Commit 59ac2149 authored by Mark Brown's avatar Mark Brown

ASoC: wm8523: Move device ID verification and reset to I2C probe

Ensure that we have confirmed that we've got the device in place before
we register with ASoC.
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent b9288f49
......@@ -68,11 +68,6 @@ static bool wm8523_volatile_register(struct device *dev, unsigned int reg)
}
}
static int wm8523_reset(struct snd_soc_codec *codec)
{
return snd_soc_write(codec, WM8523_DEVICE_ID, 0);
}
static const DECLARE_TLV_DB_SCALE(dac_tlv, -10000, 25, 0);
static const char *wm8523_zd_count_text[] = {
......@@ -409,38 +404,6 @@ static int wm8523_probe(struct snd_soc_codec *codec)
return ret;
}
ret = regulator_bulk_enable(ARRAY_SIZE(wm8523->supplies),
wm8523->supplies);
if (ret != 0) {
dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
goto err_get;
}
ret = snd_soc_read(codec, WM8523_DEVICE_ID);
if (ret < 0) {
dev_err(codec->dev, "Failed to read ID register\n");
goto err_enable;
}
if (ret != 0x8523) {
dev_err(codec->dev, "Device is not a WM8523, ID is %x\n", ret);
ret = -EINVAL;
goto err_enable;
}
ret = snd_soc_read(codec, WM8523_REVISION);
if (ret < 0) {
dev_err(codec->dev, "Failed to read revision register\n");
goto err_enable;
}
dev_info(codec->dev, "revision %c\n",
(ret & WM8523_CHIP_REV_MASK) + 'A');
ret = wm8523_reset(codec);
if (ret < 0) {
dev_err(codec->dev, "Failed to issue reset\n");
goto err_enable;
}
/* Change some default settings - latch VU and enable ZC */
snd_soc_update_bits(codec, WM8523_DAC_GAINR,
WM8523_DACR_VU, WM8523_DACR_VU);
......@@ -448,16 +411,7 @@ static int wm8523_probe(struct snd_soc_codec *codec)
wm8523_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* Bias level configuration will have done an extra enable */
regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
return 0;
err_enable:
regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
err_get:
return ret;
}
static int wm8523_remove(struct snd_soc_codec *codec)
......@@ -503,6 +457,7 @@ static __devinit int wm8523_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct wm8523_priv *wm8523;
unsigned int val;
int ret, i;
wm8523 = devm_kzalloc(&i2c->dev, sizeof(struct wm8523_priv),
......@@ -527,6 +482,40 @@ static __devinit int wm8523_i2c_probe(struct i2c_client *i2c,
return ret;
}
ret = regulator_bulk_enable(ARRAY_SIZE(wm8523->supplies),
wm8523->supplies);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
return ret;
}
ret = regmap_read(wm8523->regmap, WM8523_DEVICE_ID, &val);
if (ret < 0) {
dev_err(&i2c->dev, "Failed to read ID register\n");
goto err_enable;
}
if (val != 0x8523) {
dev_err(&i2c->dev, "Device is not a WM8523, ID is %x\n", ret);
ret = -EINVAL;
goto err_enable;
}
ret = regmap_read(wm8523->regmap, WM8523_REVISION, &val);
if (ret < 0) {
dev_err(&i2c->dev, "Failed to read revision register\n");
goto err_enable;
}
dev_info(&i2c->dev, "revision %c\n",
(val & WM8523_CHIP_REV_MASK) + 'A');
ret = regmap_write(wm8523->regmap, WM8523_DEVICE_ID, 0x8523);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to reset device: %d\n", ret);
goto err_enable;
}
regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
i2c_set_clientdata(i2c, wm8523);
ret = snd_soc_register_codec(&i2c->dev,
......@@ -534,6 +523,9 @@ static __devinit int wm8523_i2c_probe(struct i2c_client *i2c,
return ret;
err_enable:
regulator_bulk_disable(ARRAY_SIZE(wm8523->supplies), wm8523->supplies);
return ret;
}
static __devexit int wm8523_i2c_remove(struct i2c_client *client)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment