Merge tag 'mips_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - DT cleanups

 - fix for early use of kzalloc on mt7621 platform

 - cleanups and fixes

* tag 'mips_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (21 commits)
  MIPS: OCTEON: warn only once if deprecated link status is being used
  MIPS: BCM63xx: Add check for NULL for clk in clk_enable
  platform/mips: Adjust Kconfig to keep consistency
  MIPS: OCTEON: cvmx-bootmem: use strscpy() to instead of strncpy()
  MIPS: mscc: jaguar2: Fix pca9545 i2c-mux node names
  mips/pci: use devm_platform_ioremap_resource()
  mips: ralink: mt7621: do not use kzalloc too early
  mips: ralink: mt7621: soc queries and tests as functions
  mips: ralink: mt7621: define MT7621_SYSC_BASE with __iomem
  MIPS: Restore symbol versions for copy_page_cpu and clear_page_cpu
  mips: dts: remove label = "cpu" from DSA dt-binding
  mips: ralink: mt7621: change DSA port labels to generic naming
  mips: ralink: mt7621: fix phy-mode of external phy on GB-PC2
  MIPS: vpe-cmp: fix possible memory leak while module exiting
  MIPS: vpe-mt: fix possible memory leak while module exiting
  dt-bindings: mips: brcm: add Broadcom SoCs bindings
  dt-bindings: mips: add CPU bindings for MIPS architecture
  mips: dts: brcm: bcm7435: add "interrupt-names" for NAND controller
  mips: dts: bcm63268: add TWD block timer
  MIPS: Use "grep -E" instead of "egrep"
  ...

Documentation/devicetree/bindings/mips/brcm/brcm,bmips.txt

-* Broadcom MIPS (BMIPS) CPUs
-
-Required properties:
-- compatible: "brcm,bmips3300", "brcm,bmips4350", "brcm,bmips4380",
-  "brcm,bmips5000"
-
-- mips-hpt-frequency: This is common to all CPUs in the system so it lives
-  under the "cpus" node.

Documentation/devicetree/bindings/mips/brcm/soc.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/brcm/soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom cable/DSL/settop platforms
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+description: |
+    Boards Broadcom cable/DSL/settop SoC shall have the following properties.
+    The experimental -viper variants are for running Linux on the 3384's
+    BMIPS4355 cable modem CPU instead of the BMIPS5000 application processor.
+
+properties:
+  $nodename:
+    const: '/'
+
+  compatible:
+    enum:
+      - brcm,bcm3368
+      - brcm,bcm3384
+      - brcm,bcm33843
+      - brcm,bcm3384-viper
+      - brcm,bcm33843-viper
+      - brcm,bcm6328
+      - brcm,bcm6358
+      - brcm,bcm6362
+      - brcm,bcm6368
+      - brcm,bcm63168
+      - brcm,bcm63268
+      - brcm,bcm7125
+      - brcm,bcm7346
+      - brcm,bcm7358
+      - brcm,bcm7360
+      - brcm,bcm7362
+      - brcm,bcm7420
+      - brcm,bcm7425
+
+  cpus:
+    type: object
+    additionalProperties: false
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      mips-hpt-frequency:
+        description: MIPS counter high precision timer frequency.
+         This is common to all CPUs in the system so it lives
+         under the "cpus" node.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    patternProperties:
+      "^cpu@[0-9]$":
+        type: object
+        $ref: /schemas/mips/cpus.yaml#
+        unevaluatedProperties: false
+
+    required:
+      - mips-hpt-frequency
+
+additionalProperties: true
+
+examples:
+  - |
+     / {
+         compatible = "brcm,bcm3368";
+         #address-cells = <1>;
+         #size-cells = <1>;
+         model = "Broadcom 3368";
+
+         cpus {
+           #address-cells = <1>;
+           #size-cells = <0>;
+
+           mips-hpt-frequency = <150000000>;
+
+           cpu@0 {
+             compatible = "brcm,bmips4350";
+             device_type = "cpu";
+             reg = <0>;
+           };
+
+           cpu@1 {
+             compatible = "brcm,bmips4350";
+             device_type = "cpu";
+             reg = <1>;
+           };
+         };
+       };
+...

Documentation/devicetree/bindings/mips/cpus.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/cpus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS CPUs bindings
+
+maintainers:
+  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
+
+description: |
+  The device tree allows to describe the layout of CPUs in a system through
+  the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
+  defining properties for every CPU.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bmips3300
+      - brcm,bmips4350
+      - brcm,bmips4380
+      - brcm,bmips5000
+      - brcm,bmips5200
+      - ingenic,xburst-mxu1.0
+      - ingenic,xburst-fpu1.0-mxu1.1
+      - ingenic,xburst-fpu2.0-mxu2.0
+      - ingenic,xburst2-fpu2.1-mxu2.1-smt
+      - loongson,gs264
+      - mips,m14Kc
+      - mips,mips4Kc
+      - mips,mips4KEc
+      - mips,mips24Kc
+      - mips,mips24KEc
+      - mips,mips74Kc
+      - mips,mips1004Kc
+      - mti,interaptiv
+      - mti,mips24KEc
+      - mti,mips14KEc
+      - mti,mips14Kc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  device_type: true
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ingenic,xburst-mxu1.0
+              - ingenic,xburst-fpu1.0-mxu1.1
+              - ingenic,xburst-fpu2.0-mxu2.0
+              - ingenic,xburst2-fpu2.1-mxu2.1-smt
+    then:
+      required:
+        - device_type
+        - clocks
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    cpus {
+      #size-cells = <0>;
+      #address-cells = <1>;
+
+      cpu@0 {
+        compatible = "mips,mips1004Kc";
+        device_type = "cpu";
+        reg = <0>;
+      };
+
+      cpu@1 {
+        compatible = "mips,mips1004Kc";
+        device_type = "cpu";
+        reg = <1>;
+      };
+    };
+
+  - |
+    // Example 2 (Ingenic CPU)
+    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+
+    cpus {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      cpu@0 {
+        compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+        device_type = "cpu";
+        reg = <0>;
+
+        clocks = <&cgu JZ4780_CLK_CPU>;
+      };
+
+      cpu@1 {
+        compatible = "ingenic,xburst-fpu1.0-mxu1.1";
+        device_type = "cpu";
+        reg = <1>;
+
+        clocks = <&cgu JZ4780_CLK_CORE1>;
+      };
+    };
+...

Documentation/devicetree/bindings/mips/ingenic/ingenic,cpu.yaml

-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/mips/ingenic/ingenic,cpu.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Bindings for Ingenic XBurst family CPUs
-
-maintainers:
-  - 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
-
-description:
-  Ingenic XBurst family CPUs shall have the following properties.
-
-properties:
-  compatible:
-    oneOf:
-
-      - description: Ingenic XBurst®1 CPU Cores
-        enum:
-          - ingenic,xburst-mxu1.0
-          - ingenic,xburst-fpu1.0-mxu1.1
-          - ingenic,xburst-fpu2.0-mxu2.0
-
-      - description: Ingenic XBurst®2 CPU Cores
-        enum:
-          - ingenic,xburst2-fpu2.1-mxu2.1-smt
-
-  reg:
-    maxItems: 1
-
-  clocks:
-    maxItems: 1
-
-  device_type: true
-
-required:
-  - device_type
-  - compatible
-  - reg
-  - clocks
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
-
-    cpus {
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        cpu0: cpu@0 {
-                device_type = "cpu";
-                compatible = "ingenic,xburst-fpu1.0-mxu1.1";
-                reg = <0>;
-
-                clocks = <&cgu JZ4780_CLK_CPU>;
-        };
-
-        cpu1: cpu@1 {
-                device_type = "cpu";
-                compatible = "ingenic,xburst-fpu1.0-mxu1.1";
-                reg = <1>;
-
-                clocks = <&cgu JZ4780_CLK_CORE1>;
-        };
-    };
-...

