Commit 58968625 authored by Tony Lindgren's avatar Tony Lindgren Committed by Linus Walleij

pinctrl: single: Clear pin interrupts enabled by bootloader

Since we set up device wake-up interrupts as pinctrl-single
interrupts, we now must use the standard request_irq and
related functions to manage them.

If the pin interrupts are enabled for some pins at boot,
the wake-up events can show up as constantly pending
at least on omaps and will hang the system unless the related
device driver clears the event at the device.

To fix this, let's clear the interrupt flags during init,
and print out a warning so the board maintainers can update
their drivers to do proper request_irq for the driver specific
wake-up events.

Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent a73d2e30
......@@ -810,6 +810,7 @@ static const struct pinconf_ops pcs_pinconf_ops = {
static int pcs_add_pin(struct pcs_device *pcs, unsigned offset,
unsigned pin_pos)
{
struct pcs_soc_data *pcs_soc = &pcs->socdata;
struct pinctrl_pin_desc *pin;
struct pcs_name *pn;
int i;
......@@ -821,6 +822,18 @@ static int pcs_add_pin(struct pcs_device *pcs, unsigned offset,
return -ENOMEM;
}
if (pcs_soc->irq_enable_mask) {
unsigned val;
val = pcs->read(pcs->base + offset);
if (val & pcs_soc->irq_enable_mask) {
dev_dbg(pcs->dev, "irq enabled at boot for pin at %lx (%x), clearing\n",
(unsigned long)pcs->res->start + offset, val);
val &= ~pcs_soc->irq_enable_mask;
pcs->write(val, pcs->base + offset);
}
}
pin = &pcs->pins.pa[i];
pn = &pcs->names[i];
sprintf(pn->name, "%lx.%d",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment