drm/panel: samsung: Use dev_ based logging

Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-2-sam@ravnborg.org

drivers/gpu/drm/panel/panel-samsung-ld9040.c

@@ -21,7 +21,6 @@
 
 #include <drm/drm_modes.h>
 #include <drm/drm_panel.h>
-#include <drm/drm_print.h>
 
 /* Manufacturer Command Set */
 #define MCS_MANPWR		0xb0
@@ -269,7 +268,7 @@ static int ld9040_get_modes(struct drm_panel *panel,
 
 	mode = drm_mode_create(connector->dev);
 	if (!mode) {
-		DRM_ERROR("failed to create a new display mode\n");
+		dev_err(panel->dev, "failed to create a new display mode\n");
 		return 0;
 	}
 

drivers/gpu/drm/panel/panel-samsung-s6d16d0.c

@@ -7,7 +7,6 @@
 #include <drm/drm_modes.h>
 #include <drm/drm_mipi_dsi.h>
 #include <drm/drm_panel.h>
-#include <drm/drm_print.h>
 
 #include <linux/gpio/consumer.h>
 #include <linux/regulator/consumer.h>
@@ -55,8 +54,7 @@ static int s6d16d0_unprepare(struct drm_panel *panel)
 	/* Enter sleep mode */
 	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
 	if (ret) {
-		DRM_DEV_ERROR(s6->dev, "failed to enter sleep mode (%d)\n",
-			      ret);
+		dev_err(s6->dev, "failed to enter sleep mode (%d)\n", ret);
 		return ret;
 	}
 
@@ -75,7 +73,7 @@ static int s6d16d0_prepare(struct drm_panel *panel)
 
 	ret = regulator_enable(s6->supply);
 	if (ret) {
-		DRM_DEV_ERROR(s6->dev, "failed to enable supply (%d)\n", ret);
+		dev_err(s6->dev, "failed to enable supply (%d)\n", ret);
 		return ret;
 	}
 
@@ -90,15 +88,13 @@ static int s6d16d0_prepare(struct drm_panel *panel)
 	ret = mipi_dsi_dcs_set_tear_on(dsi,
 				       MIPI_DSI_DCS_TEAR_MODE_VBLANK);
 	if (ret) {
-		DRM_DEV_ERROR(s6->dev, "failed to enable vblank TE (%d)\n",
-			      ret);
+		dev_err(s6->dev, "failed to enable vblank TE (%d)\n", ret);
 		return ret;
 	}
 	/* Exit sleep mode and power on */
 	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
 	if (ret) {
-		DRM_DEV_ERROR(s6->dev, "failed to exit sleep mode (%d)\n",
-			      ret);
+		dev_err(s6->dev, "failed to exit sleep mode (%d)\n", ret);
 		return ret;
 	}
 
@@ -113,8 +109,7 @@ static int s6d16d0_enable(struct drm_panel *panel)
 
 	ret = mipi_dsi_dcs_set_display_on(dsi);
 	if (ret) {
-		DRM_DEV_ERROR(s6->dev, "failed to turn display on (%d)\n",
-			      ret);
+		dev_err(s6->dev, "failed to turn display on (%d)\n", ret);
 		return ret;
 	}
 
@@ -129,8 +124,7 @@ static int s6d16d0_disable(struct drm_panel *panel)
 
 	ret = mipi_dsi_dcs_set_display_off(dsi);
 	if (ret) {
-		DRM_DEV_ERROR(s6->dev, "failed to turn display off (%d)\n",
-			      ret);
+		dev_err(s6->dev, "failed to turn display off (%d)\n", ret);
 		return ret;
 	}
 
@@ -144,7 +138,7 @@ static int s6d16d0_get_modes(struct drm_panel *panel,
 
 	mode = drm_mode_duplicate(connector->dev, &samsung_s6d16d0_mode);
 	if (!mode) {
-		DRM_ERROR("bad mode or failed to add mode\n");
+		dev_err(panel->dev, "bad mode or failed to add mode\n");
 		return -EINVAL;
 	}
 	drm_mode_set_name(mode);
@@ -204,8 +198,7 @@ static int s6d16d0_probe(struct mipi_dsi_device *dsi)
 	if (IS_ERR(s6->reset_gpio)) {
 		ret = PTR_ERR(s6->reset_gpio);
 		if (ret != -EPROBE_DEFER)
-			DRM_DEV_ERROR(dev, "failed to request GPIO (%d)\n",
-				      ret);
+			dev_err(dev, "failed to request GPIO (%d)\n", ret);
 		return ret;
 	}
 

drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c

@@ -18,7 +18,6 @@
 #include <drm/drm_mipi_dsi.h>
 #include <drm/drm_modes.h>
 #include <drm/drm_panel.h>
-#include <drm/drm_print.h>
 
