arm: dts: ti: omap: Fix OPP table node names

Fix the opp table node names for opps to be compliant with bindings.
Signed-off-by: Nishanth Menon <nm@ti.com>
Message-ID: <20230724153911.1376830-4-nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/ti/omap/am335x-boneblack.dts

@@ -20,7 +20,8 @@ &cpu0_opp_table {
 	 * BeagleBone Blacks have PG 2.0 silicon which is guaranteed
 	 * to support 1GHz OPP so enable it for PG 2.0 on this board.
 	 */
-	oppnitro-1000000000 {
+	opp-1000000000 {
+		/* OPP Nitro */
 		opp-supported-hw = <0x06 0x0100>;
 	};
 };

arch/arm/boot/dts/ti/omap/am335x-osd335x-common.dtsi

@@ -28,7 +28,8 @@ &cpu0_opp_table {
 	* the HW OPP table, the silicon looks like it is Revision 1.0 (ie the
 	* EFUSE_SMA register reads as all zeros).
 	*/
-	oppnitro-1000000000 {
+	opp-1000000000 {
+		/* OPP Nitro */
 		opp-supported-hw = <0x06 0x0100>;
 	};
 };

arch/arm/boot/dts/ti/omap/am33xx.dtsi

@@ -80,64 +80,74 @@ cpu0_opp_table: opp-table {
 		 * because the can not be enabled simultaneously on a
 		 * single SoC.
 		 */
-		opp50-300000000 {
+		opp-50-300000000{
+			/* OPP50 */
 			opp-hz = /bits/ 64 <300000000>;
 			opp-microvolt = <950000 931000 969000>;
 			opp-supported-hw = <0x06 0x0010>;
 			opp-suspend;
 		};
 
-		opp100-275000000 {
+		opp-100-275000000{
+			/* OPP100-1 */
 			opp-hz = /bits/ 64 <275000000>;
 			opp-microvolt = <1100000 1078000 1122000>;
 			opp-supported-hw = <0x01 0x00FF>;
 			opp-suspend;
 		};
 
-		opp100-300000000 {
+		opp-100-300000000{
+			/* OPP100-2 */
 			opp-hz = /bits/ 64 <300000000>;
 			opp-microvolt = <1100000 1078000 1122000>;
 			opp-supported-hw = <0x06 0x0020>;
 			opp-suspend;
 		};
 
-		opp100-500000000 {
+		opp-100-500000000{
+			/* OPP100-3 */
 			opp-hz = /bits/ 64 <500000000>;
 			opp-microvolt = <1100000 1078000 1122000>;
 			opp-supported-hw = <0x01 0xFFFF>;
 		};
 
-		opp100-600000000 {
+		opp-100-600000000 {
+			/* OPP100-4 */
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <1100000 1078000 1122000>;
 			opp-supported-hw = <0x06 0x0040>;
 		};
 
-		opp120-600000000 {
+		opp-120-600000000 {
+			/* OPP120-1 */
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <1200000 1176000 1224000>;
 			opp-supported-hw = <0x01 0xFFFF>;
 		};
 
-		opp120-720000000 {
+		opp-120-720000000 {
+			/* OPP120-2 */
 			opp-hz = /bits/ 64 <720000000>;
 			opp-microvolt = <1200000 1176000 1224000>;
 			opp-supported-hw = <0x06 0x0080>;
 		};
 
-		oppturbo-720000000 {
+		opp-720000000 {
+			/* OPP Turbo-1 */
 			opp-hz = /bits/ 64 <720000000>;
 			opp-microvolt = <1260000 1234800 1285200>;
 			opp-supported-hw = <0x01 0xFFFF>;
 		};
 
-		oppturbo-800000000 {
+		opp-800000000 {
+			/* OPP Turbo-2 */
 			opp-hz = /bits/ 64 <800000000>;
 			opp-microvolt = <1260000 1234800 1285200>;
 			opp-supported-hw = <0x06 0x0100>;
 		};
 
