ide-pmac: fix drive->init_speed reporting

pmac_ide_tune_chipset() don't set drive->init_speed.

Fix it by setting drive->{current,init}_speed in pmac_ide_do_setfeature()
and clean up pmac_ide_{tune_chipset,mdma_enable,udma_enable}().
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drivers/ide/ppc/pmac.c

@@ -604,6 +604,9 @@ pmac_ide_do_setfeature(ide_drive_t *drive, u8 command)
 				drive->id->dma_1word |= 0x0101; break;
 			default: break;
 		}
+		if (!drive->init_speed)
+			drive->init_speed = command;
+		drive->current_speed = command;
 	}
 	enable_irq(hwif->irq);
 	return result;
@@ -986,7 +989,6 @@ pmac_ide_tune_chipset (ide_drive_t *drive, byte speed)
 		return ret;
 		
 	pmac_ide_do_update_timings(drive);	
-	drive->current_speed = speed;
 
 	return 0;
 }
@@ -1737,11 +1739,6 @@ pmac_ide_mdma_enable(ide_drive_t *drive, u16 mode)
 	/* Apply timings to controller */
 	*timings = timing_local[0];
 	*timings2 = timing_local[1];
-	
-	/* Set speed info in drive */
-	drive->current_speed = mode;	
-	if (!drive->init_speed)
-		drive->init_speed = mode;
 
 	return 1;
 }
@@ -1793,11 +1790,6 @@ pmac_ide_udma_enable(ide_drive_t *drive, u16 mode)
 	*timings = timing_local[0];
 	*timings2 = timing_local[1];
 
-	/* Set speed info in drive */
-	drive->current_speed = mode;	
-	if (!drive->init_speed)
-		drive->init_speed = mode;
-
 	return 1;
 }