Merge tag 'mmc-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix initialization of block size when ext_csd isn't present

  MMC host:
   - sdhci-brcmstb: Fix mmc timeout errors on S5 suspend
   - sdhci-of-dwcmshc: Fix request accessing RPMB
   - sdhci-xenon: Fix 1.8v regulator stabilization"

* tag 'mmc-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: don't initialize block size from ext_csd if not present
  mmc: sdhci-brcmstb: Fix mmc timeout errors on S5 suspend
  mmc: sdhci-xenon: fix 1.8v regulator stabilization
  mmc: sdhci-of-dwcmshc: fix rpmb access

drivers/mmc/core/queue.c

@@ -384,8 +384,10 @@ static void mmc_setup_queue(struct mmc_queue *mq, struct mmc_card *card)
 		     "merging was advertised but not possible");
 	blk_queue_max_segments(mq->queue, mmc_get_max_segments(host));
 
-	if (mmc_card_mmc(card))
+	if (mmc_card_mmc(card) && card->ext_csd.data_sector_size) {
 		block_size = card->ext_csd.data_sector_size;
+		WARN_ON(block_size != 512 && block_size != 4096);
+	}
 
 	blk_queue_logical_block_size(mq->queue, block_size);
 	/*

drivers/mmc/host/sdhci-brcmstb.c

@@ -314,11 +314,7 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev)
 
 static void sdhci_brcmstb_shutdown(struct platform_device *pdev)
 {
-	int ret;
-
-	ret = sdhci_pltfm_unregister(pdev);
-	if (ret)
-		dev_err(&pdev->dev, "failed to shutdown\n");
+	sdhci_pltfm_suspend(&pdev->dev);
 }
 
 MODULE_DEVICE_TABLE(of, sdhci_brcm_of_match);

drivers/mmc/host/sdhci-of-dwcmshc.c

@@ -16,6 +16,8 @@
 
 #include "sdhci-pltfm.h"
 
+#define SDHCI_DWCMSHC_ARG2_STUFF	GENMASK(31, 16)
+
 /* DWCMSHC specific Mode Select value */
 #define DWCMSHC_CTRL_HS400		0x7
 
@@ -49,6 +51,29 @@ static void dwcmshc_adma_write_desc(struct sdhci_host *host, void **desc,
 	sdhci_adma_write_desc(host, desc, addr, len, cmd);
 }
 
+static void dwcmshc_check_auto_cmd23(struct mmc_host *mmc,
+				     struct mmc_request *mrq)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+
+	/*
+	 * No matter V4 is enabled or not, ARGUMENT2 register is 32-bit
+	 * block count register which doesn't support stuff bits of
+	 * CMD23 argument on dwcmsch host controller.
+	 */
+	if (mrq->sbc && (mrq->sbc->arg & SDHCI_DWCMSHC_ARG2_STUFF))
+		host->flags &= ~SDHCI_AUTO_CMD23;
+	else
+		host->flags |= SDHCI_AUTO_CMD23;
+}
+
+static void dwcmshc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+	dwcmshc_check_auto_cmd23(mmc, mrq);
+
+	sdhci_request(mmc, mrq);
+}
+
 static void dwcmshc_set_uhs_signaling(struct sdhci_host *host,
 				      unsigned int timing)
 {
@@ -133,6 +158,8 @@ static int dwcmshc_probe(struct platform_device *pdev)
 
 	sdhci_get_of_property(pdev);
 
+	host->mmc_host_ops.request = dwcmshc_request;
+
 	err = sdhci_add_host(host);
 	if (err)
 		goto err_clk;

drivers/mmc/host/sdhci-xenon.c

@@ -168,7 +168,12 @@ static void xenon_reset_exit(struct sdhci_host *host,
 	/* Disable tuning request and auto-retuning again */
 	xenon_retune_setup(host);
 
-	xenon_set_acg(host, true);
+	/*
+	 * The ACG should be turned off at the early init time, in order
+	 * to solve a possible issues with the 1.8V regulator stabilization.
+	 * The feature is enabled in later stage.
+	 */
+	xenon_set_acg(host, false);
 
 	xenon_set_sdclk_off_idle(host, sdhc_id, false);