-		oppnitro-1000000000 {
+		opp-1000000000 {
+			/* OPP Nitro */
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <1325000 1298500 1351500>;
 			opp-supported-hw = <0x04 0x0200>;

arch/arm/boot/dts/ti/omap/am3517.dtsi

@@ -34,14 +34,16 @@ cpu0_opp_table: opp-table {
 		 * appear to operate at 300MHz as well. Since AM3517 only
 		 * lists one operating voltage, it will remain fixed at 1.2V
 		 */
-		opp50-300000000 {
+		opp-50-300000000 {
+			/* OPP50 */
 			opp-hz = /bits/ 64 <300000000>;
 			opp-microvolt = <1200000>;
 			opp-supported-hw = <0xffffffff 0xffffffff>;
 			opp-suspend;
 		};
 
-		opp100-600000000 {
+		opp-100-600000000 {
+			/* OPP100 */
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <1200000>;
 			opp-supported-hw = <0xffffffff 0xffffffff>;

arch/arm/boot/dts/ti/omap/am4372.dtsi

@@ -70,32 +70,37 @@ cpu0_opp_table: opp-table {
 		compatible = "operating-points-v2-ti-cpu";
 		syscon = <&scm_conf>;
 
-		opp50-300000000 {
+		opp-50-300000000 {
+			/* OPP50 */
 			opp-hz = /bits/ 64 <300000000>;
 			opp-microvolt = <950000 931000 969000>;
 			opp-supported-hw = <0xFF 0x01>;
 			opp-suspend;
 		};
 
-		opp100-600000000 {
+		opp-100-600000000 {
+			/* OPP100 */
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <1100000 1078000 1122000>;
 			opp-supported-hw = <0xFF 0x04>;
 		};
 
-		opp120-720000000 {
+		opp-120-720000000 {
+			/* OPP120 */
 			opp-hz = /bits/ 64 <720000000>;
 			opp-microvolt = <1200000 1176000 1224000>;
 			opp-supported-hw = <0xFF 0x08>;
 		};
 
-		oppturbo-800000000 {
+		opp-800000000{
+			/* OPP Turbo */
 			opp-hz = /bits/ 64 <800000000>;
 			opp-microvolt = <1260000 1234800 1285200>;
 			opp-supported-hw = <0xFF 0x10>;
 		};
 
-		oppnitro-1000000000 {
+		opp-1000000000 {
+			/* OPP Nitro */
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <1325000 1298500 1351500>;
 			opp-supported-hw = <0xFF 0x20>;

arch/arm/boot/dts/ti/omap/am437x-idk-evm.dts

@@ -527,11 +527,13 @@ &cpu0_opp_table {
 	 * Supply voltage supervisor on board will not allow opp50 so
 	 * disable it and set opp100 as suspend OPP.
 	 */
-	opp50-300000000 {
+	opp-50-300000000 {
+		/* opp50-300000000 */
 		status = "disabled";
 	};
 
-	opp100-600000000 {
+	opp-100-600000000 {
+		/* opp100-600000000 */
 		opp-suspend;
 	};
 };

arch/arm/boot/dts/ti/omap/dra7.dtsi

@@ -101,7 +101,8 @@ cpu0_opp_table: opp-table {
 		compatible = "operating-points-v2-ti-cpu";
 		syscon = <&scm_wkup>;
 
-		opp_nom-1000000000 {
+		opp-1000000000 {
+			/* OPP NOM */
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <1060000 850000 1150000>,
 					<1060000 850000 1150000>;
@@ -109,7 +110,8 @@ opp_nom-1000000000 {
 			opp-suspend;
 		};
 
-		opp_od-1176000000 {
+		opp-1176000000 {
+			/* OPP OD */
 			opp-hz = /bits/ 64 <1176000000>;
 			opp-microvolt = <1160000 885000 1160000>,
 					<1160000 885000 1160000>;
@@ -117,7 +119,8 @@ opp_od-1176000000 {
 			opp-supported-hw = <0xFF 0x02>;
 		};
 
-		opp_high@1500000000 {
+		opp-1500000000 {
+			/* OPP High */
 			opp-hz = /bits/ 64 <1500000000>;
 			opp-microvolt = <1210000 950000 1250000>,
 					<1210000 950000 1250000>;

arch/arm/boot/dts/ti/omap/dra76x.dtsi

@@ -130,7 +130,8 @@ &mmc3 {
 };
 
 &cpu0_opp_table {
-	opp_plus@1800000000 {
+	opp-1800000000 {
+		/* OPP Plus */
 		opp-hz = /bits/ 64 <1800000000>;
 		opp-microvolt = <1250000 950000 1250000>,
 				<1250000 950000 1250000>;

arch/arm/boot/dts/ti/omap/omap34xx.dtsi

@@ -25,7 +25,7 @@ cpu0_opp_table: opp-table {
 		compatible = "operating-points-v2-ti-cpu";
 		syscon = <&scm_conf>;
 
-		opp1-125000000 {
+		opp-125000000 {
 			opp-hz = /bits/ 64 <125000000>;
 			/*
 			 * we currently only select the max voltage from table
@@ -40,32 +40,32 @@ opp1-125000000 {
 			opp-supported-hw = <0xffffffff 3>;
 		};
 
-		opp2-250000000 {
+		opp-250000000 {
 			opp-hz = /bits/ 64 <250000000>;
 			opp-microvolt = <1075000 1075000 1075000>;
 			opp-supported-hw = <0xffffffff 3>;
 			opp-suspend;
 		};
 
-		opp3-500000000 {
+		opp-500000000 {
 			opp-hz = /bits/ 64 <500000000>;
 			opp-microvolt = <1200000 1200000 1200000>;
 			opp-supported-hw = <0xffffffff 3>;
 		};
 
-		opp4-550000000 {
+		opp-550000000 {
 			opp-hz = /bits/ 64 <550000000>;
 			opp-microvolt = <1275000 1275000 1275000>;
 			opp-supported-hw = <0xffffffff 3>;
 		};
 
-		opp5-600000000 {
+		opp-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <1350000 1350000 1350000>;
 			opp-supported-hw = <0xffffffff 3>;
 		};
 
-		opp6-720000000 {
+		opp-720000000 {
 			opp-hz = /bits/ 64 <720000000>;
 			opp-microvolt = <1350000 1350000 1350000>;
 			/* only high-speed grade omap3530 devices */

arch/arm/boot/dts/ti/omap/omap36xx.dtsi

@@ -30,7 +30,8 @@ cpu0_opp_table: opp-table {
 		compatible = "operating-points-v2-ti-cpu";
 		syscon = <&scm_conf>;
 
-		opp50-300000000 {
+		opp-50-300000000 {
+			/* OPP50 */
 			opp-hz = /bits/ 64 <300000000>;
 			/*
 			 * we currently only select the max voltage from table
@@ -48,21 +49,24 @@ opp50-300000000 {
 			opp-suspend;
 		};
 
-		opp100-600000000 {
+		opp-100-600000000 {
+			/* OPP100 */
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <1200000 1200000 1200000>,
 					 <1200000 1200000 1200000>;
 			opp-supported-hw = <0xffffffff 3>;
 		};
 
-		opp130-800000000 {
+		opp-130-800000000 {
+			/* OPP130 */
 			opp-hz = /bits/ 64 <800000000>;
 			opp-microvolt = <1325000 1325000 1325000>,
 					 <1325000 1325000 1325000>;
 			opp-supported-hw = <0xffffffff 3>;
 		};
 
-		opp1g-1000000000 {
+		opp-1000000000 {
+			/* OPP1G */
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <1375000 1375000 1375000>,
 					 <1375000 1375000 1375000>;