 #define S6E3HA2_MIN_BRIGHTNESS		0
 #define S6E3HA2_MAX_BRIGHTNESS		100
@@ -651,7 +650,7 @@ static int s6e3ha2_get_modes(struct drm_panel *panel,
 
 	mode = drm_mode_duplicate(connector->dev, ctx->desc->mode);
 	if (!mode) {
-		DRM_ERROR("failed to add mode %ux%ux@%u\n",
+		dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
 			ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay,
 			drm_mode_vrefresh(ctx->desc->mode));
 		return -ENOMEM;

drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c

@@ -19,7 +19,6 @@
 #include <drm/drm_mipi_dsi.h>
 #include <drm/drm_modes.h>
 #include <drm/drm_panel.h>
-#include <drm/drm_print.h>
 
 #define MCS_LEVEL2_KEY		0xf0
 #define MCS_MTP_KEY		0xf1
@@ -406,7 +405,7 @@ static int s6e63j0x03_get_modes(struct drm_panel *panel,
 
 	mode = drm_mode_duplicate(connector->dev, &default_mode);
 	if (!mode) {
-		DRM_ERROR("failed to add mode %ux%ux@%u\n",
+		dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
 			default_mode.hdisplay, default_mode.vdisplay,
 			drm_mode_vrefresh(&default_mode));
 		return -ENOMEM;

drivers/gpu/drm/panel/panel-samsung-s6e63m0.c

@@ -10,7 +10,6 @@
 
 #include <drm/drm_modes.h>
 #include <drm/drm_panel.h>
-#include <drm/drm_print.h>
 
 #include <linux/backlight.h>
 #include <linux/delay.h>
@@ -157,7 +156,7 @@ static void s6e63m0_dcs_write(struct s6e63m0 *ctx, const u8 *data, size_t len)
 	if (ctx->error < 0 || len == 0)
 		return;
 
-	DRM_DEV_DEBUG(ctx->dev, "writing dcs seq: %*ph\n", (int)len, data);
+	dev_dbg(ctx->dev, "writing dcs seq: %*ph\n", (int)len, data);
 	ret = s6e63m0_spi_write_word(ctx, *data);
 
 	while (!ret && --len) {
@@ -166,8 +165,7 @@ static void s6e63m0_dcs_write(struct s6e63m0 *ctx, const u8 *data, size_t len)
 	}
 
 	if (ret) {
-		DRM_DEV_ERROR(ctx->dev, "error %d writing dcs seq: %*ph\n", ret,
-			      (int)len, data);
+		dev_err(ctx->dev, "error %d writing dcs seq: %*ph\n", ret, (int)len, data);
 		ctx->error = ret;
 	}
 
@@ -368,9 +366,9 @@ static int s6e63m0_get_modes(struct drm_panel *panel,
 
 	mode = drm_mode_duplicate(connector->dev, &default_mode);
 	if (!mode) {
-		DRM_ERROR("failed to add mode %ux%ux@%u\n",
-			  default_mode.hdisplay, default_mode.vdisplay,
-			  drm_mode_vrefresh(&default_mode));
+		dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
+			default_mode.hdisplay, default_mode.vdisplay,
+			drm_mode_vrefresh(&default_mode));
 		return -ENOMEM;
 	}
 
@@ -425,8 +423,7 @@ static int s6e63m0_backlight_register(struct s6e63m0 *ctx)
 						     &props);
 	if (IS_ERR(ctx->bl_dev)) {
 		ret = PTR_ERR(ctx->bl_dev);
-		DRM_DEV_ERROR(dev, "error registering backlight device (%d)\n",
-			      ret);
+		dev_err(dev, "error registering backlight device (%d)\n", ret);
 	}
 
 	return ret;
@@ -453,14 +450,13 @@ static int s6e63m0_probe(struct spi_device *spi)
 	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
 				      ctx->supplies);
 	if (ret < 0) {
-		DRM_DEV_ERROR(dev, "failed to get regulators: %d\n", ret);
+		dev_err(dev, "failed to get regulators: %d\n", ret);
 		return ret;
 	}
 
 	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
 	if (IS_ERR(ctx->reset_gpio)) {
-		DRM_DEV_ERROR(dev, "cannot get reset-gpios %ld\n",
-			      PTR_ERR(ctx->reset_gpio));
+		dev_err(dev, "cannot get reset-gpios %ld\n", PTR_ERR(ctx->reset_gpio));
 		return PTR_ERR(ctx->reset_gpio);
 	}
 
@@ -468,7 +464,7 @@ static int s6e63m0_probe(struct spi_device *spi)
 	spi->mode = SPI_MODE_3;
 	ret = spi_setup(spi);
 	if (ret < 0) {
-		DRM_DEV_ERROR(dev, "spi setup failed.\n");
+		dev_err(dev, "spi setup failed.\n");
 		return ret;
 	}
 

drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c

@@ -25,7 +25,6 @@
 #include <drm/drm_mipi_dsi.h>
 #include <drm/drm_modes.h>
 #include <drm/drm_panel.h>
-#include <drm/drm_print.h>
 
 #define LDI_MTP_LENGTH			24
 #define GAMMA_LEVEL_NUM			25
@@ -928,7 +927,7 @@ static int s6e8aa0_get_modes(struct drm_panel *panel,
 
 	mode = drm_mode_create(connector->dev);
 	if (!mode) {
-		DRM_ERROR("failed to create a new display mode\n");
+		dev_err(panel->dev, "failed to create a new display mode\n");
 		return 0;
 	}