arch/mips/Makefile

@@ -318,7 +318,7 @@ KBUILD_LDFLAGS		+= -m $(ld-emul)
 
 ifdef CONFIG_MIPS
 CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \
-	egrep -vw '__GNUC_(MINOR_|PATCHLEVEL_)?_' | \
+	grep -E -vw '__GNUC_(MINOR_|PATCHLEVEL_)?_' | \
 	sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/" -e 's/\$$/&&/g')
 endif
 

arch/mips/bcm63xx/clk.c

@@ -361,6 +361,8 @@ static struct clk clk_periph = {
  */
 int clk_enable(struct clk *clk)
 {
+	if (!clk)
+		return 0;
 	mutex_lock(&clocks_mutex);
 	clk_enable_unlocked(clk);
 	mutex_unlock(&clocks_mutex);

arch/mips/boot/dts/brcm/bcm63268.dtsi

@@ -110,6 +110,11 @@ timer-mfd@10000080 {
 			reg = <0x10000080 0x30>;
 			ranges = <0x0 0x10000080 0x30>;
 
+			timer@0 {
+				compatible = "brcm,bcm6345-timer";
+				reg = <0x0 0x1c>;
+			};
+
 			wdt: watchdog@1c {
 				compatible = "brcm,bcm7038-wdt";
 				reg = <0x1c 0xc>;

arch/mips/boot/dts/brcm/bcm7435.dtsi

@@ -422,6 +422,7 @@ nand: nand@41c800 {
 			reg = <0x41c800 0x600>, <0x41d000 0x100>;
 			interrupt-parent = <&hif_l2_intc>;
 			interrupts = <24>, <4>;
+			interrupt-names = "nand_ctlrdy", "flash_dma_done";
 			status = "disabled";
 		};
 

arch/mips/boot/dts/ingenic/ci20.dts

@@ -438,7 +438,7 @@ dm9000@6 {
 		ingenic,nemc-tAW = <50>;
 		ingenic,nemc-tSTRV = <100>;
 
-		reset-gpios = <&gpf 12 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>;
 		vcc-supply = <&eth0_power>;
 
 		interrupt-parent = <&gpe>;

arch/mips/boot/dts/mscc/jaguar2_pcb110.dts

@@ -208,7 +208,7 @@ i2cmux_3: i2cmux-3-pins {
 };
 
 &i2c0 {
-	pca9545@70 {
+	i2c-mux@70 {
 		compatible = "nxp,pca9545";
 		reg = <0x70>;
 		#address-cells = <1>;
@@ -236,7 +236,7 @@ i2c127: i2c@3 {
 			reg = <3>;
 		};
 	};
-	pca9545@71 {
+	i2c-mux@71 {
 		compatible = "nxp,pca9545";
 		reg = <0x71>;
 		#address-cells = <1>;

arch/mips/boot/dts/qca/ar9331.dtsi

@@ -176,7 +176,6 @@ ports {
 
 						switch_port0: port@0 {
 							reg = <0x0>;
-							label = "cpu";
 							ethernet = <&eth1>;
 
 							phy-mode = "gmii";

arch/mips/boot/dts/ralink/mt7621-gnubee-gb-pc2.dts

@@ -113,13 +113,13 @@ &pcie {
 
 &gmac1 {
 	status = "okay";
+	phy-mode = "rgmii-rxid";
 	phy-handle = <&ethphy5>;
 };
 
 &mdio {
 	ethphy5: ethernet-phy@5 {
 		reg = <5>;
-		phy-mode = "rgmii-rxid";
 	};
 };
 

arch/mips/boot/dts/ralink/mt7621.dtsi

@@ -357,36 +357,35 @@ ports {
 					port@0 {
 						status = "disabled";
 						reg = <0>;
-						label = "lan0";
+						label = "swp0";
 					};
 
 					port@1 {
 						status = "disabled";
 						reg = <1>;
-						label = "lan1";
+						label = "swp1";
 					};
 
 					port@2 {
 						status = "disabled";
 						reg = <2>;
-						label = "lan2";
+						label = "swp2";
 					};
 
 					port@3 {
 						status = "disabled";
 						reg = <3>;
-						label = "lan3";
+						label = "swp3";
 					};
 
 					port@4 {
 						status = "disabled";
 						reg = <4>;
-						label = "lan4";
+						label = "swp4";
 					};
 
 					port@6 {
 						reg = <6>;
-						label = "cpu";
 						ethernet = <&gmac0>;
 						phy-mode = "trgmii";
 

arch/mips/cavium-octeon/executive/cvmx-bootmem.c

@@ -780,9 +780,8 @@ int64_t cvmx_bootmem_phy_named_block_alloc(uint64_t size, uint64_t min_addr,
 	if (addr_allocated >= 0) {
 		named_block_desc_ptr->base_addr = addr_allocated;
 		named_block_desc_ptr->size = size;
-		strncpy(named_block_desc_ptr->name, name,
+		strscpy(named_block_desc_ptr->name, name,
 			cvmx_bootmem_desc->named_block_name_len);
-		named_block_desc_ptr->name[cvmx_bootmem_desc->named_block_name_len - 1] = 0;
 	}
 
 	if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING))

arch/mips/cavium-octeon/executive/cvmx-helper-board.c

@@ -211,7 +211,7 @@ union cvmx_helper_link_info __cvmx_helper_board_link_get(int ipd_port)
 {
 	union cvmx_helper_link_info result;
 
-	WARN(!octeon_is_simulation(),
+	WARN_ONCE(!octeon_is_simulation(),
 	     "Using deprecated link status - please update your DT");
 
 	/* Unless we fix it later, all links are defaulted to down */

arch/mips/cavium-octeon/executive/cvmx-helper.c

@@ -1096,7 +1096,7 @@ union cvmx_helper_link_info cvmx_helper_link_get(int ipd_port)
 		if (index == 0)
 			result = __cvmx_helper_rgmii_link_get(ipd_port);
 		else {
-			WARN(1, "Using deprecated link status - please update your DT");
+			WARN_ONCE(1, "Using deprecated link status - please update your DT");
 			result.s.full_duplex = 1;
 			result.s.link_up = 1;
 			result.s.speed = 1000;

arch/mips/include/asm/asm-prototypes.h

@@ -6,3 +6,6 @@
 #include <linux/uaccess.h>
 #include <asm/ftrace.h>
 #include <asm/mmu_context.h>
+
+extern void clear_page_cpu(void *page);
+extern void copy_page_cpu(void *to, void *from);

arch/mips/include/asm/mach-ralink/mt7621.h

@@ -7,10 +7,12 @@
 #ifndef _MT7621_REGS_H_
 #define _MT7621_REGS_H_
 
+#define IOMEM(x)			((void __iomem *)(KSEG1ADDR(x)))
+
 #define MT7621_PALMBUS_BASE		0x1C000000
 #define MT7621_PALMBUS_SIZE		0x03FFFFFF
 
-#define MT7621_SYSC_BASE		0x1E000000
+#define MT7621_SYSC_BASE		IOMEM(0x1E000000)
 
 #define SYSC_REG_CHIP_NAME0		0x00
 #define SYSC_REG_CHIP_NAME1		0x04

arch/mips/kernel/vpe-cmp.c

@@ -75,7 +75,6 @@ ATTRIBUTE_GROUPS(vpe);
 
 static void vpe_device_release(struct device *cd)
 {
-	kfree(cd);
 }
 
 static struct class vpe_class = {
@@ -157,6 +156,7 @@ int __init vpe_module_init(void)
 	device_del(&vpe_device);
 
 out_class:
+	put_device(&vpe_device);
 	class_unregister(&vpe_class);
 
 out_chrdev:
@@ -169,7 +169,7 @@ void __exit vpe_module_exit(void)
 {
 	struct vpe *v, *n;
 
-	device_del(&vpe_device);
+	device_unregister(&vpe_device);
 	class_unregister(&vpe_class);
 	unregister_chrdev(major, VPE_MODULE_NAME);
 

arch/mips/kernel/vpe-mt.c

@@ -313,7 +313,6 @@ ATTRIBUTE_GROUPS(vpe);
 
 static void vpe_device_release(struct device *cd)
 {
-	kfree(cd);
 }
 
 static struct class vpe_class = {
@@ -497,6 +496,7 @@ int __init vpe_module_init(void)
 	device_del(&vpe_device);
 
 out_class:
+	put_device(&vpe_device);
 	class_unregister(&vpe_class);
 
 out_chrdev:
@@ -509,7 +509,7 @@ void __exit vpe_module_exit(void)
 {
 	struct vpe *v, *n;
 
-	device_del(&vpe_device);
+	device_unregister(&vpe_device);
 	class_unregister(&vpe_class);
 	unregister_chrdev(major, VPE_MODULE_NAME);
 

arch/mips/pci/pci-rt3883.c

@@ -404,7 +404,6 @@ static int rt3883_pci_probe(struct platform_device *pdev)
 	struct rt3883_pci_controller *rpc;
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
-	struct resource *res;
 	struct device_node *child;
 	u32 val;
 	int err;
@@ -414,8 +413,7 @@ static int rt3883_pci_probe(struct platform_device *pdev)
 	if (!rpc)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	rpc->base = devm_ioremap_resource(dev, res);
+	rpc->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(rpc->base))
 		return PTR_ERR(rpc->base);
 

arch/mips/ralink/mt7621.c

@@ -25,6 +25,7 @@
 #define MT7621_MEM_TEST_PATTERN         0xaa5555aa
 
 static u32 detect_magic __initdata;
+static struct ralink_soc_info *soc_info_ptr;
 
 int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
 {
@@ -97,41 +98,83 @@ void __init ralink_of_remap(void)
 		panic("Failed to remap core resources");
 }
 
-static void soc_dev_init(struct ralink_soc_info *soc_info, u32 rev)
+static unsigned int __init mt7621_get_soc_name0(void)
+{
+	return __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_NAME0);
+}
+
+static unsigned int __init mt7621_get_soc_name1(void)
+{
+	return __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_NAME1);
+}
+
+static bool __init mt7621_soc_valid(void)
+{
+	if (mt7621_get_soc_name0() == MT7621_CHIP_NAME0 &&
+			mt7621_get_soc_name1() == MT7621_CHIP_NAME1)
+		return true;
+	else
+		return false;
+}
+
+static const char __init *mt7621_get_soc_id(void)
+{
+	if (mt7621_soc_valid())
+		return "MT7621";
+	else
+		return "invalid";
+}
+
+static unsigned int __init mt7621_get_soc_rev(void)
+{
+	return __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_REV);
+}
+
+static unsigned int __init mt7621_get_soc_ver(void)
+{
+	return (mt7621_get_soc_rev() >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK;
+}
+
+static unsigned int __init mt7621_get_soc_eco(void)
+{
+	return (mt7621_get_soc_rev() & CHIP_REV_ECO_MASK);
+}
+
+static const char __init *mt7621_get_soc_revision(void)
+{
+	if (mt7621_get_soc_rev() == 1 && mt7621_get_soc_eco() == 1)
+		return "E2";
+	else
+		return "E1";
+}
+
+static int __init mt7621_soc_dev_init(void)
 {
 	struct soc_device *soc_dev;
 	struct soc_device_attribute *soc_dev_attr;
 
