/* These are compiled and loaded into high memory, then /* These are compiled and loaded into high memory, then
* copied into place in mach_early_setup */ * copied into place in mach_early_setup */
.section .init.ivt, "ax" .section .init.ivt, "ax"
#if CONFIG_MANUAL_RESET_VECTOR #if CONFIG_MANUAL_RESET_VECTOR && !defined(CONFIG_MB_MANAGER)
.org 0x0 .org 0x0
brai CONFIG_MANUAL_RESET_VECTOR brai CONFIG_MANUAL_RESET_VECTOR
#elif defined(CONFIG_MB_MANAGER)
.org 0x0
brai TOPHYS(_xtmr_manager_reset);
#endif #endif
.org 0x8 .org 0x8
brai TOPHYS(_user_exception); /* syscall handler */ brai TOPHYS(_user_exception); /* syscall handler */
.org 0x10 .org 0x10
brai TOPHYS(_interrupt); /* Interrupt handler */ brai TOPHYS(_interrupt); /* Interrupt handler */
#ifdef CONFIG_MB_MANAGER
.org 0x18
brai TOPHYS(_xmb_manager_break); /* microblaze manager break handler */
#else
.org 0x18 .org 0x18
brai TOPHYS(_debug_exception); /* debug trap handler */ brai TOPHYS(_debug_exception); /* debug trap handler */
#endif
.org 0x20 .org 0x20
brai TOPHYS(_hw_exception_handler); /* HW exception handler */ brai TOPHYS(_hw_exception_handler); /* HW exception handler */
#ifdef CONFIG_MB_MANAGER
/*
* For TMR Inject API which injects the error should
* be executed from LMB.
* TMR Inject is programmed with address of 0x200 so that
* when program counter matches with this address error will
* be injected. 0x200 is expected to be next available bram
* offset, hence used for this api.
*/
.org XMB_INJECT_ERR_OFFSET
xmb_inject_error:
nop
rtsd r15, 8
nop
#endif
.section .rodata,"a" .section .rodata,"a"
#include "syscall_table.S" #include "syscall_table.S"
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment