i40e: Add 10GBaseT support

Add driver support for 10GBaseT device.

Change-ID: I4be6ed847ac0bddd220b9878a95c523b32038174
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/i40e/i40e_common.c

@@ -50,6 +50,7 @@ static i40e_status i40e_set_mac_type(struct i40e_hw *hw)
 		case I40E_DEV_ID_QSFP_A:
 		case I40E_DEV_ID_QSFP_B:
 		case I40E_DEV_ID_QSFP_C:
+		case I40E_DEV_ID_10G_BASE_T:
 			hw->mac.type = I40E_MAC_XL710;
 			break;
 		case I40E_DEV_ID_VF:

drivers/net/ethernet/intel/i40e/i40e_ethtool.c

@@ -264,6 +264,14 @@ static int i40e_get_settings(struct net_device *netdev,
 			ecmd->supported = SUPPORTED_10000baseKR_Full;
 			ecmd->advertising = ADVERTISED_10000baseKR_Full;
 			break;
+		case I40E_DEV_ID_10G_BASE_T:
+			ecmd->supported = SUPPORTED_10000baseT_Full |
+					  SUPPORTED_1000baseT_Full |
+					  SUPPORTED_100baseT_Full;
+			ecmd->advertising = ADVERTISED_10000baseT_Full |
+					    ADVERTISED_1000baseT_Full |
+					    ADVERTISED_100baseT_Full;
+			break;
 		default:
 			/* all the rest are 10G/1G */
 			ecmd->supported = SUPPORTED_10000baseT_Full |
@@ -322,9 +330,13 @@ static int i40e_get_settings(struct net_device *netdev,
 	case I40E_PHY_TYPE_10GBASE_CR1:
 	case I40E_PHY_TYPE_10GBASE_T:
 		ecmd->supported = SUPPORTED_Autoneg |
-				  SUPPORTED_10000baseT_Full;
+				  SUPPORTED_10000baseT_Full |
+				  SUPPORTED_1000baseT_Full |
+				  SUPPORTED_100baseT_Full;
 		ecmd->advertising = ADVERTISED_Autoneg |
-				    ADVERTISED_10000baseT_Full;
+				    ADVERTISED_10000baseT_Full |
+				    ADVERTISED_1000baseT_Full |
+				    ADVERTISED_100baseT_Full;
 		break;
 	case I40E_PHY_TYPE_XAUI:
 	case I40E_PHY_TYPE_XFI:
@@ -335,14 +347,22 @@ static int i40e_get_settings(struct net_device *netdev,
 	case I40E_PHY_TYPE_1000BASE_KX:
 	case I40E_PHY_TYPE_1000BASE_T:
 		ecmd->supported = SUPPORTED_Autoneg |
-				  SUPPORTED_1000baseT_Full;
+				  SUPPORTED_10000baseT_Full |
+				  SUPPORTED_1000baseT_Full |
+				  SUPPORTED_100baseT_Full;
 		ecmd->advertising = ADVERTISED_Autoneg |
-				    ADVERTISED_1000baseT_Full;
+				    ADVERTISED_10000baseT_Full |
+				    ADVERTISED_1000baseT_Full |
+				    ADVERTISED_100baseT_Full;
 		break;
 	case I40E_PHY_TYPE_100BASE_TX:
 		ecmd->supported = SUPPORTED_Autoneg |
+				  SUPPORTED_10000baseT_Full |
+				  SUPPORTED_1000baseT_Full |
 				  SUPPORTED_100baseT_Full;
 		ecmd->advertising = ADVERTISED_Autoneg |
+				    ADVERTISED_10000baseT_Full |
+				    ADVERTISED_1000baseT_Full |
 				    ADVERTISED_100baseT_Full;
 		break;
 	case I40E_PHY_TYPE_SGMII:
@@ -426,6 +446,9 @@ static int i40e_get_settings(struct net_device *netdev,
 		case I40E_LINK_SPEED_1GB:
 			ethtool_cmd_speed_set(ecmd, SPEED_1000);
 			break;
+		case I40E_LINK_SPEED_100MB:
+			ethtool_cmd_speed_set(ecmd, SPEED_100);
+			break;
 		default:
 			break;
 		}
@@ -528,7 +551,7 @@ static int i40e_set_settings(struct net_device *netdev,
 		}
 		/* If autoneg is currently enabled */
 		if (hw->phy.link_info.an_info & I40E_AQ_AN_COMPLETED) {
-			config.abilities = abilities.abilities |
+			config.abilities = abilities.abilities &
 					   ~I40E_AQ_PHY_ENABLE_AN;
 			change = true;
 		}

drivers/net/ethernet/intel/i40e/i40e_main.c

@@ -74,6 +74,7 @@ static const struct pci_device_id i40e_pci_tbl[] = {
 	{PCI_VDEVICE(INTEL, I40E_DEV_ID_QSFP_A), 0},
 	{PCI_VDEVICE(INTEL, I40E_DEV_ID_QSFP_B), 0},
 	{PCI_VDEVICE(INTEL, I40E_DEV_ID_QSFP_C), 0},
+	{PCI_VDEVICE(INTEL, I40E_DEV_ID_10G_BASE_T), 0},
 	/* required last entry */
 	{0, }
 };
@@ -4449,6 +4450,9 @@ static void i40e_print_link_message(struct i40e_vsi *vsi, bool isup)
 	case I40E_LINK_SPEED_1GB:
 		strlcpy(speed, "1000 Mbps", SPEED_SIZE);
 		break;
+	case I40E_LINK_SPEED_100MB:
+		strncpy(speed, "100 Mbps", SPEED_SIZE);
+		break;
 	default:
 		break;
 	}

drivers/net/ethernet/intel/i40e/i40e_type.h

@@ -43,6 +43,7 @@
 #define I40E_DEV_ID_QSFP_A		0x1583
 #define I40E_DEV_ID_QSFP_B		0x1584
 #define I40E_DEV_ID_QSFP_C		0x1585
+#define I40E_DEV_ID_10G_BASE_T		0x1586
 #define I40E_DEV_ID_VF			0x154C
 #define I40E_DEV_ID_VF_HV		0x1571