[ARM] 3963/1: AT91: Update configuration files

A number of configuration file changes.

These are mainly to replace references to ARCH_AT91RM9200 and
ARCH_AT91SAM9261 with the common/generic ARCH_AT91.  That way we don't
need to mention every specific AT91 processor explicitly.

Also adds the configuration option for AT91SAM9260-EK and AT91SAM9261-EK
boards.
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/Kconfig

@@ -583,7 +583,7 @@ config LEDS
 		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
 		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
 		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-		   ARCH_AT91RM9200 || MACH_TRIZEPS4
+		   ARCH_AT91 || MACH_TRIZEPS4
 	help
 	  If you say Y here, the LEDs on your machine will be used
 	  to provide useful information about your current system status.

arch/arm/configs/csb637_defconfig

@@ -623,7 +623,7 @@ CONFIG_AT91RM9200_WATCHDOG=y
 # CONFIG_USBPCWATCHDOG is not set
 # CONFIG_NVRAM is not set
 CONFIG_RTC=y
-# CONFIG_AT91_RTC is not set
+# CONFIG_AT91RM9200_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 

arch/arm/configs/kb9202_defconfig

@@ -437,7 +437,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_WATCHDOG is not set
 # CONFIG_NVRAM is not set
 # CONFIG_RTC is not set
-# CONFIG_AT91_RTC is not set
+# CONFIG_AT91RM9200_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 

arch/arm/mach-at91rm9200/Kconfig

@@ -92,6 +92,13 @@ if ARCH_AT91SAM9260
 
 comment "AT91SAM9260 Board Type"
 
+config MACH_AT91SAM9260EK
+	bool "Atmel AT91SAM9260-EK Evaluation Kit"
+	depends on ARCH_AT91SAM9260
+	help
+	  Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
+
 endif
 
 # ----------------------------------------------------------
@@ -100,8 +107,31 @@ if ARCH_AT91SAM9261
 
 comment "AT91SAM9261 Board Type"
 
+config MACH_AT91SAM9261EK
+	bool "Atmel AT91SAM9261-EK Evaluation Kit"
+	depends on ARCH_AT91SAM9261
+	help
+	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
+
 endif
 
+# ----------------------------------------------------------
+
+comment "AT91 Board Options"
+
+config MTD_AT91_DATAFLASH_CARD
+	bool "Enable DataFlash Card support"
+	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK)
+	help
+	  Enable support for the DataFlash card.
+
+config MTD_NAND_AT91_BUSWIDTH_16
+	bool "Enable 16-bit data bus interface to NAND flash"
+	depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK)
+	help
+	  On AT91SAM926x boards both types of NAND flash can be present
+	  (8 and 16 bit data bus width).
 
 # ----------------------------------------------------------
 

drivers/mmc/Kconfig

@@ -91,11 +91,11 @@ config MMC_AU1X
 
 	  If unsure, say N.
 
-config MMC_AT91RM9200
-	tristate "AT91RM9200 SD/MMC Card Interface support"
-	depends on ARCH_AT91RM9200 && MMC
+config MMC_AT91
+	tristate "AT91 SD/MMC Card Interface support"
+	depends on ARCH_AT91 && MMC
 	help
-	  This selects the AT91RM9200 MCI controller.
+	  This selects the AT91 MCI controller.
 
 	  If unsure, say N.
 

drivers/mmc/Makefile

@@ -22,7 +22,7 @@ obj-$(CONFIG_MMC_SDHCI)		+= sdhci.o
 obj-$(CONFIG_MMC_WBSD)		+= wbsd.o
 obj-$(CONFIG_MMC_AU1X)		+= au1xmmc.o
 obj-$(CONFIG_MMC_OMAP)		+= omap.o
-obj-$(CONFIG_MMC_AT91RM9200)	+= at91_mci.o
+obj-$(CONFIG_MMC_AT91)		+= at91_mci.o
 obj-$(CONFIG_MMC_TIFM_SD)	+= tifm_sd.o
 
 mmc_core-y := mmc.o mmc_sysfs.o

drivers/usb/Kconfig

@@ -24,7 +24,7 @@ config USB_ARCH_HAS_OHCI
 	default y if ARCH_S3C2410
 	default y if PXA27x
 	default y if ARCH_EP93XX
-	default y if (ARCH_AT91RM9200 || ARCH_AT91SAM9261)
+	default y if ARCH_AT91
 	default y if ARCH_PNX4008
 	# PPC:
 	default y if STB03xxx

drivers/usb/gadget/Kconfig

@@ -189,7 +189,7 @@ config USB_OTG
 
 config USB_GADGET_AT91
 	boolean "AT91 USB Device Port"
-	depends on ARCH_AT91RM9200
+	depends on ARCH_AT91
 	select USB_GADGET_SELECTED
 	help
 	   Many Atmel AT91 processors (such as the AT91RM2000) have a

drivers/usb/host/ohci-hcd.c

@@ -935,7 +935,7 @@ MODULE_LICENSE ("GPL");
 #include "ohci-ppc-soc.c"
 #endif
 
-#if defined(CONFIG_ARCH_AT91RM9200) || defined(CONFIG_ARCH_AT91SAM9261)
+#ifdef CONFIG_ARCH_AT91
 #include "ohci-at91.c"
 #endif
 
@@ -952,8 +952,7 @@ MODULE_LICENSE ("GPL");
       || defined (CONFIG_ARCH_EP93XX) \
       || defined (CONFIG_SOC_AU1X00) \
       || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
-      || defined (CONFIG_ARCH_AT91RM9200) \
-      || defined (CONFIG_ARCH_AT91SAM9261) \
+      || defined (CONFIG_ARCH_AT91) \
       || defined (CONFIG_ARCH_PNX4008) \
 	)
 #error "missing bus glue for ohci-hcd"