 	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
 	if (!soc_dev_attr)
-		return;
+		return -ENOMEM;
 
 	soc_dev_attr->soc_id = "mt7621";
 	soc_dev_attr->family = "Ralink";
+	soc_dev_attr->revision = mt7621_get_soc_revision();
 
-	if (((rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK) == 1 &&
-	    (rev & CHIP_REV_ECO_MASK) == 1)
-		soc_dev_attr->revision = "E2";
-	else
-		soc_dev_attr->revision = "E1";
-
-	soc_dev_attr->data = soc_info;
+	soc_dev_attr->data = soc_info_ptr;
 
 	soc_dev = soc_device_register(soc_dev_attr);
 	if (IS_ERR(soc_dev)) {
 		kfree(soc_dev_attr);
-		return;
+		return PTR_ERR(soc_dev);
 	}
+
+	return 0;
 }
+device_initcall(mt7621_soc_dev_init);
 
 void __init prom_soc_init(struct ralink_soc_info *soc_info)
 {
-	void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE);
-	unsigned char *name = NULL;
-	u32 n0;
-	u32 n1;
-	u32 rev;
-
 	/* Early detection of CMP support */
 	mips_cm_probe();
 	mips_cpc_probe();
@@ -154,27 +197,23 @@ void __init prom_soc_init(struct ralink_soc_info *soc_info)
 		__sync();
 	}
 
-	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
-	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
-
-	if (n0 == MT7621_CHIP_NAME0 && n1 == MT7621_CHIP_NAME1) {
-		name = "MT7621";
+	if (mt7621_soc_valid())
 		soc_info->compatible = "mediatek,mt7621-soc";
-	} else {
-		panic("mt7621: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
-	}
+	else
+		panic("mt7621: unknown SoC, n0:%08x n1:%08x\n",
+				mt7621_get_soc_name0(),
+				mt7621_get_soc_name1());
 	ralink_soc = MT762X_SOC_MT7621AT;
-	rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
 
 	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
 		"MediaTek %s ver:%u eco:%u",
-		name,
-		(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
-		(rev & CHIP_REV_ECO_MASK));
+		mt7621_get_soc_id(),
+		mt7621_get_soc_ver(),
+		mt7621_get_soc_eco());
 
 	soc_info->mem_detect = mt7621_memory_detect;
 
-	soc_dev_init(soc_info, rev);
+	soc_info_ptr = soc_info;
 
 	if (!register_cps_smp_ops())
 		return;

arch/mips/vdso/Makefile

@@ -71,7 +71,7 @@ KCOV_INSTRUMENT := n
 
 # Check that we don't have PIC 'jalr t9' calls left
 quiet_cmd_vdso_mips_check = VDSOCHK $@
-      cmd_vdso_mips_check = if $(OBJDUMP) --disassemble $@ | egrep -h "jalr.*t9" > /dev/null; \
+      cmd_vdso_mips_check = if $(OBJDUMP) --disassemble $@ | grep -E -h "jalr.*t9" > /dev/null; \
 		       then (echo >&2 "$@: PIC 'jalr t9' calls are not supported"; \
 			     rm -f $@; /bin/false); fi
 

drivers/platform/Kconfig

 # SPDX-License-Identifier: GPL-2.0-only
-if MIPS
 source "drivers/platform/mips/Kconfig"
-endif
 
 source "drivers/platform/loongarch/Kconfig"
 

drivers/platform/mips/Kconfig

@@ -6,6 +6,7 @@
 menuconfig MIPS_PLATFORM_DEVICES
 	bool "MIPS Platform Specific Device Drivers"
 	default y
+	depends on MIPS
 	help
 	  Say Y here to get to see options for device drivers of various
 	  MIPS platforms, including vendor-specific netbook/laptop/desktop